thanks bro
thanks bro
Hi there!Originally Posted by v1aitor
As far as I know everything works through the kali bugtracker: https://bugs.kali.org/main_page.php
You have to create an account and than you can open an issue to ask for the implementation of bully mod' by aanarchyy
good luck!
Anybody have any idea what's wrong here?
@kali:~/bully/src# make
cc -I`pwd` -I`pwd`/utils/ -I`pwd`/tls/ -I`pwd`/wps/ -I`pwd`/crypto/ -I`pwd`/common/ -o bully bully.c -lpcap -lssl -lcrypto
bully.c:26:18: fatal error: pcap.h: No such file or directory
compilation terminated.
apt-get install libpcap-dev
Thanks but I'm now getting this error.
WARNING: The following packages cannot be authenticated!
libpcap0.8-dev libpcap-dev
Install these packages without verification? [y/N] Y
Err http://http.kali.org/kali/ sana/main libpcap0.8-dev i386 1.6.2-2
404 Not Found
Err http://http.kali.org/kali/ sana/main libpcap-dev all 1.6.2-2
404 Not Found
E: Failed to fetch http://http.kali.org/kali/pool/main/...6.2-2_i386.deb 404 Not Found
E: Failed to fetch http://http.kali.org/kali/pool/main/....6.2-2_all.deb 404 Not Found
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
It looks like you may have a problem with your sources.list, try this:
Replace everything with the sources for your distribution: http://docs.kali.org/general-use/kal...t-repositoriesCode:gedit /etc/apt/sources.list
Save and exit, then:
Code:apt-get update apt-get upgrade apt-get install libpcap-dev libssl-dev libsqlite3-dev
Thanks sox, I've managed to get a bit further but it now has this.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libssl-dev : Depends: libssl1.0.0 (= 1.0.1k-3) but 1.0.1k-3+deb8u1 is to be installed
Recommends: libssl-doc but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Kcdtv, I followed your advice and opened the suggestion: https://bugs.kali.org/view.php?id=3745 . Maybe somebody may pay attention to this. I think is very interesting for bully users... as you know, ralink chipset + reaver = disaster , and I have an Alfa with Ralink chipset. Bully saved my life for all testing of WPS part of the script I'm developing, you know that because you are a collaborator... I don't want to put a link to my project to avoid spamming you on this forum.![]()
Hi all,
I just installed bully on my system and I was curious if I was able to crack my own wifi router. My question: is it normal that the pin set from bully never change to random but always the same? What is causing this?
Code:[+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx( Auth ) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Sent packet not acknowledged after 3 attempts [+] Tx( Assn ) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx( ID ) = 'Timeout' Next pin '11533917' [+] Sent packet not acknowledged after 3 attempts [+] Tx(DeAuth) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [!] Received M2D or out of sequence WPS Message [+] Rx(M2D/M3) = 'WPSFail' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( Assn ) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( Auth ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( ID ) = 'Timeout' Next pin '11533917' [+] Rx(Beacon) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'WPSFail' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( M1 ) = 'Timeout' Next pin '11533917' [+] Rx( Assn ) = 'Timeout' Next pin '11533917'
It stuck if is not able to perform the attempt. Maybe your home's router has PBC activated (push button connect) and needs to push the button physically in order to accept wps connections. You can check it using airodump-ng with --wps parameter (available from aircrack 1.2 rc2 I think, not sure). Start scanning and let it long time. After a few minutes, on WPS column start to appear interesting data like this (PBC) on some routers.
Last edited by v1s1t0r; 2016-12-06 at 12:16. Reason: more detailed data
Or your connection is crappy, unsupported wireless card, WPS is enabled but not configure, AP is low on entropy, there are literally 1,000 reasons as to why there may be a problem.
It helps if you give more information about the target. Since it is yours, you should be able to do that.
hello annarchyy ? i got some problem at bully install pixiewps. (make: *** [bully] Error 1)
Sorry for answer maybe too late. To build correctly bully with latest Kali releases you must "downgrade" libssl-dev package. I mean, if you doand thenapt-get remove libssl-dev. After this you can compile successfully bully following the github instructions, you know:apt-get install libssl1.0-dev
Hope it helps.
Fresh news. Yesterday wiire (the author of pixiewps) updated the aanarchyy bully project. The version is still the 1.1 and it hasn't any new feature but he solved the problems on compilation. He removed the dependency of libssl-dev. Now the compilation is very fast and flawless.
https://github.com/aanarchyy/bully