Results 1 to 4 of 4

Thread: Covertly add alfa card to your phone

  1. #1
    Join Date
    Things to note doing this:
    Need a quality iron and decent solder skills

    Keep the wires as short as possible, and try to make the D+ and D- as close to the same length as possible

    Dont forget about the ID pin for the OTG off the phone micro USB, this has to be grounded.

    Going to need a switch, both to save power and deactivate the OTG so you can charge. There might be a better way to do this but I didn't bother as this works.

    The wiring on the switch I used (might be a better way again) was one pole only the Ground from the phone, the other pole has both the ID wire from the phone, and the ground from the alfa card.

    The rest is self explanatory I think. Dont forget glue on the connections to make it a bit more robust.

    Last edited by maiki; 2016-09-23 at 10:06. Reason: Merge posts

  2. #2
    Join Date
    If it works good then good job! Glad you were able to make it work.

  3. #3
    Join Date
    i think i got enuff junk around. a good deal of cheap chinese athros chips, some monsters some aderall. what phone to break. some clown porn ive got a saturday planned. all with a paper clip and duct tape

  4. #4
    Join Date
    The image links are broken. Do you mind re-uploading them?

Similar Threads

  1. Buying Alfa Card
    By Chunkingz in forum General Archive
    Replies: 1
    Last Post: 2016-08-22, 10:38
  2. Alfa card not working
    By Digitalbulletz in forum NetHunter General Questions
    Replies: 3
    Last Post: 2014-10-22, 15:20
  3. Alfa AWUS036H on an Android phone using a kali image
    By Rocketballz in forum General Archive
    Replies: 0
    Last Post: 2013-08-10, 06:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts