Hello, as the title says I have installed Kali into a veritualbox environment. I am now trying to control a usb wireless adapter but Kali doesn't seem to be able to do this.
Kali sees it connected as follows:
lsusb
[code]
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13b1:003f Linksys WUSB6300 802.11a/b/g/n/ac Wireless Adapter [Realtek RTL8812AU]
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]
lsusb -v
Code:
Bus 001 Device 003: ID 13b1:003f Linksys WUSB6300 802.11a/b/g/n/ac Wireless Adapter [Realtek RTL8812AU]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13b1 Linksys
idProduct 0x003f WUSB6300 802.11a/b/g/n/ac Wireless Adapter [Realtek RTL8812AU]
bcdDevice 0.00
iManufacturer 1 Linksys
iProduct 2 WUSB6300
iSerial 3 34
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
I installed the driver for te adapter with ndiswrapper.
Here you see that it is already installed
Code:
root@kali:~# ndiswrapper -i /media/cdrom/adapter/driver/Win81X64/netrtwlanu.inf
driver netrtwlanu is already installed
root@kali:~# ndiswrapper -m
module configuration already contains alias directive
I disconnected the adapter and then reconnected. demsg doesn't show any issues:
Code:
[ 1802.328376] usb 1-2: USB disconnect, device number 3
[ 1806.735177] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 1806.866243] usb 1-2: New USB device found, idVendor=13b1, idProduct=003f
[ 1806.866251] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1806.866255] usb 1-2: Product: WUSB6300
[ 1806.866258] usb 1-2: Manufacturer: Linksys
[ 1806.866260] usb 1-2: SerialNumber: 34
But when I look at the loaded modules I cannot find it. What am I doing wrong?
Thank you in advance for your help.