Nethunter 3.0 Nexus 6 PATH and External WiFi Issues

[geoff.pentest]

I'm having some issues with Nethunter 3.0.1 on a Nexus 6 running Android Marshmallow in the Kali Terminal. I've got a TPLINK TL-WN722N and an Alfa AWUS036NH that are detected when i check lsusb, but I cannot bring up either using ifconfig (i get an error saying no such device), or are detected when I run iwconfig. Also, for some reason /sbin is not being registered as being in my PATH, even after checking ~/.profile and adding it to the PATH section, however if I add a custom command in Nethunter to export PATH=$PATH:/sbin, it works. I'm not sure why its an issue, but seems like something that shouldn't happen.

Any help/suggestions?


Thanks!

-Geoff

[geoff.pentest]

here's my dmesg output from disconnecting and reconnecting
982.141804] platform qcom,smp2pgpio-rdbg-1-out.28: Driver smp2pgpio requests probe deferral
[ 1021.641688] usb 3-1: USB disconnect, device number 12
[ 1021.880555] msm-dwc3 f9200000.ssusb: DWC3 in low power mode
[ 1029.236755] otg_oc_handler: rt_stat = 0x40
[ 1029.252852] msm-dwc3 f9200000.ssusb: DWC3 exited from low power mode
[ 1029.275428] msm-dwc3 f9200000.ssusb: DWC3 in low power mode
[ 1029.517764] msm-dwc3 f9200000.ssusb: DWC3 exited from low power mode
[ 1029.626399] msm_dwc3_irq: IRQ outside LPM
[ 1029.745437] usb 3-1: new high-speed USB device number 13 using xhci-hcd
[ 1029.777062] usb 3-1: New USB device found, idVendor=0cf3, idProduct=9271
[ 1029.777115] usb 3-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1029.777159] usb 3-1: Product: USB2.0 WLAN
[ 1029.777199] usb 3-1: Manufacturer: ATHEROS
[ 1029.777239] usb 3-1: SerialNumber: 12345
[ 1029.788765] gpiochip_find_base: found new base at 559
[ 1029.791035] gpiochip_add: registered GPIOs 559 to 590 on device: rdbg
[ 1029.793531] platform qcom,smp2pgpio-rdbg-1-in.26: Driver smp2pgpio requests probe deferral
[ 1029.796217] gpiochip_find_base: found new base at 559
[ 1029.797972] gpiochip_add: registered GPIOs 559 to 590 on device: rdbg
[ 1029.798580] platform qcom,smp2pgpio-rdbg-1-out.28: Driver smp2pgpio requests probe deferral

[geoff.pentest]

Anyone have suggestions? if this has been addressed before, I apologize but I have not found a solution and I'd like to use all the features of net hunter. Can someone help me out?

[Duane]

Open custom command - Add command -
label:
Monitor mode
command:
ifconfig wlan1 up && airmon-ng start wlan1
send to : Kali
Exec mode : Background
Leave
Run at boot -
Then tap on Update.
When start run custom command and Monitor mode - tap RUN