Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: Sana to rolling there are no sound at all

  1. #1
    Senior Member
    Join Date
    Apr 2013
    Posts
    132

    Sana to rolling there are no sound at all

    hi friends , i had updated sana to rolling . there are some problems .

    1. no sound any more

    there are no output devices can select from sound . system setting >> sound .

    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    lspci -v | grep Audio
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    Subsystem: CLEVO/KAPOK Computer Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset High Definition Audio Controller

  2. #2
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    Could anyone can help with this ?

  3. #3
    Junior Member
    Join Date
    Aug 2015
    Posts
    7
    no device listed while access sound settings, alsamixer also not working on sana , need help

  4. #4
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    cat /proc/asound/cards
    0 [HDMI ]: HDA-Intel - HDA Intel HDMI
    HDA Intel HDMI at 0xf7a14000 irq 32
    1 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf7a10000 irq 31

  5. #5
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    lsmod | grep snd
    snd_hda_codec_hdmi 45056 1
    snd_hda_codec_via 20480 1
    snd_hda_codec_generic 65536 1 snd_hda_codec_via
    snd_hda_intel 28672 0
    snd_soc_rt5640 73728 0
    snd_hda_codec 94208 4 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_codec _generic,snd_hda_intel
    snd_soc_rl6231 16384 1 snd_soc_rt5640
    snd_hda_core 45056 5 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_codec _generic,snd_hda_codec,snd_hda_intel
    snd_soc_core 135168 1 snd_soc_rt5640
    snd_hwdep 16384 1 snd_hda_codec
    snd_compress 20480 1 snd_soc_core
    snd_pcm 81920 6 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd _hda_codec,snd_hda_intel,snd_hda_core
    snd_timer 28672 1 snd_pcm
    regmap_i2c 16384 1 snd_soc_rt5640
    snd 57344 10 snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdm i,snd_hda_codec_via,snd_pcm,snd_hda_codec_generic, snd_hda_codec,snd_hda_intel,snd_compress
    snd_soc_sst_acpi 16384 0
    soundcore 16384 1 snd

  6. #6
    Junior Member
    Join Date
    Jan 2016
    Posts
    6
    I had the same issue. This is what I did to fix it. I ran the following command:

    pulseaudio

    And then my sound was back. It looks like pulseaudio doesn't startup whenever Kali starts up.

  7. #7
    Junior Member
    Join Date
    Jan 2016
    Posts
    1
    I have the same problem.
    Could anyone can help with this ?
    Thank you!

  8. #8
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    pulseaudio
    W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
    E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
    E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed.

  9. #9
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    i removed ~/.config/pulse

    and pkill -9 pulseaudio

    restarted pulseaudio .

    in system setting sound , there are still no devices for select .

    still no sound at all

  10. #10
    Senior Member
    Join Date
    Apr 2013
    Posts
    132
    #!/usr/bin/pulseaudio -nF
    #
    # This file is part of PulseAudio.
    #
    # PulseAudio is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    #
    # PulseAudio is distributed in the hope that it will be useful, but
    # WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    # General Public License for more details.
    #
    # You should have received a copy of the GNU Lesser General Public License
    # along with PulseAudio; if not, write to the Free Software Foundation,
    # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

    # This startup script is used only if PulseAudio is started per-user
    # (i.e. not in system mode)

    .nofail

    ### Load something into the sample cache
    #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
    #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-access /usr/share/sounds/generic.wav

    .fail

    ### Automatically restore the volume of streams and devices
    load-module module-device-restore
    load-module module-stream-restore
    load-module module-card-restore

    ### Automatically augment property information from .desktop files
    ### stored in /usr/share/application
    load-module module-augment-properties

    ### Load audio drivers statically
    ### (it's probably better to not load these drivers manually, but instead
    ### use module-udev-detect -- see below -- for doing this automatically)
    #load-module module-alsa-sink
    #load-module module-alsa-source device=hw:1,0
    #load-module module-oss device="/dev/dsp" sink_name=output source_name=input
    #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
    #load-module module-null-sink
    #load-module module-pipe-sink

    ### Automatically load driver modules depending on the hardware available
    .ifexists module-udev-detect.so
    load-module module-udev-detect
    .else
    ### Use the static hardware detection module (for systems that lack udev/hal support)
    load-module module-detect
    .endif

    ### Automatically connect sink and source if JACK server is present
    .ifexists module-jackdbus-detect.so
    .nofail
    load-module module-jackdbus-detect
    .fail
    .endif

    ### Automatically load driver modules for Bluetooth hardware
    .ifexists module-bluetooth-discover.so
    load-module module-bluetooth-discover
    .endif

    ### Load several protocols
    .ifexists module-esound-protocol-unix.so
    load-module module-esound-protocol-unix
    .endif
    load-module module-native-protocol-unix

    ### Network access (may be configured with paprefs, so leave this commented
    ### here if you plan to use paprefs)
    #load-module module-esound-protocol-tcp
    #load-module module-native-protocol-tcp
    #load-module module-zeroconf-publish

    ### Load the RTP receiver module (also configured via paprefs, see above)
    #load-module module-rtp-recv

    ### Load the RTP sender module (also configured via paprefs, see above)
    #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
    #load-module module-rtp-send source=rtp.monitor

    ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
    ### Please keep in mind that the modules configured by paprefs might conflict with manually
    ### loaded modules.
    .ifexists module-gconf.so
    .nofail
    load-module module-gconf
    .fail
    .endif

    ### Automatically restore the default sink/source when changed by the user
    ### during runtime
    ### NOTE: This should be loaded as early as possible so that subsequent modules
    ### that look up the default sink/source get the right value
    load-module module-default-device-restore

    ### Automatically move streams to the default sink if the sink they are
    ### connected to dies, similar for sources
    load-module module-rescue-streams

    ### Make sure we always have a sink around, even if it is a null sink.
    load-module module-always-sink

    ### Honour intended role device property
    load-module module-intended-roles

    ### Automatically suspend sinks/sources that become idle for too long
    load-module module-suspend-on-idle

    ### If autoexit on idle is enabled we want to make sure we only quit
    ### when no local session needs us anymore.
    .ifexists module-console-kit.so
    load-module module-console-kit
    .endif
    .ifexists module-systemd-login.so
    load-module module-systemd-login
    .endif

    ### Enable positioned event sounds
    load-module module-position-event-sounds

    ### Cork music/video streams when a phone stream is active
    load-module module-role-cork

    ### Modules to allow autoloading of filters (such as echo cancellation)
    ### on demand. module-filter-heuristics tries to determine what filters
    ### make sense, and module-filter-apply does the heavy-lifting of
    ### loading modules and rerouting streams.
    load-module module-filter-heuristics
    load-module module-filter-apply

    ### Load DBus protocol
    .ifexists module-dbus-protocol.so
    load-module module-dbus-protocol
    .endif

    # X11 modules should not be started from default.pa so that one daemon
    # can be shared by multiple sessions.

    ### Load X11 bell module
    #load-module module-x11-bell sample=bell-windowing-system

    ### Register ourselves in the X11 session manager
    #load-module module-x11-xsmp

    ### Publish connection data in the X11 root window
    #.ifexists module-x11-publish.so
    #.nofail
    #load-module module-x11-publish
    #.fail
    #.endif

    load-module module-switch-on-port-available

    ### Make some devices default
    #set-default-sink output
    #set-default-source input

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •