Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Monitor Mode Problem HELP!

  1. #1
    Junior Member
    Join Date
    Aug 2017
    Posts
    5

    Monitor Mode Problem HELP!

    main operating system is Debian 9.1
    Code:
    Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u3  (2017-08-06)  x86_64 GNU/Linux
    uname -v :
    Code:
    #1 SMP Debian 4.9.30-2+deb9u3  (2017-08-06)
    virtualized kali info :
    Code:
    Linux kali 4.12.0-kali1-amd64 #1 SMP Debian 4.12.6-1kali6 (2017-08-30) x86_64 GNU/Linux
    i have use kali on vmware and i use usb wireless adaptor TP LINK TL-WN722N. wireless adapter driver is

    rtl8188EUS_linux_v4.3.0.8_13968.20150417. i have installed from https://github.com/mfruba/kernel (said it was compatible with the kernel version)

    Adapter have running but when i want to change usb's mode as monitor encounter this error :
    Code:
    #iwconfig wlan0 mode monitor
    Error for wireless request "Set Mode" (8B06) :
        SET failed on device wlan0 ; Invalid argument.

  2. #2
    Senior Member
    Join Date
    Jul 2013
    Posts
    809
    To r0b0

    Go here and read page two the last few entries in the thread

    https://forums.kali.org/showthread.p...ghlight=WN722N

    Musket Teams

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    5
    I read the page you shared. my usb adapter's version v2.

    must i buy new adapter be v1 Must i buy adapter of version v1?

    or is there another resolve? etc. new driver for v2 version? ,

  4. #4
    Senior Member
    Join Date
    Oct 2016
    Location
    /dev/sda
    Posts
    811
    sudo airmon-ng
    sudo airmon-ng check
    sudo airmon-ng check kill
    sudo airmon-ng start wlan0


    How do you know wlan0 is the right interface for your wifi adapter? wlan0 is generally assigned to internal wifi adapter. It can be different for external one.
    Last edited by _defalt; 2017-09-03 at 06:54 AM.

  5. #5
    Junior Member
    Join Date
    Aug 2017
    Posts
    5
    Quote Originally Posted by _defalt View Post
    sudo airmon-ng
    sudo airmon-ng check
    sudo airmon-ng check kill
    sudo airmon-ng start wlano


    How do you know wlan0 is the right interface for your wifi adapter? wlan0 is generally assigned to internal wifi adapter. It can be different for external one.
    I tried the above codes

    sudo airmon-ng :
    Code:
    PHY	Interface	Driver		Chipset
    
    null	wlan0		r8188eu
    sudo airmon-ng check :
    Code:
    Found 4 processes that could cause trouble.
    If airodump-ng, aireplay-ng or airtun-ng stops working after
    a short period of time, you may want to run 'airmon-ng check kill'
    
       PID Name
      1871 NetworkManager
      1885 wpa_supplicant
      1888 dhclient
      1896 dhclient
    sudo airmon-ng check kill :
    Code:
    Killing these processes:
    
       PID Name
      1885 wpa_supplicant
      1888 dhclient
    sudo airmon-ng start wlano :

    Code:
    PHY	Interface	Driver		Chipset
    
    null	wlan0		r8188eu
    How do you know wlan0 is the right interface for your wifi adapter? wlan0 is generally assigned to internal wifi adapter. It can be different for external one.
    how do i know or change which have its wlan0 interface?
    i disconnect usb adapter of pc and use iwconfig but wlan0 interface disappear

  6. #6
    Senior Member
    Join Date
    Oct 2016
    Location
    /dev/sda
    Posts
    811
    Quote Originally Posted by r0b0 View Post
    sudo airmon-ng start wlano :
    It is sudo airmon-ng start wlan0

  7. #7
    Junior Member
    Join Date
    Aug 2017
    Posts
    5
    i use iwconfig and the mac adress appear as modem's mac adress.
    i think wlan0 interface the modem's interface. how can i change with usb adapter?

  8. #8
    Senior Member
    Join Date
    Oct 2016
    Location
    /dev/sda
    Posts
    811
    Quote Originally Posted by r0b0 View Post
    i use iwconfig and the mac adress appear as modem's mac adress.
    i think wlan0 interface the modem's interface. how can i change with usb adapter?
    Don't pay attention to it. wlan0 is the interface name which is automatically assigned by network-manager. Have you re-run the above commands?

  9. #9
    Junior Member
    Join Date
    Aug 2017
    Posts
    5
    yes i tried again but same result unfortunately

  10. #10
    Junior Member
    Join Date
    Sep 2017
    Location
    On your webcam
    Posts
    9
    Quote Originally Posted by r0b0 View Post
    I read the page you shared. my usb adapter's version v2.

    must i buy new adapter be v1 Must i buy adapter of version v1?

    or is there another resolve? etc. new driver for v2 version? ,
    Nope must be V1 for the 722N

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •