Results 1 to 2 of 2

Thread: Installing drivers Intel-Nvidia Error.

  1. #1
    Join Date

    Installing drivers Intel-Nvidia Error.

    As the topic. After installing the drivers receives a mistake
    2015-08-23 10.30.55.jpg

    below, not the complete log because it is too long

    nvidia-installer log file '/var/log/nvidia-installer.log'
    creation time: Sun Aug 23 10:26:07 2015
    installer version: 352.30

    PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

    nvidia-installer command line:

    Using: nvidia-installer ncurses user interface
    -> Detected 8 CPUs online; setting concurrency level to 8.
    -> License accepted.
    -> Installing NVIDIA driver version 352.30.
    -> Would you like to register the kernel module sources with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later. (Answer: No)
    -> Performing CC sanity check with CC="/usr/bin/cc".
    -> Kernel source path: '/lib/modules/4.0.0-kali1-amd64/source'
    -> Kernel output path: '/lib/modules/4.0.0-kali1-amd64/build'
    -> Performing rivafb check.
    -> Performing nvidiafb check.
    -> Performing Xen check.
    -> Performing PREEMPT_RT check.
    -> Cleaning kernel module build directory.
    executing: 'cd ./kernel; /usr/bin/make clean'...
    -> Building NVIDIA kernel module:
    executing: 'cd ./kernel; /usr/bin/make module SYSSRC=/lib/modules/4.0.0-kali1-amd64/source SYSOUT=/lib/modules/4.0.0-kali1-amd64/build -j8 NV_BUILD_MODULE_INSTANCES='...
    NVIDIA: calling KBUILD...
    make[1]: Wejście do katalogu '/usr/src/linux-headers-4.0.0-kali1-common'
    /usr/bin/make -C /lib/modules/4.0.0-kali1-amd64/build KBUILD_SRC=/usr/src/linux-headers-4.0.0-kali1-common \
    -f /usr/src/linux-headers-4.0.0-kali1-common/Makefile modules
    make[2]: Wejście do katalogu '/usr/src/linux-headers-4.0.0-kali1-amd64'
    test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
    echo >&2; \
    echo >&2 " ERROR: Kernel configuration is invalid."; \
    echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\
    echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
    echo >&2 ; \
    mkdir -p /tmp/selfgz1291/NVIDIA-Linux-x86_64-352.30/kernel/.tmp_versions ; rm -f /tmp/selfgz1291/NVIDIA-Linux-x86_64-352.30/kernel/.tmp_versions/*
    /usr/bin/make -f /usr/src/linux-headers-4.0.0-kali1-common/scripts/ obj=/tmp/selfgz1291/NVIDIA-Linux-x86_64-352.30/kernel
    cc -Wp,-MD,/tmp/selfgz1291/NVIDIA-Linux-x86_64-352.30/kernel/.nv-frontend.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.9/include -I/usr/src/linux-headers-4.0.0-kali1-common/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/usr/src/linux-headers-4.0.0-kali1-common/include -Iinclude -I/usr/src/linux-headers-4.0.0-kali1-common/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-headers-4.0.0-kali1-common/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-headers-4.0.0-kali1-common/include/linux/kconfig.h -I/tmp/selfgz1291/NVIDIA-Linux-x86_64-352.30/kernel -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m64 -mno-80387 -mno-fp-ret-in-387 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_S
    -> Skipping installation of the libvdpau wrapper library.
    -> Searching for conflicting files:
    -> done.
    -> Installing 'NVIDIA Accelerated Graphics Driver for Linux-x86_64' (352.30):
    executing: '/sbin/ldconfig'...
    executing: '/sbin/depmod -aq '...
    -> done.
    -> Driver file installation is complete.
    -> Running post-install sanity check:
    -> done.
    -> Post-install sanity check passed.
    -> Running runtime sanity check:
    -> done.
    -> Runtime sanity check passed.
    -> Would you like to run the nvidia-xconfig utility to automatically update your X configuration file so that the NVIDIA X driver will be used when you restart X? Any pre-existing X configuration file will be backed up. (Answer: No)
    -> Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86_64 (version: 352.30) is now complete. Please update your XF86Config or xorg.conf file as appropriate; see the file /usr/share/doc/NVIDIA_GLX-1.0/README.txt for details.
    # Configuration file for Bumblebee. Values should **not** be put between quotes

    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    # The secondary Xorg server DISPLAY number
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    # The name of the Bumbleblee server group name (GID name)
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    # Directory with a dummy config file to pass as a -configdir to secondary X

    ## Client options. Will take effect on the next optirun executed.
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    # List of paths which are searched for the primus when using
    # the primus bridge
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?

    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely

    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    # Module name to load, defaults to Driver if empty or unset
    # colon-separated path to the nvidia libraries
    # comma-separated path of the directory containing and the
    # default Xorg modules path

    ## Section with nouveau driver specific options, only parsed if Driver=nouveau

    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"

    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:01:00.0"

    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    # BusID "PCI:01:00:0"

    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    Any suggestions
    Last edited by snofi; 2015-08-23 at 10:55.

  2. #2
    Join Date
    Ive got the same problem, I installed a fresh copy of Kali 2.0 and followed the instructions

    Upon reboot I got the system cant recover error

    Asus K53SV Laptop
    Nvidia 540m

Similar Threads

  1. Replies: 1
    Last Post: 2016-09-24, 07:25
  2. Installing problem with Nvidia / Intel drivers.
    By koapsi in forum Installing Archive
    Replies: 0
    Last Post: 2016-08-21, 21:58
  3. Replies: 2
    Last Post: 2015-08-08, 09:13
  4. Error installing Nvidia Drivers
    By kali14 in forum General Archive
    Replies: 0
    Last Post: 2015-03-01, 12:27
  5. Error installing NVIDIA graphics card drivers on a Kali Linux
    By Roham Soroush in forum General Archive
    Replies: 1
    Last Post: 2014-01-13, 14:41

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts