Results 1 to 50 of 50

Thread: No network in Network Manager, Cant connect to wifi. But airodump-ng working

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    2017-Aug
    Posts
    23

    No network in Network Manager, Cant connect to wifi. But airodump-ng working

    I've just started kali for a month and just know all the basics. I have dual booted kali with windows using USB.

    I can search for networks using airodump-ng.But I cant connect to any of the network.

    Here are some commands:

    iwconfig
    wlan0 IEEE 802.11 ESSIDff/any
    Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
    Retry short limit:7 RTS thr=2347 B Fragment thrff
    Encryption keyff
    Power Managementff

    lo no wireless extensions.

    eth0 no wireless extensions.

    ifconfig
    eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255
    ether 54:e1:ad:1b:d4:ab txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 1 (Local Loopback)
    RX packets 56 bytes 3904 (3.8 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 56 bytes 3904 (3.8 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether fe:61:ad:65:48:99 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    lspci
    00:00.0 Host bridge: Intel Corporation Device 5910 (rev 05)
    00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
    00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
    00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
    00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
    00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
    00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 31)
    00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
    00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
    00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
    00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
    00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
    00:1f.3 Audio device: Intel Corporation Device a171 (rev 31)
    00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
    01:00.0 3D controller: NVIDIA Corporation Device 1c8d (rev a1)
    02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821AE 802.11ac PCIe Wireless Network Adapter
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

    lsusb
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 002: ID 174f:2414 Syntek
    Bus 001 Device 004: ID 18f8:0f97
    Bus 001 Device 003: ID 0bda:0821 Realtek Semiconductor Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Attached below is the photo of the network manager.
    Hopefully there is a fix to this problem.
    Attached Images Attached Images

Similar Threads

  1. Replies: 0
    Last Post: 2020-12-04, 00:00
  2. Replies: 0
    Last Post: 2020-04-19, 18:02
  3. Network Manager Disabled - Cannot connect to Interfaces.
    By jefx3 in forum TroubleShooting Archive
    Replies: 10
    Last Post: 2017-09-10, 19:40
  4. error in apt-get install network-manager network-manager-gnome
    By arsham in forum TroubleShooting Archive
    Replies: 2
    Last Post: 2014-10-05, 20:40
  5. disable network manager auto connect feature
    By brazen in forum General Archive
    Replies: 2
    Last Post: 2014-02-17, 14:18

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •