Results 1 to 2 of 2

Thread: Evil Twin Adapter Won't Forward Traffic

  1. #1
    Join Date

    Evil Twin Adapter Won't Forward Traffic


    This is my first time posting to a forum because usually solutions have already been found for most issues. I however, have had zero luck getting my evil twin network to work. It is for my Penetration Testing class in college and I am at a complete loss as to what might be causing my issues.

    I am running Kali within VMware using a replicated internet connection and I use eth0 as my route to the internet and at0 as my AP. I can connect to my wireless network and receive an IP address however, I receive a DNS error when trying to access the internet. Another possibly related problem is that my adapter crashes shortly after I connect. I received this error the last time it happened:
    wi_read(): Network is down
    Error: Got channel -1 expected a value > 0

    My network is configured as such:

    I created a network and am trying to access the gateway on the network.

    These are my configurations:


    subnet netmask {
    option domain-name-servers
    option domain-name mywifi
    option routers
    default-lease-time 600;
    max-lease-time 7200;

    ifconfig at0 netmask

    ifconfig at0 mtu 1800

    route add -net netmask gw

    iptables commands:

    iptables -P FORWARD ACCEPT
    iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

    Once proven that I can forward traffic I would like to direct traffic to 10000 and monitor with ettercap but at the moment I would be content just to get the internet to work.
    Any help is greatly appreciated

  2. #2
    Join Date
    in a computer
    What hardware are you using? Is it compatible with aircrack-ng (i.e. monitor mode & packet injection)? In general, I try to avoid wireless work within a VM...always been problematic for me.

Similar Threads

  1. Evil Twin Attack
    By Jamesthomas in forum General Archive
    Replies: 5
    Last Post: 2015-10-19, 23:11

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts