kali 2 on rpi2 error with alpha antna

[matan]

hello

i tried to use in aircrack tools

and i found some errors using the new version of kali

u can see that under PHY the script write null

root@kali:~# airmon-ng start wlan1
Found 1 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

  PID Name
  729 wpa_supplicant

PHY     Interface       Driver          Chipset

null    wlan1           rtl8192cu       Realtek Semiconductor Corp. RTL8188RU 802.11n WLAN Adapter

wlan1     Link encap:Ethernet  HWaddr 00:c0:ca:61:13:74
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:1 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@kali:~# lsusb
Bus 001 Device 007: ID 0bda:817f Realtek Semiconductor Corp. RTL8188RU 802.11n WLAN Adapter
Bus 001 Device 005: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard
Bus 001 Device 004: ID 15d9:0a4f Trust International B.V. Optical Mouse
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@kali:~# lsmod
Module                  Size  Used by
8192cu                522055  0
arc4                    1764  0
rt2800usb              17602  0
rt2800lib              72113  1 rt2800usb
rt2x00usb               8525  1 rt2800usb
rt2x00lib              36667  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              477501  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              384120  2 mac80211,rt2x00lib
crc_ccitt               1153  1 rt2800lib
rfkill                 16205  2 cfg80211
snd_soc_pcm512x_i2c     1693  0
snd_soc_tas5713         4968  0
snd_soc_wm8804          7300  0
snd_soc_pcm512x         6356  1 snd_soc_pcm512x_i2c
regmap_spi              1702  1 snd_soc_wm8804
regmap_i2c              2281  3 snd_soc_wm8804,snd_soc_pcm512x_i2c,snd_soc_tas5713
snd_soc_bcm2708_i2s     6444  0
regmap_mmio             2965  1 snd_soc_bcm2708_i2s
snd_soc_core          135973  4 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_tas5713,snd_soc_bcm2708_i2s
snd_compress            7507  1 snd_soc_core
snd_pcm_dmaengine       3343  1 snd_soc_core
snd_pcm                72539  3 snd_soc_wm8804,snd_soc_core,snd_pcm_dmaengine
snd_timer              17586  1 snd_pcm
snd                    50582  4 snd_soc_core,snd_timer,snd_pcm,snd_compress
evdev                   9802  2
spi_bcm2708             5133  0
i2c_bcm2708             4936  0
fuse                   81207  1
ipv6                  330717  18

[steev]

The 8192cu driver isn't particularly good. You want to use something better (card, the driver still sucks) - but I am planning to release an image soon (tm) with a 4.0 kernel and that *may* help some, but that driver has sucked for a very long time, and I'm not entirely sure they've fully moved to mac80211 yet in 4.0.

[mikrostart]

I have Edimax EW-7811Un with RTL8188CUS working under rtl8192cu driver - perfect wiht Kali, Ubuntu, OSMC, Raspbian, PiCore.
For injection my top recomendation is RT3070. Although 20dBm, doesn't overheat, fast and well supported under any OS.

[matan]

thank you for your fast response !!!

i tried with under alfa adapter and something strange happen

root@kali:~# ifconfig


lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan3     Link encap:Ethernet  HWaddr 78:d3:8d:a7:12:01
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@kali:~# airmon-ng start wlan3
Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

  PID Name
  297 dhclient
  364 NetworkManager
  490 wpa_supplicant

PHY     Interface       Driver          Chipset

phy0    wlan3           rt2800usb       Ralink Technology, Corp. RT3072
                (mac80211 monitor mode vif enabled for [phy0]wlan3 on [phy0]wlan3mon)
                (mac80211 station mode vif disabled for [phy0]wlan3)

root@kali:~# ifconfig


lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan3mon  Link encap:Ethernet  HWaddr 78:d3:8d:a7:12:01
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[steev]

I'm lost as to what you're saying is strange - different devices use different drivers - just because they are the same *brand* doesn't mean they use the same chips - you need to carefully look at what you're buying.

[matan]

the problem is that it didn't create under "mon" nic but change the original interface from wlan3 to wlan3mon

[steev]

That change was documented https://www.kali.org/penetration-tes...ck-ng-updates/ - it's not weird (okay maybe a little weird), but it's not a bug or error, it's expected behavior.

[mikrostart]

Yep, I can confirm.
We already discuss that with steev.
Also with my Kali distro, it is need to "ifconfig wlanXmon down" the interface, and then put it manualy in minitor mode. Then ifconfig wlanXmon up, and you're good to go.

p.s. haven't tried the airmon-zc yet, but soon.