Bully modified to implement pixiewps attack

[D3ADSHOT]

Hi all,

I just installed bully on my system and I was curious if I was able to crack my own wifi router. My question: is it normal that the pin set from bully never change to random but always the same? What is causing this?

[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx( Auth ) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx( Assn ) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(  ID  ) = 'Timeout'   Next pin '11533917'
[+] Sent packet not acknowledged after 3 attempts
[+] Tx(DeAuth) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[!] Received M2D or out of sequence WPS Message
[+] Rx(M2D/M3) = 'WPSFail'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx( Assn ) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx( Auth ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  ID  ) = 'Timeout'   Next pin '11533917'
[+] Rx(Beacon) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'WPSFail'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx(  M1  ) = 'Timeout'   Next pin '11533917'
[+] Rx( Assn ) = 'Timeout'   Next pin '11533917'