Originally Posted by
RaspberryPIMani100X
Hi All,
Firstly hope this is the correct place to post, if not let me know. Ok, so to begin I've flashed SD withKali*2.1 .img, and setup Wifi dongle to load on startup. So internet will not connect on boot, this only happens after I log into GUI (forced to login on boot) After login I see below:
enx74da3826a5f7: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.11 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::76da:38ff:fe26:a5f7 prefixlen 64 scopeid 0x20<link>
ether 74:da:38:26:a5:f7 txqueuelen 1000 (Ethernet)
RX packets 9415 bytes 1029732 (1005.5 KiB)
RX errors 0 dropped 51 overruns 0 frame 0
TX packets 13338 bytes 13640299 (13.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
It seems despite setting wlan0 in /etc/network/interfaces, its getting renamed on boot (by kernel):
auto wlan0
allow-hotplug wlan0
iface wlan0 inet manual
ssid TALKTALK-XXXXFE
psk XXXXXXXXX
key_mgmt WPA-PSK
What I'm really after is a headless pi running*Kali, that is connectable with out having to login. Preference is really not to launch GUI @ all, but that's another story*. Let me know if you need any other information, but I'm @ my wits end with this one**!
Cheers,
RaspberryPIMani100X