Results 1 to 3 of 3

Thread: Kali linux 2016.2 amd64 problem AWUS036H wifi card

  1. #1

    Exclamation Kali linux 2016.2 amd64 problem AWUS036H wifi card

    Hello guy's!
    Help solve the problem with the WiFi card AWUS036H.

    Hardware:
    Ultabook Samsung Active book 4 NP470R5E
    Wifi card Alfa Network AWUS036H
    Native Wifi card Qualcomm Atheros AR9485 Wireless Network Adapter

    Software:
    Kali Linux 2016.2 amd64
    Reaver v1.5.2
    Wash v1.5.2
    dmesg | grep -i usb (result)
    Code:
    [ 1644.380203] usb 3-4: Product: 802.11 n WLAN
    [ 1644.380205] usb 3-4: Manufacturer: Ralink
    [ 1644.380207] usb 3-4: SerialNumber: 1.0
    [ 1644.586697] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
    [ 1644.793184] usbcore: registered new interface driver rt2800usb
    [ 1644.869687] rt2800usb 3-4:1.0: firmware: direct-loading firmware rt2870.bin
    lsusb (result)
    Code:
    Bus 002 Device 003: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 0c45:64e0 Microdia 
    Bus 001 Device 011: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
    Bus 003 Device 002: ID 279e:024e  
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Wifi Router:
    TP-LINK Wireless N Router WR841N
    WPS enabled.

    When I hacking wps pin with Wifi card Qualcomm Atheros AR9485 Wireless Network Adapter turns out everything is fine.
    And when using AWUS036H it is impossible to hacking wps pin!
    Using Wifi card Alfa Network AWUS036H
    Airmong-ng result:
    Code:
    PHY	Interface	Driver		Chipset
    
    phy0	wlan0		ath9k		Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    phy4	wlan1		rt2800usb	Ralink Technology, Corp. RT2870/RT3070
    Command set:
    airmon-ng check kill
    airmon-ng start wlan1
    wash -i wlan1mon (Error):
    Code:
    Wash v1.5.2 WiFi Protected Setup Scan Tool
    Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
    mod by t6_x <[email protected]> & DataHead & Soxrok2212
    
    BSSID                  Channel       RSSI       WPS Version       WPS Locked        ESSID
    ---------------------------------------------------------------------------------------------------------------
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    [!] Found packet with bad FCS, skipping...
    wash -i wlan1mon -C (Result)
    Code:
    Wash v1.5.2 WiFi Protected Setup Scan Tool
    Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
    mod by t6_x <[email protected]> & DataHead & Soxrok2212
    
    BSSID                  Channel       RSSI       WPS Version       WPS Locked        ESSID
    ---------------------------------------------------------------------------------------------------------------
    {mac}       1            -67        1.0               No                ESSID
    {mac}      10           -29        1.0               No                ESSID
    aireplay-ng -9 wlan1mon (result)
    Code:
    22:06:27  Trying broadcast probe requests...
    22:06:28  Injection is working!
    22:06:29  Found 2 APs
    
    22:06:29  Trying directed probe requests...
    22:06:29  {MAC} - channel: 10 - ''
    22:06:29  Ping (min/avg/max): 1.214ms/12.040ms/60.543ms Power: -64.76
    22:06:29  29/30:  96%
    
    22:06:29  {MAC} - channel: 10 - 'ESSID'
    22:06:30  Ping (min/avg/max): 1.328ms/4.994ms/12.332ms Power: -41.07
    22:06:30  28/30:  93%
    reaver -i wlan1mon -c 10 -b {mac} -vv -K 1(Result)
    Code:
    Reaver v1.5.2 WiFi Protected Setup Attack Tool
    Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
    mod by t6_x <[email protected]> & DataHead & Soxrok2212
    
    [+] Switching wlan1mon to channel 10
    [+] Waiting for beacon from {mac}
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    ^C
    [+] Nothing done, nothing to save.
    OR

    Code:
    [+] Switching wlan1mon to channel 10
    [+] Waiting for beacon from {mac}
    [!] WARNING: Failed to associate with {mac} (ESSID: (null))
    [!] WARNING: Failed to associate with {mac} (ESSID: (null))
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [!] WARNING: Failed to associate with {mac} (ESSID: ESSID)
    [+] Associated with {mac} (ESSID: ESSID)
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x02), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x03), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x03), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x03), re-trying last pin
    ^ C
    [+] Nothing done, nothing to save.
    I tried to use all the available options reaver. Does not help

    When these commands are used to set native wifi card everything works fine

    I found a solution to the problem but have not yet applied. Here is a link http://xiaopan.co/forums/threads/alf...6h-problem.45/. Another found a way to backtrack link: http://www.backtrack-linux.org/forum...ad.php?t=44897 AND For kali 2.0 http://unix.stackexchange.com/questi...driver-on-kali check whether a given solution fits the Kali linux 2016.2 amd64?

    In advance thank you for every response
    I apologize for the grammatical errors
    Last edited by GhostWarriorS; 2016-12-10 at 17:08. Reason: add information

  2. #2
    Join Date
    2016-Dec
    Posts
    1
    The answer to your problem is in your last link http://unix.stackexchange.com/questi...driver-on-kali you got to buy a new one...

  3. #3
    Thanks) Already corrected!

Similar Threads

  1. Replies: 0
    Last Post: 2017-02-28, 13:57
  2. Replies: 1
    Last Post: 2016-02-26, 09:09

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •