nexus10-TP-Link_TP_WN722N_Driver or Kernel issue

[bonsainetz]

#########################
## Hardware SETUP #####
## - Nexus10
## - TP-Link TL-WN722N
## - Hama OTG cable
#########################
## Software SETUP #####
## Android-Version 5.1.1 https://developers.google.com/androi...s#instructions
## Kernel-Version 3.4.67-00092-g7b02438
## Build-Number LMY49G
## NetHunter V.3.0 https://www.offensive-security.com/k...nter-download/
#########################
## main instruction ###
## https://github.com/offensive-securit...nethunter/wiki
## nethunter-LRT WELL DONE DEVELOPER! nethunter-LRT https://github.com/offensive-security/nethunter-LRT

With this setup and instructions everything Nethunting & apps of google works perfekt!
But for now I would like to bring up my TL-WN722N stick for WiFite, yet without succsess.

on posibility was to install atheros driver "apt-get install firmware-atheros" done! and seams to be ok.

if I show "lsusb" it shows
BUS 001 Device 002: ID 0cf3:9271 Atheros Communication, Inc. AR9271 802.11n

Iwconfig and IFonfig doesent shows the TP-Link Adapter


The TL-WN722N works with my kali raspberry & Main Ubuntu OS
I have tryed to build my own kernel without succsess (https://github.com/offensive-securit...ding-Nethunter)
somone has an Idea how can I bring in the driver?

I has read a lot of stuff and doesent found a solution for my issue.

on of interesting post was to compile a new kernel with included driver, but how?
old tread-> enable driver on kernel
http://forum.xda-developers.com/site...kali%20nexus10
forum.xda-developers.com/google-nexus-5/orig-development/guide-convert-phone-pwn-phone-t2852293
https://wiki.cyanogenmod.org/w/Google_Apps
https://forums.kali.org/forumdisplay...tHunter-Forums

could someone assist or has found a other simple solution
thanks in advance
bonsaiuser

[Phreya]

Your problem is with your OTG cable. You need OTG Y cable in order to use this adapter. It requires more power that the phone itself cannot provide.

[bonsainetz]

Hi Phreya,
thanks for your fast replay. let me try to explain, before I post this summary I tryed to connect usb hub with external powersupply, but alos without succsess.

TP-link -> usb hub(with external Power) -> OTG -> Nexus

ok, I will post a feedback if i have the otg Y cable.
thanks a lot
cheers

[bonsainetz]

dear Phreya,
so mow i got a OTG Y cable, but it dosent work.
do you have any ideas to fix this challenge?

thanks in advance

[bonsainetz]

Dear all,
now I got a otgy cable. To make sure that already is working fine I have all (Android / nethunter etc.) new install. One try was to build with cm13 without success. (Read some Post of Phreya)
No with the new Setup (atheros-driver includ) I got e new message.
Like that " libudev: udev_has_devtmpfs: name_to_handle_at on /dev: Function not implemented"
I found this post
https://forums.kali.org/showthread.p...alized-working

Could someone please explain how makae a new Kernel?
I need to understand the basic to follow up
https://github.com/offensive-securit...ing-the-Kernel

Thanks in advance
Bonsainetz

[Phreya]

Well, it's basically... you'll be modifying some of the code of the kernel source code in order to get it working. There are 3 (+1) essential patches that are mandatory in order to get it working with NetHunter. The last link you posted explains step-by-step how to do so... If you have any questions, don't hesitate to post / come to IRC and ask around.