Results 1 to 2 of 2

Thread: Alfa AWUS036NHV working with kali

  1. #1
    Join Date
    2014-Nov
    Location
    the moon
    Posts
    1

    Alfa AWUS036NHV working with kali

    Ask for help to solve the following problem:
    Operating System: Kali-Linux-3.14-vm-amd64.
    Wireless adapter: Alfa AWUS036NHV

    Hello all,
    I have been trying to find a answer to this problem for a bit and nothing on google or an already existing form post cover this alfa so i hope to find a answer for any other person who is stuck like me!
    My main goal is to be able to use this alfa to do packit sniffing wifi cracking and other wifi related things.
    So I have found this alfa is not fully out of box supported how ever it can be seen by kali, here are some commands with there outputs,

    lsusb
    Code:
    root@kali:/# lsusb
    Bus 001 Device 002: ID 0bda:8179 Realtek Semiconductor Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 004: ID 0e0f:0008 VMware, Inc.
    Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
    Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    iwconfig
    Code:
    root@kali:/# iwconfig
    eth0      no wireless extensions.
    
    lo        no wireless extensions.
    
    wlan0  unassociated  Nickname:"<WIFI@REALTEK>"
              Mode:Managed  Frequency=2.412 GHz  Access Point: Not-Associated
              Sensitivity:0/0
              Retry:off   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
              Link Quality:0  Signal level:0  Noise level:0
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0
    airmon-ng
    Code:
    root@kali:/# airmon-ng
    
    
    Interface       Chipset         Driver
    dmesg | tail
    Code:
    root@kali:~# dmesg | tail
    [96747.696818] usb 1-1: USB disconnect, device number 2
    [96766.960471] usb 1-1: new high-speed USB device number 3 using ehci-pci
    [96767.254478] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179
    [96767.254482] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [96767.254485] usb 1-1: Product: 802.11n NIC
    [96767.254486] usb 1-1: Manufacturer: Realtek
    [96767.260331] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
    [96767.563750] r8188eu 1-1:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
    [96769.249760] MAC Address = 00:c0:ca:85:07:1a
    [96769.315203] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    When looking for wifi in my area it shows this http://imgur.com/719CYYj

    Best Regards and thanks for the help,

  2. #2
    Join Date
    2014-Jun
    Location
    Greece
    Posts
    133
    Hi there!
    Maybe I'm missing something somewhere but as far as I know RTL8188EU doesn't support injection and the developer (Mark Greaves) of the driver doesn't seems to be interest to make that driver to support injection.

    Take a look here:
    http://linuxforums.org.uk/index.php?...95881#msg95881

    You're best off asking on the aircrack-ng forum:
    http://forum.aircrack-ng.org/

    I know little about it.

    It's my intention to help people with Linux problems, not breaking wireless encryption (even for legitimate purposes).
    Even in aircrack forums there are some references about incomparability of aircrack-ng suite and RTL8188EU driver.
    http://forum.aircrack-ng.org/index.php?topic=389.0

    As I said, maybe I missing something. I've done a very quick research.
    So, in short, the results you're getting are normal. Unpleasant, but normal..
    Security always begins with personal responsibility. - quietman7

Similar Threads

  1. Replies: 0
    Last Post: 2015-06-03, 14:10
  2. Installing Driver awus036nhv in Kali Linux
    By nix00 in forum Installing Archive
    Replies: 3
    Last Post: 2014-12-11, 17:02

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •