Results 1 to 6 of 6

Thread: Persistence not working on Kali Linux Live USB - Mac OS High Sierra

  1. #1
    Join Date
    2018-May
    Posts
    6

    Persistence not working on Kali Linux Live USB - Mac OS High Sierra

    Hello,

    I hope this finds you all well. I'm new to Kali Linux so please bare with me. I do have a bit of knowledge of terminal however.

    I have created a Kali Linux Live USB using Mac Linux USB Loader. I used a clean 32Gb Sandisk USB stick and i'm operating a Mac with OSX High Sierra.

    I have followed numerous tutorials which are pretty similar and the Live USB i created seems to work fine. I have not been able to try out all the applications or with it connected to a network yet but thats not why i'm posting as i want to get persistence working before going down those routes.

    During set up I created an initial partition called Kali Linux and gave it 10Gb space (MSDOS(fat)). Using Mac Linux USB Loader i put kali-linux-2018.2-amd64.iso. After that i went into the Advanced USB setup options and edited the enterprise configuration file by putting persistence at the end of Kali.

    On rebooting and holding the option key i'm greeted with the options to go back into my MacOS or use EFI. I click EFI and then given 2 options. One is to boot into Kali Linux and the other is the same but with more advanced options. Going into option 2 is where i can find an option (option 5) to boot using some sort of reference to persistence. In option 2, there are around 7 options in all. I have attached an image of these setting, hopefully you'll be able to see it.


    Question 1:
    Why am i not getting the standard blue Kali Linux Boot Menu that everyone else seems to get (pictured) where I can boot into Live USB persistence?


    When i click either option 1 or 2 i'm presented with these errors;

    Welcome to GRUB


    error: file ‘/boot/grub/x86_64-efi/zfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/xsf.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/ufs2.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/ufs1_be.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/ufs1s.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/udf.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/squash4.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/sfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/romfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/reiserfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/procfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/odc.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/ntfs.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/nilfs2.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/newc.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/minix_be.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/minix3_be.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/minix3.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/minix2_be.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/minix.mod’ not found.
    error: file ‘/boot/grub/x86_64-efi/jfs.mod’ not found.

    Question 2: What are these errors (i am not familiar with GRUB yet so apologies on that?
    After these have been displayed it seems to successfully load into Kali Linux.

    I can then see 2 drive partitions on the Desktop, one of which is my persistence partition containing my persistence.conf file.

    I have followed the tutorials for the terminal commands to set up persistence being;
    mkdir -p /mnt/my_usb (and i've tried just usb)
    mount /dev/sdb3/mnt my_usb
    echo "/ union" > /mnt/my_usb/persistence.conf
    umount /dev/sdb3

    I then reboot. I have tried going through the various options in the boot menu to get back to the Kali Linux Desktop, each successfully. However my persistence partition icon is still on the desktop containing my persistence.conf file. I then create a folder on the desktop, reboot and its gone when i return and not saved like it should be.

    Question 3: Having followed all tutorials exactly and having what seems a working USB Live drive (bar those errors in GRUB), where am I going wrong with the persistence?.....or is it something else?

    I thank you in advance for helping me out and i apologise if i have missed anything out or not met any posting requirements. Have a good one









    Attached Images Attached Images

  2. #2
    Join Date
    2018-May
    Posts
    4
    Hi!

    I didn't quite understand how you created the partition for the persistence.
    I enabled the persistance on my live USB and basically what I did is create an unallocated partition behind the the partition that hold the kali system on my USB.
    Then when I booted on the live USB I created the ext4 partition and the persistence conf file.

    As for the grub errors, I might be saying wrong but probably the GRUB you have does not support EFI (personnally I cannot boot on the Kali USB if I'm on secure boot, I have to switch to legacy)

  3. #3
    Join Date
    2018-May
    Posts
    6
    Hi Frodomo, thanks for replying. Its really bizarre.
    Like i said, i seem to have a working Live USB and what seems to be a persistent partition containing a persistence.conf file. I’ve created the live persistence in several different ways previously.
    I’ve created the persistence in disk utilily alongside the Kali partition. I’ve also created it with Gparted whilst in Kali. Two options that are on tutorials.
    When i go through the mount/demount process for dev/sdb3(my persistence partition), it clears the persistence partition disk off the desktop as it should, however when i boot back in its back again.
    Im just wondering if it does indeed have anything to do with those errors or the possible need to switch to legacy which ive never tried.
    What seems to be a pretty simple operation is turning out to be a bit of a bind. Perhaps my Macbook just isn't a fan of the idea of pentesting!

  4. #4
    Join Date
    2018-May
    Posts
    6
    I’ll give it a go on ext4 as well as mine is currently on ext3. I can’t see if it’ll make a difference but other than trying to fix it with a hammer, I’m out of ideas.
    Also does a late 2013 Mac still have legacy mode? I thought it was just UEFI! Not sure how to boot into it that way.
    Thanks again mate.

  5. #5
    Join Date
    2018-Apr
    Posts
    4
    this is my method that works every time unless you make a typo or miss a step

    DOWNLOAD LATEST KALI FROM KALI WEBSITE

    PREP USB OR SD CARD:


    open disk utilities
    hit ERASE
    select GUID + JOURNALED and name it KALI


    when complete


    select main drive (eg skandisk) hit partition


    press the + button and make the new large partition GUID + JOURNALED and name it PERSISTENCE


    press the + button and make the new small partition GUID + JOURNALED and do not name it this will auto give it the label - UNTITLED


    select kali partition and make it FAT32, select persistence partition and make it FAT32
    hit apply


    open mac linux usb app > double click create usb > select downloaded file. hit start


    wait


    once returned complete, goto usb advanced > edit file > add persistence after kali


    reboot into a seperate kali os


    open gparted
    select correct drive
    select persistence partition
    unmount partition
    format to ext3
    label persistence


    boot into live persistence usb


    open terminal
    do
    e2label /dev/sdb3 persistence
    mkdir -p /mnt/my_usb
    mount /dev/sdb3 /mnt/my_usb
    echo “/ union” > /mnt/my_usb/persistence.conf
    umount /dev/sdb3


    update headers


    sudo apt-get install linux-headers-$(uname -r)


    sudo apt-get update && sudo apt-get upgrade


    wait for hours!!!

  6. #6
    Join Date
    2018-May
    Posts
    6
    Thanks @eversor, I’ll give it a go using the steps you suggest. Any difference could make the difference. I appreciate the input

Similar Threads

  1. Macbook Pro Internal Wifi - No Guides Working - Kali Live USB w/ Persistence
    By chiefkilokai in forum Kali Linux TroubleShooting
    Replies: 0
    Last Post: 2018-01-13, 20:48
  2. Persistence on Live USB is only 1/2 working
    By natv in forum Installing Archive
    Replies: 5
    Last Post: 2015-12-19, 09:50

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •