Tried Everything -Kali Wireless

[kali50]

I have kali installed, dual boot with windows. (/ /home /boot)

Now I am fairly new to getting drivers installed, and compiling things in linux. I didnt have issues like this on my older pc's with backtrack installed. My main problem recently is getting wireless to work.
I know there are many questions like this, but I feel I have tried everything and I am confused and have no clue what my solution is. (besides buying a new linux/kali wireless card). The funny thing is it's very simple in what I am trying to do, but upon entering the first terminal commands I get error messages which screw up the whole driver installation.

So I will try my best to explain.

I have a qualcom atheros qca61x4 wireless adapter built in my laptop.
So my first solution was to install the new driver via backports with following this-----

"Get the latest backport from https://www.kernel.org/pub/linux/ker...ts/2015/07/31/ (the zip/tar file)
Uncompress somewhere
Patch the code with https://github.com/atondwal/linux/co...d67d2a04392466
Then do:
make defconfig-ath10k
make
sudo make install

Then, get the latest firmware from https://github.com/kvalo/ath10k-firm...ive/master.zip
Unzip and copy ath10k folder to /lib/firmware/ath10k
Copy these two files (overwrite what you got before) in /lib/firmware/ath10k/QCA6164/hw2.1:
https://github.com/atondwal/ath10k-f.../QCA6164/hw2.1

Create a file named /etc/modprobe.d/ath10k.conf with the following line:

"options ath10k_core skip_otp=y"

Reboot and modprobe ath10k_pci. Do "lshw -C network"; "ip link show" or "rfkill list" to see if you got your card working."


Fairly straight forward...

But when I enter "make" after doing "make defconfig-ath10k" I get error messages --

"/usr/src/linux-headers-4.0.0-kali1-common/scripts/Makefile.build:408: receipe for target '/root/Documents/backports-20150731/drivers/net/wireless failed"

and then says lots of errors like --
"make[3]: ***[modules] Error 2
Makefile:40: receipt for target 'modules' failed"

So that is happening so I moved onto another tutorial. Which follows installing Ndiswrapper to install a windows driver.

So I place latest ndiswrapper extract in /usr/src and open a terminal in the ndiswrapper folder.

Upon entering the Command "make" I then get similar errors as I got from the above when entering "make"
"make files receipt for target failed"


So it seems I cant "make" anything.
I have installed the correct linux headers and build essentials done all apt gets, updates, and upgrades (i think)

I mean I am just not sure whats going on. I cant even install ndisgtk because I need ndiswrapper installed and I cant. I enter modprobe for ndiswrapper and it says it cant be found.

So because of this I failed to even get the wireless driver installed, is there anything I could try or do?

I have reinstalled kali linux 3x now thinking it was because of wrong linux headers or something, but I have nothing left to try out. I feel like this is so simple to figure out.

Couple things, when entering "lspci" it recognized the wireless card but no driver. When entering iwconfig just says etho and lo - no wireless extensions.

Where to begin?

[duxim]

I don't know is this problem related to drivers or Kali itself.
Only what I can advise you is to try once again to reinstall Kali Linux.
This time download new iso img. Try with Light version of Kali Linux.
First time when you boot to Kali just check if you have wireless.
If you don't have wireless. Restart and set BIOS to their default setting.
If you don't have wireless after that you can assume that problem is in driver.
Try to install it.
hope that you fix this problem

and read this post could be helpful
https://forums.kali.org/showthread.p...-Kali-2-0-Sana

[kali50]

I don't know is this problem related to drivers or Kali itself.
Only what I can advise you is to try once again to reinstall Kali Linux.
This time download new iso img. Try with Light version of Kali Linux.
First time when you boot to Kali just check if you have wireless.
If you don't have wireless. Restart and set BIOS to their default setting.
If you don't have wireless after that you can assume that problem is in driver.
Try to install it.
hope that you fix this problem

and read this post could be helpful
https://forums.kali.org/showthread.p...-Kali-2-0-Sana

Thanks for the link duxim

Tried the light version still nothing

Now I fixed the "make" problem. I can compile things now. The problem was the "patch" had bad coding in it. So didn't try compiling with the patch and it compiled, though it didn't fix the problem with the wireless adapter, even after completing the steps correctly.

Also found the driver files for my built in adapter and tried installing it with ndiswrapper and it came up with errors. (I am typing from another computer so it would take along time to type the whole lines, but can get it)


Not to sure what the problem is either, I am running windows 7, bios running off legacy. It does have uefi but I switched to legacy to run w7. Don't think it would effect it but not sure. Didn't touch anything else with the bios. And I ran the command to check if the adapter was blocked and it said no.

Also tried a wifi usb I found laying around just now and installing the drivers (windowsxp)via ndiswrapper command and had errors installing it. Also tried installing it from the GUI and had error saying to check if ndiswrapper is installed. Funny because it is

[duxim]

Not to sure what the problem is either, I am running windows 7, bios running off legacy. It does have uefi but I switched to legacy to run w7. Don't think it would effect it but not sure. Didn't touch anything else with the bios. And I ran the command to check if the adapter was blocked and it said no.

I didn't understand did you bring up bios to their default setting as I recommended in first post.
just do it. you will not messed up anything.

[kali50]

I did default the bios - no change

I was not able to boot windows after doing so (just hangs at bios logo), however I was able to boot kali 2 light with USB. Upon booting with USB live, still no wireless by default

[duxim]

i am very sorry to hear that. What type of BIOS you use?
This error that you could not boot into Windows should not happened.
This is something I can not understand in this moment. It doesn't make any sense to me.
First in this moment try to repair Windows boot.

Try first with this command from Kali
update-grub
and look if it show Windows entry. Try to boot into Windows
If it is not helpful then try with one of this tools in this order
http://sourceforge.net/projects/boot-repair-cd/
make boot usb and try to fix it. In this case you will need internet connection
or Hiren's Boot cd

http://www.hirensbootcd.org/download/
or Bootmed
http://www.bootmed.com/download-boot...-download-com/

P.S. probably you have problems with wifi drivers in Kali

[kali50]

i am very sorry to hear that. What type of BIOS you use?
This error that you could not boot into Windows should not happened.
This is something I can not understand in this moment. It doesn't make any sense to me.
First in this moment try to repair Windows boot.

Try first with this command from Kali
update-grub
and look if it show Windows entry. Try to boot into Windows
If it is not helpful then try with one of this tools in this order
http://sourceforge.net/projects/boot-repair-cd/
make boot usb and try to fix it. In this case you will need internet connection
or Hiren's Boot cd

http://www.hirensbootcd.org/download/
or Bootmed
http://www.bootmed.com/download-boot...-download-com/

P.S. probably you have problems with wifi drivers in Kali

Haha no worries about windows, just had to switch back to legacysupport in bios for first boot to get it back and boot correctly. My laptop camewith windows 8 installed, to install Windows7 had toconvert the hdd to gpt to install a mbr (of I remember correctly)

Bios version A2CN34ww(Ve.02)
was reading that if iupdate mybios for my model it can cause hardware issues for lots of people. Haven't updated but might try that.

It's almost for sure a driver issue I think as well, but surpised can't get my USB one to work either

[oba]

I also have similar issues but my driver's for the wireless is up and working but can't just see or connect to any network
any assistance is appreciated

[Vlado]

I didn't understand did you bring up bios to their default setting as I recommended in first post.
just do it. you will not messed up anything.

I would be carefull whit that, after i reseted my BIOS, it couldn't see any of my Hard drives or DVD drive.and i couldn't boot into any OS.
I needed to open my laptop to put the BIOS Battery out !
After that everythink worked again.

[Vlado]

I also have similar issues but my driver's for the wireless is up and working but can't just see or connect to any network
any assistance is appreciated

I had the same Problem.
Maybe this sounds stupid but Switch your Computer/laptop into Sleep mode / hibernate mode ! ( on my ASUS its "FN" + "F1")
After "waking" up my laptop, he finally could find / search / connect to Networks.

I hope this help you

[duxim]

I would be carefull whit that, after i reseted my BIOS, it couldn't see any of my Hard drives or DVD drive.and i couldn't boot into any OS.
I needed to open my laptop to put the BIOS Battery out !
After that everythink worked again.

