-
Error installinng AMD Catalyst 15.9 drivers
Hy guys I'm using kali 2.0 on HDD
I'm trying to install amd catalyst 15.9 drivers but there is an error....the log file says that:
"Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Creating symlink /var/lib/dkms/fglrx/15.201.1151/source ->
/usr/src/fglrx-15.201.1151
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
cd /var/lib/dkms/fglrx/15.201.1151/build; sh make.sh --nohints --uname_r=4.0.0-kali1-amd64 --norootcheck....(bad exit status: 1)
[Error] Kernel Module : Failed to build fglrx-15.201.1151 with DKMS
[Error] Kernel Module : Removing fglrx-15.201.1151 from DKMS
------------------------------
Deleting module version: 15.201.1151
completely from the DKMS tree.
------------------------------
Done.
[Reboot] Kernel Module : update-initramfs"
I used this guide to install AMD Catalyst 15.7 :
http://unix.stackexchange.com/questi...-kali-2-0-sana
and all went ok but I need the 15.9 drivers to run oclHashcat .
Can someone please help me?
-
Well there is good news and bad news:
The Bad news Catalyst 15.9 driver requires Xorg up to 1.17 linux kernel (2.6 to 3.19) so its never going to compile
on Kali2, which uses kernel 4.0.0 and Xorg1.17.2 without patching.
The good news is that the link you followed for catalyst 15.7 should work:
From the oclHashcat page:
GPU Driver requirements:
NV users require ForceWare 346.59 or later
AMD users require Catalyst 14.9 or later
So should work ok with Catalyst 15.7
-
thank you for the answer.
I'll try to make oclhashcat work with 15.7
-
Good find BTW, I'm running the 64bit oclHashcat benchmark on Ubuntu 14.10 with an AMD HD5770
card and catalyst 15.2 drivers. The GPU core is running at 850MHz and Memory 1G DDR5 set at
1200MHz
Benchmark has been running 10 minutes during which time there were loud bursts of activity from
the GPU fan and after about 20 minutes the whole desktop locked up, could not restart Xserver or
break into alternate console and had to restart, my first lockup in over 10 years.
I ran benchmark again but after 5 minutes quit with ctrl+c
Here are some of my stats:
oclHashcat64.bin -b
oclHashcat v1.37 starting in benchmark-mode...
Device #1: Juniper, 512MB, 850Mhz, 10MCU
Hashtype: MD4
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 4901.6 MH/s
Hashtype: MD5
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 2807.9 MH/s
Hashtype: Half MD5
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 1628.8 MH/s
Hashtype: SHA1
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 984.4 MH/s
Hashtype: SHA256
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 349.6 MH/s
Hashtype: SHA384
Workload: 256 loops, 256 accel
Speed.GPU.#1.: 96989.8 kH/s
Hashtype: SHA512
Workload: 256 loops, 256 accel
Speed.GPU.#1.: 98202.2 kH/s
Hashtype: SHA-3(Keccak)
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 67171.5 kH/s
Hashtype: SipHash
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 2684.2 MH/s
Hashtype: RipeMD160
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 581.6 MH/s
Hashtype: Whirlpool
Workload: 512 loops, 32 accel
Speed.GPU.#1.: 32378.1 kH/s
Last edited by pyth0n; 2015-11-14 at 14:56.
-
Can confirm the instructions at http://unix.stackexchange.com/questi...-kali-2-0-sana worked for me on a Radeon 7970 Vapor-X. Some oclhashcat results:
rand00m@kali:/usr/share# oclhashcat -b --force
oclHashcat v1.36 starting in benchmark-mode...
Device #1: Tahiti, 2812MB, 1050Mhz, 32MCU
Hashtype: MD4
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 16894.0 MH/s
Hashtype: MD5
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 8217.8 MH/s
Hashtype: SHA1
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 3106.5 MH/s
Hashtype: SHA256
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 1138.6 MH/s
Hashtype: SHA384
Workload: 256 loops, 256 accel
Speed.GPU.#1.: 439.9 MH/s
Hashtype: SHA512
Workload: 256 loops, 256 accel
Speed.GPU.#1.: 440.1 MH/s
Hashtype: SHA-3(Keccak)
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 196.1 MH/s
Hashtype: RipeMD160
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 1921.1 MH/s
Hashtype: Whirlpool
Workload: 512 loops, 32 accel
Speed.GPU.#1.: 44775.2 kH/s
Hashtype: GOST R 34.11-94
Workload: 512 loops, 64 accel
Speed.GPU.#1.: 116.2 MH/s
Hashtype: SAP CODVN B (BCODE)
Workload: 1024 loops, 64 accel
Speed.GPU.#1.: 731.7 MH/s
Hashtype: SAP CODVN F/G (PASSCODE)
Workload: 512 loops, 32 accel
Speed.GPU.#1.: 162.1 MH/s
Hashtype: SAP CODVN H (PWDSALTEDHASH) iSSHA-1
Workload: 1024 loops, 16 accel
Speed.GPU.#1.: 1886.4 kH/s
Hashtype: Lotus Notes/Domino 5
Workload: 128 loops, 32 accel
Speed.GPU.#1.: 139.4 MH/s
Hashtype: Lotus Notes/Domino 6
Workload: 128 loops, 32 accel
Speed.GPU.#1.: 24352.2 kH/s
Hashtype: Lotus Notes/Domino 8
Workload: 1024 loops, 64 accel
Speed.GPU.#1.: 240.6 kH/s
Hashtype: SHA-1(Base64), nsldap, Netscape LDAP SHA
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 3107.6 MH/s
Hashtype: SSHA-1(Base64), nsldaps, Netscape LDAP SSHA
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 3110.2 MH/s
Hashtype: descrypt, DES(Unix), Traditional DES
Workload: 128 loops, 64 accel
Speed.GPU.#1.: 119.9 MH/s
Hashtype: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5
Workload: 1000 loops, 32 accel
Speed.GPU.#1.: 3636.8 kH/s
Hashtype: sha256crypt, SHA256(Unix)
Workload: 1024 loops, 4 accel
Speed.GPU.#1.: 113.5 kH/s
Hashtype: sha512crypt, SHA512(Unix)
Workload: 1024 loops, 8 accel
Speed.GPU.#1.: 3775 H/s
Hashtype: bcrypt, Blowfish(OpenBSD)
Workload: 32 loops, 2 accel
Speed.GPU.#1.: 4073 H/s
Hashtype: LM
Workload: 128 loops, 256 accel
Speed.GPU.#1.: 1366.6 MH/s
Hashtype: NTLM
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 16882.7 MH/s
Hashtype: DCC, mscash
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 4522.1 MH/s
Hashtype: NetNTLMv1-VANILLA / NetNTLMv1+ESS
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 9446.5 MH/s
Hashtype: NetNTLMv2
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 615.5 MH/s
Hashtype: Kerberos 5 AS-REQ Pre-Auth etype 23
Workload: 128 loops, 32 accel
Speed.GPU.#1.: 41093.5 kH/s
Hashtype: EPiServer 6.x < v4
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 2259.0 MH/s
Hashtype: EPiServer 6.x > v4
Workload: 512 loops, 256 accel
Speed.GPU.#1.: 983.5 MH/s
Hashtype: MSSQL(2000)
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 3095.8 MH/s
Hashtype: MSSQL(2005)
Workload: 1024 loops, 256 accel
Speed.GPU.#1.: 3095.7 MH/s
Hashtype: MSSQL(2012)
Workload: 256 loops, 256 accel
Speed.GPU.#1.: 436.6 MH/s
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules