Hi, i tried to capture traffic using kali 2 and kali 1 with TP-Link TL-WN7200ND and this adapter is not working on my notebook. Originally i used kali virtualbox image and then i tried to boot from a usb flash with kali live installed on it, even then it didn't work. On a different notebook the adapter can enter monitor mode and see wifi networks but injection is not working, i also tried to boot kali live using a PC and here the adapter works - monitor+injection is working, i can see wifi networks. Also i tested wn721n adapter with my notebook and it's working in monitor+injection modes. So the problem is definitely with rt2800usb drivers i think because wn721n is working and WN7200ND is not working. Here is the info needed:
Code:root@kali:~# airmon-ng --verbose No LSB modules are available. Distributor ID: Kali Description: Kali GNU/Linux 2.0 Release: 2.0 Codename: sana Linux kali 4.0.0-kali1-amd64 #1 SMP Debian 4.0.4-1+kali2 (2015-06-03) x86_64 GNU/Linux Detected VM using dmi_info This appears to be a VirtualBox Virtual Machine If your system supports VT-d, it may be possible to use PCI devices If your system does not support VT-d, you can only use USB wifi cards K indicates driver is from 4.0.0-kali1-amd64 V indicates driver comes directly from the vendor, almost certainly a bad thing S indicates driver comes from the staging tree, these drivers are meant for reference not actual use, BEWARE ? indicates we do not know where the driver comes from... report this X[PHY]Interface Driver[Stack]-FirmwareRev Chipset Extended Info C[phy0]wlan1 rt2800usb[mac80211]-0.29 Ralink Technology, Corp. RT2870/RT3070Code:root@kali:~# lsusb Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubCode:root@kali:~# lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter 00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) 00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service 00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08) 00:0b.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller 00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)Code:root@kali:~# lsmod Module Size Used by arc4 16384 2 nfnetlink_queue 24576 0 nfnetlink_log 20480 0 nfnetlink 16384 2 nfnetlink_log,nfnetlink_queue binfmt_misc 20480 1 bluetooth 425984 0 vboxsf 45056 1 joydev 20480 0 ppdev 20480 0 parport_pc 28672 0 evdev 24576 11 parport 36864 2 ppdev,parport_pc vboxvideo 16384 1 snd_intel8x0 36864 4 psmouse 110592 0 serio_raw 16384 0 snd_ac97_codec 118784 1 snd_intel8x0 pcspkr 16384 0 drm 274432 3 vboxvideo i2c_piix4 24576 0 snd_pcm 90112 2 snd_ac97_codec,snd_intel8x0 snd_timer 28672 1 snd_pcm acpi_cpufreq 20480 0 snd 69632 12 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm soundcore 16384 1 snd vboxguest 229376 7 vboxsf video 20480 0 ac 16384 0 battery 16384 0 8250_fintek 16384 0 ac97_bus 16384 1 snd_ac97_codec processor 28672 1 acpi_cpufreq button 16384 0 rt2800usb 28672 0 rt2x00usb 20480 1 rt2800usb rt2800lib 86016 1 rt2800usb thermal_sys 32768 2 video,processor rt2x00lib 49152 3 rt2x00usb,rt2800lib,rt2800usb mac80211 573440 3 rt2x00lib,rt2x00usb,rt2800lib cfg80211 462848 2 mac80211,rt2x00lib compat 20480 3 cfg80211,mac80211,rt2800usb crc_ccitt 16384 1 rt2800lib rfkill 20480 4 cfg80211,bluetooth fuse 90112 3 autofs4 36864 2 ext4 499712 1 crc16 16384 2 ext4,bluetooth mbcache 20480 1 ext4 jbd2 86016 1 ext4 dm_mod 94208 0 hid_generic 16384 0 usbhid 49152 0 hid 106496 2 hid_generic,usbhid sg 32768 0 sr_mod 24576 0 cdrom 49152 1 sr_mod sd_mod 45056 3 ata_generic 16384 0 ohci_pci 16384 0 ahci 32768 2 libahci 28672 1 ahci ata_piix 36864 0 ohci_hcd 45056 1 ohci_pci ehci_pci 16384 0 ehci_hcd 77824 1 ehci_pci libata 180224 4 ahci,libahci,ata_generic,ata_piix usbcore 200704 7 rt2x00usb,ohci_hcd,ohci_pci,rt2800usb,ehci_hcd,ehci_pci,usbhid usb_common 16384 1 usbcore e1000 126976 0 scsi_mod 200704 4 sg,libata,sd_mod,sr_modCode:root@kali:~# dmesg [ 128.236183] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 128.851116] usb 1-1: New USB device found, idVendor=148f, idProduct=3070 [ 128.851125] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 128.851131] usb 1-1: Product: 802.11 n WLAN [ 128.851138] usb 1-1: Manufacturer: Ralink [ 128.851145] usb 1-1: SerialNumber: 1.0 [ 129.384134] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 130.188290] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 130.745163] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 130.818536] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 132.042637] rt2800usb 1-1:1.0 wlan1: renamed from wlan0 [ 132.067454] systemd-udevd[1374]: renamed network interface wlan0 to wlan1 [ 132.162307] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 132.178902] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin [ 132.178939] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29Code:root@kali:~# rfkill unblock wifi; rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: noCode:root@kali:~# iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:offCode:root@kali:~# airmon-ng PHY Interface Driver Chipset phy0 wlan1 rt2800usb Ralink Technology, Corp. RT2870/RT3070Code:root@kali:~# lsb_release -a; uname -a No LSB modules are available. Distributor ID: Kali Description: Kali GNU/Linux 2.0 Release: 2.0 Codename: sana Linux kali 4.0.0-kali1-amd64 #1 SMP Debian 4.0.4-1+kali2 (2015-06-03) x86_64 GNU/LinuxCode:root@kali:~# lshw -C network *-network description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:bf:ed:99 size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full ip=10.0.2.15 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) *-usb description: Wireless interface product: 802.11 n WLAN vendor: Ralink physical id: 1 bus info: usb@1:1 logical name: wlan1 version: 1.01 serial: 1.0 capabilities: usb-2.00 ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=4.0.0-kali1-amd64 firmware=0.29 link=no maxpower=450mA multicast=yes speed=480Mbit/s wireless=IEEE 802.11bgn
Originally Posted by kali2015
