Results 1 to 5 of 5

Thread: Error installinng AMD Catalyst 15.9 drivers

  1. #1
    Join Date
    2015-Nov
    Posts
    2

    Error installinng AMD Catalyst 15.9 drivers

    Hy guys I'm using kali 2.0 on HDD
    I'm trying to install amd catalyst 15.9 drivers but there is an error....the log file says that:

    "Supported adapter detected.
    Check if system has the tools required for installation.
    Uninstalling any previously installed drivers.

    Creating symlink /var/lib/dkms/fglrx/15.201.1151/source ->
    /usr/src/fglrx-15.201.1151

    DKMS: add completed.

    Kernel preparation unnecessary for this kernel. Skipping...

    Building module:
    cleaning build area....
    cd /var/lib/dkms/fglrx/15.201.1151/build; sh make.sh --nohints --uname_r=4.0.0-kali1-amd64 --norootcheck....(bad exit status: 1)
    [Error] Kernel Module : Failed to build fglrx-15.201.1151 with DKMS
    [Error] Kernel Module : Removing fglrx-15.201.1151 from DKMS

    ------------------------------
    Deleting module version: 15.201.1151
    completely from the DKMS tree.
    ------------------------------
    Done.
    [Reboot] Kernel Module : update-initramfs"

    I used this guide to install AMD Catalyst 15.7 :
    http://unix.stackexchange.com/questi...-kali-2-0-sana
    and all went ok but I need the 15.9 drivers to run oclHashcat .
    Can someone please help me?

  2. #2
    Join Date
    2015-Oct
    Location
    /dev/random
    Posts
    22
    Well there is good news and bad news:

    The Bad news Catalyst 15.9 driver requires Xorg up to 1.17 linux kernel (2.6 to 3.19) so its never going to compile
    on Kali2, which uses kernel 4.0.0 and Xorg1.17.2 without patching.

    The good news is that the link you followed for catalyst 15.7 should work:
    From the oclHashcat page:


    GPU Driver requirements:

    NV users require ForceWare 346.59 or later
    AMD users require Catalyst 14.9 or later

    So should work ok with Catalyst 15.7

  3. #3
    Join Date
    2015-Nov
    Posts
    2
    thank you for the answer.
    I'll try to make oclhashcat work with 15.7

  4. #4
    Join Date
    2015-Oct
    Location
    /dev/random
    Posts
    22
    Good find BTW, I'm running the 64bit oclHashcat benchmark on Ubuntu 14.10 with an AMD HD5770
    card and catalyst 15.2 drivers. The GPU core is running at 850MHz and Memory 1G DDR5 set at
    1200MHz
    Benchmark has been running 10 minutes during which time there were loud bursts of activity from
    the GPU fan and after about 20 minutes the whole desktop locked up, could not restart Xserver or
    break into alternate console and had to restart, my first lockup in over 10 years.
    I ran benchmark again but after 5 minutes quit with ctrl+c
    Here are some of my stats:


    oclHashcat64.bin -b
    oclHashcat v1.37 starting in benchmark-mode...

    Device #1: Juniper, 512MB, 850Mhz, 10MCU

    Hashtype: MD4
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 4901.6 MH/s

    Hashtype: MD5
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 2807.9 MH/s

    Hashtype: Half MD5
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 1628.8 MH/s

    Hashtype: SHA1
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 984.4 MH/s

    Hashtype: SHA256
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 349.6 MH/s

    Hashtype: SHA384
    Workload: 256 loops, 256 accel

    Speed.GPU.#1.: 96989.8 kH/s

    Hashtype: SHA512
    Workload: 256 loops, 256 accel

    Speed.GPU.#1.: 98202.2 kH/s

    Hashtype: SHA-3(Keccak)
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 67171.5 kH/s

    Hashtype: SipHash
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 2684.2 MH/s

    Hashtype: RipeMD160
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 581.6 MH/s

    Hashtype: Whirlpool
    Workload: 512 loops, 32 accel

    Speed.GPU.#1.: 32378.1 kH/s
    Last edited by pyth0n; 2015-11-14 at 14:56.

  5. #5
    Join Date
    2015-Nov
    Posts
    1
    Can confirm the instructions at http://unix.stackexchange.com/questi...-kali-2-0-sana worked for me on a Radeon 7970 Vapor-X. Some oclhashcat results:

    rand00m@kali:/usr/share# oclhashcat -b --force
    oclHashcat v1.36 starting in benchmark-mode...

