Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: |Tutorial| How to build and install the new NetHunter|Marshmallow 6.0.1|

  1. #11
    Junior Member
    Join Date
    Jan 2016
    Posts
    1
    Would you one mind (hopefully the OP) building an image for hammerhead with this included ?
    https://dev.seemoo.tu-darmstadt.de/bcm/bcm-public
    (This is a mod to enable monitoring mode on the native chipset included with hammerhead)
    I'm not a dev and not even close I'm sorry if this is an inappropriate request
    If it is a apologize and will gladly remove my reply

  2. #12
    Junior Member
    Join Date
    Jan 2016
    Posts
    4
    I'm getting stuck with the below error when cloning the repo of the installer branch: fatal: Remote branch installer-fj not found in upstream origin Any ideas on why the data is not there? Do I need to change the syntax?

  3. #13
    Junior Member
    Join Date
    Jan 2016
    Posts
    3
    @brooksly.com

    It failed for me as well. You can get around it by just downloading the entire kali-nethunter repository instead of the branch.

    ===================================

    My current issue is that the Nexus 7 Razor kernel isn't in the Marshmallow folder and I'm having trouble tracking one down.

  4. #14
    Member
    Join Date
    Nov 2013
    Posts
    30

    Red face Nethunter for OPO Marshmellow

    Quote Originally Posted by xorion33 View Post
    Hi guys.
    Hope you all had a good Christmas , today i have a tutorial for you.
    I will show you how to build the new version of NetHunter and install it to your device(must be a supported device,,see the list below)
    • One Plus One(bacon)

    For my build setup i have Kali Linux installed in vmware, you could use virtualbox also.
    If you have it installed on your pc,,more power to you.
    So the requirements are:
    • Have Kali Linux in a vm or installed on your pc(you could do the same thing on ubuntu,,but for the sake of it i use kali)
    • A rooted supported android device(for marshmallow you should root your device with supersu 2.64 , as of the day i write this tutorial it's the latest)https://drive.google.com/file/d/0B74...ew?usp=sharing <=link to SuperSu here

    Please note: this tutorial will not show you how to install linux neither how to root your android device.
    I tested on a nexus 5 (my phone) and i have the latest marshmallow 6.0.1 on it and device is rooted.
    It's not very complicated, if you ever built android roms or aosp from source it's a lot easier, the Nethunter guys made a script that pretty much
    does it all by itself.

    First thing , we will make a folder to work in, name it the way you want , i will just call it nethunter:
    • mkdir ~/nethunter

    Then change directory into the folder you created:
    • cd ~/nethunter

    Once inside the folder type:
    • Code:
      git clone https://github.com/offensive-security/gcc-arm-linux-gnueabihf-4.7

    After that we are going to clone the repo of the new installer branch like so:
    • Code:
      git clone https://github.com/offensive-security/kali-nethunter.git -b newinstaller-fj

    What we just done will created a folder named AnyKernel2 so we are going to change directory into it:
    • cd ~/nethunter/kali-nethunter/AnyKernel2

    Then we are ready to build:
    • python build.py -d hammerhead -m (the -d means the device you are building for in my case it's a nexus 5 codename hammerhead,,and the -m means
      marshmallow)


    Once it's done,,you will have a zip file into the AnyKernel2 folder, and this is what you are going to flash in recovery to install NetHunter to your device.
    The new installer is using aroma so you will be able to choose what to install.
    On the first page or so you will be asked to install a version of SuperSu older than the one i provided you , untick this boxs, you don't want this to install and replace the version of SuperSu you curently have(2.64 ++)
    When aroma will install it's probable that it will stuck at 40% for a couple of minutes, don't worry, let it do his things,,but if you are stuck there for more than
    lets say 10 minutes just force shudown your device by holding the power button down and reboot,,Kali NetHunter should have been installed correctly anyway.
    Make sure that once you boot with your new KaliNethunter go into the Kali app and update the chroot.

    That's about it, if you have any question feel free to ask i will take a look at the thread everyday.

    **Big thanks to Binkybear and Jmingov who provided me usefull info**
    Thanks. I will wait until there is an official full signed CM13 zip for my rooted encypted OnePlusOne. I built Nethunter for OPO Lollipop on Kali Linux 2.0 following Binkybear's directions.

  5. #15
    Junior Member
    Join Date
    Feb 2016
    Posts
    3

    These directions are missing some info

    Quote Originally Posted by viejo verde View Post
    Thanks. I will wait until there is an official full signed CM13 zip for my rooted encypted OnePlusOne. I built Nethunter for OPO Lollipop on Kali Linux 2.0 following Binkybear's directions.
    Looks like this info is missing some steps, even the one options mentioned on official site :https://github.com/offensive-securit...ding-Nethunter

    did not work for me.

    The folder anykernel2 is missing, even compiling in the other folder "https://github.com/offensive-security/kali-nethunter/tree/master/nethunter-installer" where build.py is located the compiled version build is only 65mb, where as the official downloaded version is around 700mb.

    If any one can provide a complete steps would be great.

    Thanks.

  6. #16
    Member
    Join Date
    Jan 2016
    Location
    on your WiFi, secure it!
    Posts
    30
    x.x

    https://github.com/jcadduono/kali-ne...ller/README.md

    readmeeeeeeeeeeeeeeeeeeeeeees!

    git clone -b master https://github.com/offensive-securit...-nethunter.git
    cd kali-nethunter/nethunter-installer
    ./build.py -d yourdevice --marshmallow --rootfs full --release 3.0.5-or-something

    (it was 65 MB because rootfs was not included, and would have been downloaded by the NetHunter app after flashing -- adding --rootfs full will give you the ~750 MB result)

    sorry for confusing y'all with the new, new, newer, awesome installer :P
    Member of the Kali NetHunter developer team. You can contribute to Kali NetHunter too!
    We accept pull requests!
    Find my GitHub account: jcadduono

  7. #17
    Junior Member
    Join Date
    May 2016
    Posts
    2
    After that we are going to clone the repo of the new installer branch like so:
    [LIST][*]
    Code:
    git clone https://github.com/offensive-security/kali-nethunter.git -b newinstaller-fj
    This is the anwser I've got:
    Cloning into 'kali-nethunter'...
    fatal: Remote branch newinstaller-fj not found in upstream origin

    Any ideas?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •