Results 1 to 3 of 3

Thread: Problem with twrpFlash.sh script

  1. #1
    Join Date
    2016-Jan
    Posts
    4

    Problem with twrpFlash.sh script

    Hello,
    I having issue with one of the installation script provided with Kali NetHunter Linux Root Toolkit.

    I flashed stock Android 6.0 just fine and also it flashes the TWRP recovery but it fails to push SuperSU and Nethunter zip to the phone (Nexus 5).

    Because the stock installation script worked I think I have set up everything correctly.
    ---------------------------------------------------------------------------------------------------------------------------------
    Here is copy from command line:
    ---------------------------------------------------------------------------------------------------------------------------------
    root@kali ~/Nethunter $ ./twrpFlash.sh
    NETHUNTER LINUX FLASH (TWRP, SuperSU and Kali Nethunter)

    CHECKING PRE-REQUISITES

    Checking if adb is installed
    adb FOUND
    Checking if adb is installed DONE

    ./twrpFlash.sh: 29: ./twrpFlash.sh: cannot open 1.0.32: No such file
    ./twrpFlash.sh: 29: ./twrpFlash.sh: [[: not found
    You are using the latest version of ADB 1.0.31
    Checking if fastboot is installed
    fastboot FOUND
    Checking if fastboot is installed DONE

    Adb connection check
    ADB device detected.
    Adb connection check DONE

    Checking TWRP image existence
    Dir twrpImage/ has files
    Checking TWRP image existence DONE

    Checking SuperSu existence
    Dir superSu/ has files
    Checking SuperSu existence DONE

    Checking Kali Nethunter zip existence
    Dir kaliNethunter/ has files
    Checking Kali Nethunter zip existence DONE

    CHECKING PRE-REQUISITES DONE

    Sending Kali Nethunter zip to the device
    *here I get giant ADB prompt help with all the commands*

    Sending Kali Nethunter zip to the device DONE

    Sending SuperSu zip to the device
    *here again I get prompted wiith help of ADB commands*

    Sending SuperSu zip to the device DONE

    Rebooting into bootloader
    Rebooting into bootloader DONE

    Flashing TWRP image
    target reported max download size of 1073741824 bytes
    sending 'recovery' (14694 KB)...
    OKAY [ 0.577s]
    writing 'recovery'...
    OKAY [ 1.133s]
    finished. total time: 1.710s
    Flashing TWRP image DONE

    Booting into TWRP (20 secs dont worry)
    downloading 'boot.img'...
    OKAY [ 0.577s]
    booting...
    OKAY [ 0.117s]
    finished. total time: 0.694s
    Booting into TWRP DONE

    Installing SuperSU
    Unable to locate zip file '/sdcard/supersu.zip'.
    Installing '/sdcard/supersu.zip'...
    Checking for MD5 file...
    Skipping MD5 check: no MD5 file found
    E:Failed to sysMapFile '/sdcard/supersu.zip'
    E:Error installing zip file '/sdcard/supersu.zip'
    Done processing script file
    Installing SuperSU DONE!

    Installing Kali Linux Nethunter
    Unable to locate zip file '/sdcard/kaliNethunter.zip'.
    Installing '/sdcard/kaliNethunter.zip'...
    Checking for MD5 file...
    Skipping MD5 check: no MD5 file found
    E:Failed to sysMapFile '/sdcard/kaliNethunter.zip'
    E:Error installing zip file '/sdcard/kaliNethunter.zip'
    Done processing script file
    Installing Kali Linux Nethunter DONE!
    Rebooting into Kali Linux Nethunter
    Everything is installed. Phone should be booting up! Enjoy
    --------------------------------------------------------------------------------------------------------------------------------------------


    It looks like the command for pushing files is incorrect somehow or it fails. Maybe that is why I get prompt with ADB help in the middle of the script.

    Can you assist me ?

  2. #2
    Please remove the "-p" from the adb push command at line 50 & line 55 in the twrpFlash.sh and try it again.

    Like this:
    Code:
    echo "Sending Kali Nethunter zip to the device"
    adb push $nhZip $sdnh
    sleep 3
    echo "Sending Kali Nethunter zip to the device DONE\n"
    
    echo "Sending SuperSu zip to the device"
    adb push $superSuZip $sdSupersu
    sleep 3
    echo "Sending SuperSu zip to the device DONE\n"
    I should need some minutes to push the big Nethunter.zip to your device.

  3. #3
    Join Date
    2016-Jan
    Posts
    4
    Thank you, it helped.

Similar Threads

  1. Saving a bash script fails due to GVfs problem
    By relayer77 in forum General Archive
    Replies: 0
    Last Post: 2020-08-14, 23:02
  2. Raspberry pi 2 and rpi-tft script
    By hightech316 in forum ARM Archive
    Replies: 2
    Last Post: 2016-03-02, 22:45
  3. Replies: 0
    Last Post: 2016-01-12, 14:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •