Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: How to install Wifite-mod-pixiewps and reaver-wps-fork-t6x to nethunter

  1. #11
    Junior Member
    Join Date
    Aug 2015
    Posts
    1
    try this:
    airmon-ng start wlan1
    wifite-ng
    and it goes automatically to monitor interface you just put up via airmon

  2. #12
    Junior Member
    Join Date
    Jun 2015
    Location
    Wales
    Posts
    7
    yeah that works

  3. #13
    Senior Member
    Join Date
    Mar 2014
    Posts
    158
    Only now i got time to deal with this question about using pixie wps in raspberry .
    It is possible but i had some work to do :
    Here they are all the steps i took to put it working on this log : Pastebin

    SSH Log

    I used an ssh connection to my raspberry to do the work on this .
    Watch the log .
    Last edited by pedropt; 2015-08-17 at 09:15 AM.

  4. #14
    Junior Member
    Join Date
    Aug 2015
    Posts
    1
    Code:
    root@localhost:~/backup#  sudo apt-get install libpcap-dev aircrack-ng sqlite3 libsqlite3-dev libssl-dev -y
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    E: Unable to locate package libpcap-dev
    E: Unable to locate package libsqlite3-dev
    I'm using Kali version 1.10a I think

    It worked when I ran it from LIVE option, but when I actually install (dual boot) it gives me the error above.

    Thanks (sorry if I wasn't detailed enough.)

  5. #15
    Senior Member
    Join Date
    Mar 2014
    Posts
    158
    That error you have should be post in another thread .
    Anyway , check your kali sources in /etc/apt/sources.list
    add these repositories to that file :
    ## Regular repositories
    deb http://http.kali.org/kali kali main non-free contrib
    deb http://security.kali.org/kali-security kali/updates main contrib non-free
    ## Source repositories
    deb-src http://http.kali.org/kali kali main non-free contrib
    deb-src http://security.kali.org/kali-security kali/updates main contrib non-free
    after editing the file and adding the sources from kali website , do an :
    apt-get clean
    apt-get update && apt-get upgrade -y
    In case you want to update to Kali 2.0 then use only these next lines :
    deb http://http.kali.org/kali sana main non-free contrib
    deb http://security.kali.org/kali-security sana/updates main contrib non-free
    deb-src http://http.kali.org/kali sana main non-free contrib
    deb-src http://security.kali.org/kali-security sana/updates main contrib non-free
    Last edited by pedropt; 2015-08-17 at 09:33 PM.

  6. #16
    Junior Member
    Join Date
    Aug 2015
    Posts
    1
    To get this working With my pi and rtl 8187

    airmon-ng start wlan0

    ifconfig wlan0mon down
    iwconfig wlan0mon mode monitor
    ifconfig wlan0mon up

  7. #17
    Member
    Join Date
    Jun 2015
    Posts
    48
    Quote Originally Posted by Scruffyhead View Post
    To get this working With my pi and rtl 8187

    airmon-ng start wlan0

    ifconfig wlan0mon down
    iwconfig wlan0mon mode monitor
    ifconfig wlan0mon up
    try:
    airmon-ng check kill
    airmon-ng start wlan0

    should bring up wlan0mon as needed

    then
    airmon-ng stop wlan0mon
    service network-manager start

    to go back to normal

  8. #18
    Junior Member
    Join Date
    Sep 2015
    Posts
    2
    Hello Pedropt,

    when I run into the line in red below, after it downloaded a lot of things from kali then it said that I don't have enough space.

    Could you please tell me how can I solve this? I run Kali v1.1.0 Live from my USB.

    Can I just ignore that line and run the rest?

    mkdir backup
    cd backup
    git clone https://github.com/derv82/wifite.git
    git clone https://github.com/aanarchyy/wifite-mod-pixiewps.git
    git clone https://github.com/t6x/reaver-wps-fork-t6x.git
    git clone https://github.com/wiire/pixiewps.git
    apt-get update && apt-get upgrade -y && apt-get dist-upgrade -y
    sudo apt-get install libpcap-dev aircrack-ng sqlite3 libsqlite3-dev libssl-dev -y
    cd pixiewps/src/
    make && make install
    cd /root/backup/reaver-wps-fork-t6x/src/
    ./configure
    make && make install
    cp /root/backup/wifite/wifite.py /usr/bin/wifite
    chmod +x /usr/bin/wifite
    cp /root/backup/wifite-mod-pixiewps/wifite-ng /usr/bin/wifite-ng
    chmod +x /usr/bin/wifite-ng

  9. #19
    Senior Member
    Join Date
    Mar 2014
    Posts
    158
    the only way to solve it is to buy a new usb device with more space .
    If it says that there is no more space , then probably is right .

  10. #20
    Senior Member
    Join Date
    Mar 2014
    Posts
    158
    Kali uses an image with 3G that when is recorded in SD card goes to 5-6 Gig after first time system start, how much is the size of your SD card ?
    If you have a big SD card (like 8G or more) and you just installed kali , then you probably have to increase your filesystem partition .

    If that is the case then follow this next link :
    http://elinux.org/RPi_Resize_Flash_Partitions

    A tip , do the resize process with your SD card in a card reader connected to other linux computer , or your will have big problems to get the job done , if you have lucky .
    Use Gparted in the linux machine where you will do the operation to SD card .


    Note :
    Old kali repositories are not avaliable anymore , so it will give a 404 error .
    If you still want to stick in 1.1.0a version you have to change in your sources.list the links .
    to do that follow these steps :

    on terminal :
    nano /etc/apt/sources.list
    delete every repository you may have related to kali , and write this one :
    deb http://old.kali.org/kali moto main non-free contrib
    press keys "ctrl + o" to save , then press "enter" , and then press "ctrl + x" to close .
    then you can do "apt-get update && apt-get upgrade -y"

    Note : To release space from your USB pen write this on console :
    apt-get clean
    and you will release +- 1G of space temporarily to finish the installation , however , if you have a small capacity card , then you should buy a new card with more space (depending on your use in kali .
    Last edited by pedropt; 2015-12-03 at 11:19 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •