Results 1 to 5 of 5

Thread: Kali ARM, RPI3: Corrupt Disk After apt dist-upgrade

  1. #1
    Join Date
    2014-Sep
    Posts
    8

    Kali ARM, RPI3: Corrupt Disk After apt dist-upgrade

    Hello All,

    I am using an RPi3 with a 7" touchscreen and installing Secure Kali Pi 2018.
    I installed Kali on a Class-10, 8-Gig MicroSD card using Windows.

    I have downloaded "Kali Linux RaspberryPi 2 and 3" from the official site: https://www.offensive-security.com/k...ux-arm-images/

    and formated the SDCard, and installed the package. I then attempted to follow along with the tutorial:https://www.kali.org/tutorials/secure-kali-pi-2018/

    But about 30 minutes into waiting on the update from:
    Code:
    apt dist-upgrade
    the Pi crashes, then reboots only to crash and reboot again.

    I am unsure how to verify if I ran out of room on the SDCard or if the tutorial considers the B+ model only.

    Is there a way to mount this card on my PC and see why it is crashing and eventually find a fix/solution?

  2. #2
    Join Date
    2016-Dec
    Posts
    307
    8Gb sounds a bit short. It may be a possibility that it ran out of space.

  3. #3
    Join Date
    2014-Sep
    Posts
    8
    Quote Originally Posted by Mister_X View Post
    8Gb sounds a bit short. It may be a possibility that it ran out of space.
    64 Gig coming in tomorrow night. Will try again and update the thread.

  4. #4
    Join Date
    2014-Sep
    Posts
    8
    64 Gigs didn't do it... I have the same problem. Shortly after asking me about my keyboard (at about the 50% mark of using the "apt dist-upgrade
    " command) the system crashed and attempts to boot. Same sequence as described above.

    Any way to pull the SDCard, look at the data and see what went wrong??

    I am using the RPi 3B, 64 Gig Class 10 SD Card.

    EDIT: After rebooting several times I see the following upon boot:
    Kali Login: [ 16.758475] EXT4-fs error (device mmcblk0p2: ext4_lookup:1585: inode #27: comm Xorg: deleted inode referenced: 126727)

    I have several errors and one that says bad header. I also can not load startx

    fsck yeilds:
    e2fsck: cannot continue aborting

    The full error can be seen here:
    kaliError.jpg

    Any tips?

  5. #5
    Join Date
    2014-Sep
    Posts
    8
    For those coming across this post..

    Solution posted to:
    https://forums.kali.org/showthread.p...g-dist-upgrade

    While my error was not the same, the above fix provided a solution.
    In short:

    Code:
    pico /etc/fstab
    at the last line add the following:
    Code:
    tmpfs         /boot/firmware tmpfs rw 0 0
    Reboot or run:
    Code:
    mount /boot/firmware
    Then you can update the package, once done to use the new firmware:
    Code:
    cp /usr/lib/raspi3-firmware/* /boot/
    Quote Originally Posted by steev View Post
    There is a workaround, to at least get rid of the error
    Thanks @steev
    Last edited by jameshayek; 3 Weeks Ago at 14:11. Reason: gratitude to Steev

Similar Threads

  1. Kali 2016.2 messed up Desktop after after upgrade/dist-upgrade
    By SpectrE_Fth in forum TroubleShooting Archive
    Replies: 9
    Last Post: 2017-02-13, 10:26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •