Hi,

I'm trying to set up a rouge AP on my Kali Sana 64-bit running as a virtual machine on virtualbox and I get to a point where I can't start my DHCP Server.

[....] Starting isc-dhcp-server (via systemctl): isc-dhcp-server.serviceJob for isc-dhcp-server.service failed because the control process exited with error code. See "systemctl status isc-dhcp-server.service" and "journalctl -xe" for details.
failed!
This is the report I get by running the command
Code:
systemctl status isc-dhcp-server.service
:

● isc-dhcp-server.service - LSB: DHCP server
Loaded: loaded (/etc/init.d/isc-dhcp-server; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2016-01-25 02:25:18 CET; 45s ago
Docs: man:systemd-sysv-generator(8)
Process: 2011 ExecStart=/etc/init.d/isc-dhcp-server start (code=exited, status=1/FAILURE)

Jan 25 02:25:18 myvkali systemd[1]: Starting LSB: DHCP server...
Jan 25 02:25:18 myvkali dhcpd[2017]: Internet Systems Consortium DHCP Serve....3
Jan 25 02:25:18 myvkali dhcpd[2017]: Copyright 2004-2015 Internet Systems C...m.
Jan 25 02:25:18 myvkali dhcpd[2017]: All rights reserved.
Jan 25 02:25:18 myvkali dhcpd[2017]: For info, please visit https://www.isc...p/
Jan 25 02:25:18 myvkali isc-dhcp-server[2011]: dhcpd service already running...!
Jan 25 02:25:18 myvkali systemd[1]: isc-dhcp-server.service: Control proces...=1
Jan 25 02:25:18 myvkali systemd[1]: Failed to start LSB: DHCP server.
Jan 25 02:25:18 myvkali systemd[1]: isc-dhcp-server.service: Unit entered f...e.
Jan 25 02:25:18 myvkali systemd[1]: isc-dhcp-server.service: Failed with re...'.
Hint: Some lines were ellipsized, use -l to show in full.
This is the contents of my
Code:
dhcpd.conf
file:

authoritative;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
option subnet-mask 255.255.255.0;
option domain-name "freewifi";
option domain-name-servers 192.168.1.1;
range 192.168.1.2 192.168.1.254;
}