This is not problem with BIOS. this is problem with your hardware configuration, and I just recommended to set BIOS to their default settings.
it could not make any problems with boot, except in special cases but this something you can solve in few steps.

[Vlado]

This is not problem with BIOS. this is problem with your hardware configuration, and I just recommended to set BIOS to their default settings.
it could not make any problems with boot, except in special cases but this something you can solve in few steps.

Jes, but i think i am not the only one whit an Usual Asus Laptop.
Many people had this problems whit laptops after changing to Default settings. so better they know a Solution (like putting BIOS battery out )

Ziveli

[duxim]

@vlado
you are correct. every solution is better then none.
živeli

[60d]

BIOS:
Config > Power >
Look for power management of the card

Security > I/O Port Access:
Wireless LAN [Enabled]?
Wireless WAN [Enabled]?


What errors are you getting on:
iwconfig ?
ifconfig ?
dmesg | tail ?

Does you'r wifi card works on live OS? Other OS maybe?
Did you try to fire up wifite?

[60d]

http://docs.kali.org/installation/tr...-driver-issues

[kali50]

BIOS:
Config > Power >
Look for power management of the card

Security > I/O Port Access:
Wireless LAN [Enabled]?
Wireless WAN [Enabled]?


What errors are you getting on:
iwconfig ?
ifconfig ?
dmesg | tail ?

Does you'r wifi card works on live OS? Other OS maybe?
Did you try to fire up wifite?

In bios, those both say enabled.

For the errors:
iwconfig says no wireless extensions for etho and lo
ifconfig just shows information about the ethernet adapter and lo (loopback)
dmesg tail says ---

"

dmesg | tail
[ 20.427381] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.427388] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.427394] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.427401] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 20.427408] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 20.427414] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 20.427419] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.427424] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 20.671977] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 20.683622] r8169 0000:02:00.0 eth0: link down

"

Yes, wifi works on windows, which is dualbooted.
/wifite wont work because no network adapter setup

[fruchttiger00x0]

Hmm, could you please run and show us the output?

lspci -k

&

lsusb ; lsusb -t

[kali50]

Hmm, could you please run and show us the output?

lspci -k

&

lsusb ; lsusb -t

Sure, it is below . lspci -k see the adapter but not the driver. As it should say Kernel driver in use: XXX but only shows "subsystem"

lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
Subsystem: Lenovo Device 3801
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
Subsystem: Lenovo Device 3801
Kernel driver in use: radeon
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
Subsystem: Lenovo Device 3801
Kernel driver in use: snd_hda_intel
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
Kernel driver in use: pcieport
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
Kernel driver in use: pcieport
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1537
Subsystem: Lenovo Device 3801
Kernel driver in use: AMD Cryptographic Coprocessor
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 11)
Subsystem: Lenovo Device 3801
Kernel driver in use: xhci_hcd
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
Subsystem: Lenovo Device 3801
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
Subsystem: Lenovo Device 3801
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
Subsystem: Lenovo Device 3801
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 42)
Subsystem: Lenovo Device 3801
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
Subsystem: Lenovo Device 3801
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Lenovo Device 3801
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
Subsystem: Lenovo Device 3801
Kernel driver in use: sdhci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1580
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1581
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1582
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1583
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1584
Kernel driver in use: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1585
01:00.0 Network controller: Qualcomm Atheros Device 0041 (rev 20)
Subsystem: Lenovo Device 3545
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
Subsystem: Lenovo Device 3812
Kernel driver in use: r8169

l---
and the lsusb

Bus 002 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
Bus 002 Device 003: ID 5986:014f Acer, Inc
Bus 002 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 2: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 3: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M

[Gerard9]

When you installed Kali Linux, did you have an Ethernet cable plugged into your laptop? The first time I installed Kali I did not have Ethernet cable plugged in and had all sorts of errors trying to get my wifi up. I reinstalled with Ethernet cable plugged in, and everything worked perfectly.

[mmusket33]

All MTeams computers are dual boot XP/Linux. To allow linux to access wifi devices in two(2) of these computers we must turn on the Internal wifi device with windows first. Once the Internal wifi device is functioning we can reboot into Linux and. as long as we do not switch the power button off, the wifi devices work for both Operating Systems.

MTeams