    Device #1: Tahiti, 2812MB, 1050Mhz, 32MCU

    Hashtype: MD4
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 16894.0 MH/s

    Hashtype: MD5
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 8217.8 MH/s

    Hashtype: SHA1
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 3106.5 MH/s

    Hashtype: SHA256
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 1138.6 MH/s

    Hashtype: SHA384
    Workload: 256 loops, 256 accel

    Speed.GPU.#1.: 439.9 MH/s

    Hashtype: SHA512
    Workload: 256 loops, 256 accel

    Speed.GPU.#1.: 440.1 MH/s

    Hashtype: SHA-3(Keccak)
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 196.1 MH/s

    Hashtype: RipeMD160
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 1921.1 MH/s

    Hashtype: Whirlpool
    Workload: 512 loops, 32 accel

    Speed.GPU.#1.: 44775.2 kH/s

    Hashtype: GOST R 34.11-94
    Workload: 512 loops, 64 accel

    Speed.GPU.#1.: 116.2 MH/s

    Hashtype: SAP CODVN B (BCODE)
    Workload: 1024 loops, 64 accel

    Speed.GPU.#1.: 731.7 MH/s

    Hashtype: SAP CODVN F/G (PASSCODE)
    Workload: 512 loops, 32 accel

    Speed.GPU.#1.: 162.1 MH/s

    Hashtype: SAP CODVN H (PWDSALTEDHASH) iSSHA-1
    Workload: 1024 loops, 16 accel

    Speed.GPU.#1.: 1886.4 kH/s

    Hashtype: Lotus Notes/Domino 5
    Workload: 128 loops, 32 accel

    Speed.GPU.#1.: 139.4 MH/s

    Hashtype: Lotus Notes/Domino 6
    Workload: 128 loops, 32 accel

    Speed.GPU.#1.: 24352.2 kH/s

    Hashtype: Lotus Notes/Domino 8
    Workload: 1024 loops, 64 accel

    Speed.GPU.#1.: 240.6 kH/s

    Hashtype: SHA-1(Base64), nsldap, Netscape LDAP SHA
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 3107.6 MH/s

    Hashtype: SSHA-1(Base64), nsldaps, Netscape LDAP SSHA
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 3110.2 MH/s

    Hashtype: descrypt, DES(Unix), Traditional DES
    Workload: 128 loops, 64 accel

    Speed.GPU.#1.: 119.9 MH/s

    Hashtype: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5
    Workload: 1000 loops, 32 accel

    Speed.GPU.#1.: 3636.8 kH/s

    Hashtype: sha256crypt, SHA256(Unix)
    Workload: 1024 loops, 4 accel

    Speed.GPU.#1.: 113.5 kH/s

    Hashtype: sha512crypt, SHA512(Unix)
    Workload: 1024 loops, 8 accel

    Speed.GPU.#1.: 3775 H/s

    Hashtype: bcrypt, Blowfish(OpenBSD)
    Workload: 32 loops, 2 accel

    Speed.GPU.#1.: 4073 H/s

    Hashtype: LM
    Workload: 128 loops, 256 accel

    Speed.GPU.#1.: 1366.6 MH/s

    Hashtype: NTLM
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 16882.7 MH/s

    Hashtype: DCC, mscash
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 4522.1 MH/s

    Hashtype: NetNTLMv1-VANILLA / NetNTLMv1+ESS
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 9446.5 MH/s

    Hashtype: NetNTLMv2
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 615.5 MH/s

    Hashtype: Kerberos 5 AS-REQ Pre-Auth etype 23
    Workload: 128 loops, 32 accel

    Speed.GPU.#1.: 41093.5 kH/s

    Hashtype: EPiServer 6.x < v4
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 2259.0 MH/s

    Hashtype: EPiServer 6.x > v4
    Workload: 512 loops, 256 accel

    Speed.GPU.#1.: 983.5 MH/s

    Hashtype: MSSQL(2000)
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 3095.8 MH/s

    Hashtype: MSSQL(2005)
    Workload: 1024 loops, 256 accel

    Speed.GPU.#1.: 3095.7 MH/s

    Hashtype: MSSQL(2012)
    Workload: 256 loops, 256 accel

    Speed.GPU.#1.: 436.6 MH/s

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •