I am trying to test out Airmon-ng and Aircrack-ng when I was trying to make sure my wireless adapter was configured.
I am running Kali Linux on MacBook Pro through VMWare Fusion.
I ran ifconfig and noticed my wireless adapter was not coming up.
ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.23 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::20c:29ff:fe91:ef41 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:91:ef:41 txqueuelen 1000 (Ethernet)
RX packets 22190 bytes 33248713 (31.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6077 bytes 408424 (398.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 20 bytes 1116 (1.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20 bytes 1116 (1.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I also ran iwconfig
iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
My adapter is configured in the VMWare Fusion System Settings and I can get out to the internet. I can ping 8.8.8.8
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=56 time=5.69 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=56 time=8.89 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=56 time=5.67 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=56 time=7.96 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=56 time=8.56 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=56 time=8.19 ms
I would love help to resolve this.
Thank you,
