Results 1 to 4 of 4

Thread: SOLUTION: Kali Linux on Raspberry Pi Zero W with bluetooth and wifi support

  1. #1
    Member
    Join Date
    Nov 2015
    Location
    Australia
    Posts
    71

    Lightbulb SOLUTION: Kali Linux on Raspberry Pi Zero W with bluetooth and wifi support

    Hi all,

    I've updated the Re4son-Kernel to support the new Raspberry Pi Zero W with onboard bluetooth and wifi.

    There is now one kernel package that provides support for:

    Raspberry Pi 1
    Raspberry Pi 2
    Raspberry Pi 3 with onboard wifi and bluetooth
    Raspberry Pi Zero
    Raspberry Pi Zero W with onboard wifi and bluetooth

    Highlights:

    - Based on 4.4.50 kernel sources
    - Support for all common TFT screens
    - Support for built-in wifi and bluetooth
    - Ethernet gadget support
    - Nexmon drivers with installation instruction
    - Wifi injection patch

    The package, installation guide and unofficial kali images with the re4son-kernel already installed are available here:

    https://www.whitedome.com.au/re4son/re4son-kernel

    Happy hacking,
    Re4son
    Last edited by re4son; 2017-04-02 at 02:51 AM.
    ----------------------------------------
    Check out "Sticky Fingers Kali-Pi":
    https://whitedome.com.au/kali-pi

    Now with mana-toolkit and more goodies!

  2. #2
    Junior Member
    Join Date
    Sep 2015
    Posts
    4
    Awesome Thx!

  3. #3
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    Hey thanks for creating this build. I'm surprised that Kali.org haven't update their Raspberry Kali image to ensure that it will work on Zero.

    I would like to configure Zero W using headless setup and is automated to:
    1) persistence boot into CLI with an option to start GUI on-demand using startx. This due to laggy GUI.
    2) enable SSH at boot
    3) enable VNC at boot
    4) auto connect by WiFi to a known network at boot
    5) enable on-demand remote access to Zero W outside of local network

    What do I need to do to achieve all of the above objectives? Thanks!

  4. #4
    Member
    Join Date
    Nov 2015
    Location
    Australia
    Posts
    71
    Best to use the Sticky Fingers image, it allows for all of these out of the box:

    1) In Sticky Fingers Kali-Pi, run
    Code:
    /usr/local/src/re4son_kali-pi-tft_kernel_4.*/re4son-pi-tft-setup -b cli
    2) SSH is enabled by default
    3)
    Code:
    sudo wget -O /lib/systemd/system/vncserver@.service https://github.com/Re4son/vncservice/raw/master/vncserver@.service
    sudo systemctl enable vncserver@1.service && sudo systemctl start vncserver@1.service
    Note that vnc restricts access to requests from localhost only, you should tunnel your vnc traffic through ssh as described here: https://whitedome.com.au/re4son/topic/vnc/ (and then you might as well just start "vncserver" in the terminal window of your ssh session)
    4) disable network-manager, configure /etc/wpa_supplicant.conf and /etc/network/interfaces: https://whitedome.com.au/re4son/re4son-kernel/#Wifi
    5) As in a wifi AP?
    Last edited by re4son; 2017-04-10 at 05:06 AM.
    ----------------------------------------
    Check out "Sticky Fingers Kali-Pi":
    https://whitedome.com.au/kali-pi

    Now with mana-toolkit and more goodies!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •