Code:
root@Cal1b4n:~# dmesg
[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-04-02
[ 0.000000] Linux version 4.19.0-kali1-amd64 ([email protected]) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1kali1 (2019-01-03)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-kali1-amd64 root=/dev/mapper/Cal1b4n--vg-root ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000954dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000954e0000-0x0000000095ddffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095de0000-0x000000009c6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c6bf000-0x000000009c8befff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009c8bf000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ESRT=0x9ca1f218 ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Acer Aspire V3-572G/EA50_HB , BIOS V1.32 09/15/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.314 MHz processor
[ 0.000123] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000125] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000132] last_pfn = 0x35f600 max_arch_pfn = 0x400000000
[ 0.000136] MTRR default type: uncachable
[ 0.000137] MTRR fixed ranges enabled:
[ 0.000138] 00000-9FFFF write-back
[ 0.000139] A0000-BFFFF uncachable
[ 0.000140] C0000-E7FFF write-protect
[ 0.000140] E8000-EFFFF write-combining
[ 0.000141] F0000-FFFFF write-protect
[ 0.000142] MTRR variable ranges enabled:
[ 0.000143] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000144] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000145] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000145] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000146] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000147] 5 disabled
[ 0.000147] 6 disabled
[ 0.000147] 7 disabled
[ 0.000148] 8 disabled
[ 0.000148] 9 disabled
[ 0.000963] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001085] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.001090] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.013655] esrt: Reserving ESRT space from 0x000000009ca1f218 to 0x000000009ca1f250.
[ 0.013663] Base memory trampoline at [(____ptrval____)] 7e000 size 24576
[ 0.013666] Using GB pages for direct mapping
[ 0.013668] BRK [0x270201000, 0x270201fff] PGTABLE
[ 0.013669] BRK [0x270202000, 0x270202fff] PGTABLE
[ 0.013670] BRK [0x270203000, 0x270203fff] PGTABLE
[ 0.013712] BRK [0x270204000, 0x270204fff] PGTABLE
[ 0.013714] BRK [0x270205000, 0x270205fff] PGTABLE
[ 0.013917] BRK [0x270206000, 0x270206fff] PGTABLE
[ 0.013964] BRK [0x270207000, 0x270207fff] PGTABLE
[ 0.014029] BRK [0x270208000, 0x270208fff] PGTABLE
[ 0.014115] BRK [0x270209000, 0x270209fff] PGTABLE
[ 0.014180] BRK [0x27020a000, 0x27020afff] PGTABLE
[ 0.014250] RAMDISK: [mem 0x33a8b000-0x35d3cfff]
[ 0.014257] ACPI: Early table checksum verification disabled
[ 0.014259] ACPI: RSDP 0x000000009CFFE014 000024 (v02 ACRSYS)
[ 0.014263] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.014268] ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014273] ACPI: DSDT 0x000000009CFE4000 010C73 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.014276] ACPI: FACS 0x000000009CFB9000 000040
[ 0.014278] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014281] ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014284] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014286] ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014289] ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014292] ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014294] ACPI: SSDT 0x000000009CFE1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014297] ACPI: BOOT 0x000000009CFDF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014300] ACPI: LPIT 0x000000009CFDE000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.014302] ACPI: ASPT 0x000000009CFDC000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014305] ACPI: DBGP 0x000000009CFDB000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014308] ACPI: SSDT 0x000000009CFDA000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.014310] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.014313] ACPI: SSDT 0x000000009CFD5000 003B8C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.014316] ACPI: SSDT 0x000000009CFD0000 002CFB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.014318] ACPI: CSRT 0x000000009CFD3000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014321] ACPI: BGRT 0x000000009CFD4000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.014328] ACPI: Local APIC address 0xfee00000
[ 0.014406] No NUMA configuration found
[ 0.014406] Faking a node at [mem 0x0000000000000000-0x000000035f5fffff]
[ 0.014410] NODE_DATA(0) allocated [mem 0x35f5fb000-0x35f5fffff]
[ 0.014437] Zone ranges:
[ 0.014438] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014439] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014440] Normal [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.014441] Device empty
[ 0.014442] Movable zone start for each node
[ 0.014443] Early memory node ranges
[ 0.014443] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.014444] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.014445] node 0: [mem 0x0000000000100000-0x00000000954dffff]
[ 0.014445] node 0: [mem 0x0000000095de0000-0x000000009c6befff]
[ 0.014446] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.014447] node 0: [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.014450] Reserved but unavailable: 99 pages
[ 0.014451] Initmem setup node 0 [mem 0x0000000000001000-0x000000035f5fffff]
[ 0.014452] On node 0 totalpages: 3126086
[ 0.014453] DMA zone: 64 pages used for memmap
[ 0.014454] DMA zone: 22 pages reserved
[ 0.014455] DMA zone: 3974 pages, LIFO batch:0
[ 0.014976] DMA32 zone: 9911 pages used for memmap
[ 0.014976] DMA32 zone: 634304 pages, LIFO batch:63
[ 0.031439] Normal zone: 38872 pages used for memmap
[ 0.031441] Normal zone: 2487808 pages, LIFO batch:63
[ 0.087568] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[ 0.087646] ACPI: PM-Timer IO Port: 0x1808
[ 0.087648] ACPI: Local APIC address 0xfee00000
[ 0.087664] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.087666] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.087667] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.087668] ACPI: IRQ0 used by override.
[ 0.087669] ACPI: IRQ9 used by override.
[ 0.087671] Using ACPI (MADT) for SMP configuration information
[ 0.087672] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.087682] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.087703] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.087704] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.087706] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.087706] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.087708] PM: Registered nosave memory: [mem 0x954e0000-0x95ddffff]
[ 0.087709] PM: Registered nosave memory: [mem 0x9c6bf000-0x9c8befff]
[ 0.087710] PM: Registered nosave memory: [mem 0x9c8bf000-0x9cebefff]
[ 0.087711] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.087711] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.087713] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.087713] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.087714] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.087714] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.087715] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.087715] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.087716] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.087716] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.087717] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.087717] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.087718] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.087718] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.087719] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.087721] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.087722] Booting paravirtualized kernel on bare hardware
[ 0.087724] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.188320] random: get_random_bytes called from start_kernel+0x93/0x537 with crng_init=0
[ 0.188328] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.188577] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u262144
[ 0.188585] pcpu-alloc: s143192 r8192 d28840 u262144 alloc=1*2097152
[ 0.188586] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.188610] Built 1 zonelists, mobility grouping on. Total pages: 3077217
[ 0.188610] Policy zone: Normal
[ 0.188612] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-kali1-amd64 root=/dev/mapper/Cal1b4n--vg-root ro quiet
[ 0.192479] Calgary: detecting Calgary via BIOS EBDA area
[ 0.192481] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.224452] Memory: 12114720K/12504344K available (10252K kernel code, 1235K rwdata, 3200K rodata, 1572K init, 2332K bss, 389624K reserved, 0K cma-reserved)
[ 0.224548] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.224553] Kernel/User page tables isolation: enabled
[ 0.232747] ftrace: allocating 31610 entries in 124 pages
[ 0.246186] rcu: Hierarchical RCU implementation.
[ 0.246187] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.246188] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.248976] NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16
[ 0.249179] Console: colour dummy device 80x25
[ 0.249183] console [tty0] enabled
[ 0.249200] ACPI: Core revision 20180810
[ 0.249448] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.249455] hpet clockevent registered
[ 0.249459] APIC: Switch to symmetric I/O mode setup
[ 0.250035] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.269460] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22833c25bbc, max_idle_ns: 440795314198 ns
[ 0.269472] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.62 BogoMIPS (lpj=9577256)
[ 0.269475] pid_max: default: 32768 minimum: 301
[ 0.274310] Security Framework initialized
[ 0.274312] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.277475] AppArmor: AppArmor initialized
[ 0.279640] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.280763] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.280809] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.280844] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.281048] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.281049] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.281054] mce: CPU supports 7 MCE banks
[ 0.281063] CPU0: Thermal monitoring enabled (TM1)
[ 0.281074] process: using mwait in idle threads
[ 0.281077] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.281077] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.281079] Spectre V2 : Mitigation: Full generic retpoline
[ 0.281079] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.281080] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.281087] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.281087] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.281088] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.285037] Freeing SMP alternatives memory: 24K
[ 0.291294] TSC deadline timer enabled
[ 0.291297] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.291381] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.291432] ... version: 3
[ 0.291433] ... bit width: 48
[ 0.291433] ... generic registers: 4
[ 0.291434] ... value mask: 0000ffffffffffff
[ 0.291435] ... max period: 00007fffffffffff
[ 0.291435] ... fixed-purpose events: 3
[ 0.291436] ... event mask: 000000070000000f
[ 0.291468] rcu: Hierarchical SRCU implementation.
[ 0.292365] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.292426] smp: Bringing up secondary CPUs ...
[ 0.292488] x86: Booting SMP configuration:
[ 0.292490] .... node #0, CPUs: #1 #2 #3
[ 0.293862] smp: Brought up 1 node, 4 CPUs
[ 0.293862] smpboot: Max logical packages: 2
[ 0.293862] smpboot: Total of 4 processors activated (19154.51 BogoMIPS)
[ 0.297753] devtmpfs: initialized
[ 0.297753] x86/mm: Memory block size: 128MB
[ 0.298368] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.298368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.298368] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.298368] pinctrl core: initialized pinctrl subsystem
[ 0.298368] NET: Registered protocol family 16
[ 0.298368] audit: initializing netlink subsys (disabled)
[ 0.298368] audit: type=2000 audit(1547329440.048:1): state=initialized audit_enabled=0 res=1
[ 0.298368] cpuidle: using governor ladder
[ 0.298368] cpuidle: using governor menu
[ 0.298368] Simple Boot Flag at 0x44 set to 0x1
[ 0.298368] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.298368] ACPI: bus type PCI registered
[ 0.298368] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.298368] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298368] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.298368] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.298368] PCI: Using configuration type 1 for base access
[ 0.298368] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.298368] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.298368] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.298368] ACPI: Added _OSI(Module Device)
[ 0.298368] ACPI: Added _OSI(Processor Device)
[ 0.298368] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.298368] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.298368] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.298368] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.312878] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.316309] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.317798] ACPI: Dynamic OEM Table Load:
[ 0.317805] ACPI: SSDT 0xFFFF8C2990E1B000 000465 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.318249] ACPI: Dynamic OEM Table Load:
[ 0.318255] ACPI: SSDT 0xFFFF8C2990E19800 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.318724] ACPI: Dynamic OEM Table Load:
[ 0.318729] ACPI: SSDT 0xFFFF8C2990F5CA00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.319690] ACPI: EC: EC started
[ 0.319691] ACPI: EC: interrupt blocked
[ 0.365481] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.365483] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.365484] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.365485] ACPI: Interpreter enabled
[ 0.365518] ACPI: (supports S0 S3 S4 S5)
[ 0.365519] ACPI: Using IOAPIC for interrupt routing
[ 0.365542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.365865] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.398490] ACPI: Power Resource [NVP3] (on)
[ 0.398513] ACPI: Power Resource [NVP2] (on)
[ 0.406950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.406955] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.407260] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.407261] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.407743] PCI host bridge to bus 0000:00
[ 0.407745] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.407747] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.407748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.407750] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.407751] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.407752] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.407753] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.407755] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.407756] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.407757] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.407758] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.407760] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.407761] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.407762] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.407763] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.407765] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.407766] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.407768] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.407776] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.407951] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.407962] pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit]
[ 0.407969] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.407973] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.407985] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.408153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.408163] pci 0000:00:03.0: reg 0x10: [mem 0xb3610000-0xb3613fff 64bit]
[ 0.408345] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.408363] pci 0000:00:14.0: reg 0x10: [mem 0xb3600000-0xb360ffff 64bit]
[ 0.408415] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.408566] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.408587] pci 0000:00:16.0: reg 0x10: [mem 0xb3618000-0xb361801f 64bit]
[ 0.408649] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.408805] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.408822] pci 0000:00:1b.0: reg 0x10: [mem 0xb3614000-0xb3617fff 64bit]
[ 0.408882] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.409031] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.409096] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.409285] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.409350] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.409508] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.409572] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.409732] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.409752] pci 0000:00:1d.0: reg 0x10: [mem 0xb361c000-0xb361c3ff]
[ 0.409830] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.409985] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.410236] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.410250] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.410256] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.410262] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.410268] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.410274] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.410281] pci 0000:00:1f.2: reg 0x24: [mem 0xb361b000-0xb361b7ff]
[ 0.410311] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.410456] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.410471] pci 0000:00:1f.3: reg 0x10: [mem 0xb3619000-0xb36190ff 64bit]
[ 0.410489] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.410702] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.410732] pci 0000:01:00.0: reg 0x10: [mem 0xb3505000-0xb3505fff]
[ 0.410792] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.410876] pci 0000:01:00.0: supports D1 D2
[ 0.410877] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.410975] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
[ 0.411003] pci 0000:01:00.1: reg 0x10: [io 0x4000-0x40ff]
[ 0.411029] pci 0000:01:00.1: reg 0x18: [mem 0xb3504000-0xb3504fff 64bit]
[ 0.411046] pci 0000:01:00.1: reg 0x20: [mem 0xb3500000-0xb3503fff 64bit]
[ 0.411134] pci 0000:01:00.1: supports D1 D2
[ 0.411136] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.411262] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.411265] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.411268] pci 0000:00:1c.0: bridge window [mem 0xb3500000-0xb35fffff]
[ 0.411349] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[ 0.411384] pci 0000:02:00.0: reg 0x10: [mem 0xb3400000-0xb3403fff 64bit]
[ 0.411443] pci 0000:02:00.0: enabling Extended Tags
[ 0.411519] pci 0000:02:00.0: supports D1 D2
[ 0.411520] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.411624] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.411628] pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
[ 0.411681] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
[ 0.411705] pci 0000:03:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
[ 0.411718] pci 0000:03:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.411731] pci 0000:03:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.411740] pci 0000:03:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.411749] pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.411836] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 0.411918] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.411921] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.411924] pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
[ 0.411928] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.419548] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419591] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419675] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419716] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.419842] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420089] ACPI: EC: interrupt unblocked
[ 0.420097] ACPI: EC: event unblocked
[ 0.420104] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.420105] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.420169] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.420169] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.420169] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.420169] vgaarb: loaded
[ 0.459699] pps_core: LinuxPPS API ver. 1 registered
[ 0.459700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.459703] PTP clock support registered
[ 0.459710] EDAC MC: Ver: 3.0.0
[ 0.459803] Registered efivars operations
[ 0.489797] PCI: Using ACPI for IRQ routing
[ 0.497671] PCI: pci_cache_line_size set to 64 bytes
[ 0.497745] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.497747] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.497748] e820: reserve RAM buffer [mem 0x954e0000-0x97ffffff]
[ 0.497749] e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff]
[ 0.497750] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.497751] e820: reserve RAM buffer [mem 0x35f600000-0x35fffffff]
[ 0.497853] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.497853] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.499774] clocksource: Switched to clocksource tsc-early
[ 0.506072] VFS: Disk quotas dquot_6.6.0
[ 0.506087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.506184] AppArmor: AppArmor Filesystem Enabled
[ 0.506199] pnp: PnP ACPI init
[ 0.506364] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.506366] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.506367] system 00:00: [io 0xffff] has been reserved
[ 0.506369] system 00:00: [io 0xffff] has been reserved
[ 0.506370] system 00:00: [io 0xffff] has been reserved
[ 0.506372] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.506373] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.506378] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.506415] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.506457] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.506460] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.506483] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.513611] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.513614] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.513616] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.513617] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.513619] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.513621] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.513622] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.513624] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[ 0.513625] system 00:04: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.513627] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.513629] system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.513630] system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.513634] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513894] system 00:05: [mem 0xb361f000-0xb361ffff] has been reserved
[ 0.513895] system 00:05: [mem 0xb361d000-0xb361dfff] has been reserved
[ 0.513899] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514526] pnp: PnP ACPI: found 6 devices
[ 0.520119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.520123] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.520125] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.520147] pci 0000:01:00.0: BAR 6: assigned [mem 0xb3510000-0xb351ffff pref]
[ 0.520150] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.520152] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.520156] pci 0000:00:1c.0: bridge window [mem 0xb3500000-0xb35fffff]
[ 0.520162] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.520166] pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
[ 0.520173] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.520175] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.520176] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.520178] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.520181] pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
[ 0.520184] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.520190] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.520191] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.520192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.520194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.520195] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.520196] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.520198] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.520199] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.520201] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.520202] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.520203] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.520205] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.520206] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.520207] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.520209] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.520210] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.520211] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 0.520213] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.520214] pci_bus 0000:01: resource 1 [mem 0xb3500000-0xb35fffff]
[ 0.520216] pci_bus 0000:02: resource 1 [mem 0xb3400000-0xb34fffff]
[ 0.520217] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.520219] pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb2ffffff]
[ 0.520220] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.520344] NET: Registered protocol family 2
[ 0.520479] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.520526] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.520788] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.520827] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.520866] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.520942] NET: Registered protocol family 1
[ 0.520956] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.545557] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c3 took 19290 usecs
[ 0.545611] PCI: CLS 64 bytes, default 64
[ 0.545645] Unpacking initramfs...
[ 1.058255] Freeing initrd memory: 35528K
[ 1.058258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.058261] software IO TLB: mapped [mem 0x8edf0000-0x92df0000] (64MB)
[ 1.058859] Initialise system trusted keyrings
[ 1.058900] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.059977] zbud: loaded
[ 1.060214] pstore: using deflate compression
[ 1.471268] Key type asymmetric registered
[ 1.471269] Asymmetric key parser 'x509' registered
[ 1.471277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.471304] io scheduler noop registered
[ 1.471304] io scheduler deadline registered
[ 1.471332] io scheduler cfq registered (default)
[ 1.471333] io scheduler mq-deadline registered
[ 1.471894] pcieport 0000:00:1c.0: Signaling PME with IRQ 40
[ 1.471911] pcieport 0000:00:1c.3: Signaling PME with IRQ 41
[ 1.471926] pcieport 0000:00:1c.4: Signaling PME with IRQ 42
[ 1.471947] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.471964] efifb: probing for efifb
[ 1.471981] efifb: framebuffer at 0xc0000000, using 4160k, total 4160k
[ 1.471982] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.471982] efifb: scrolling: redraw
[ 1.471984] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.474075] Console: switching to colour frame buffer device 170x48
[ 1.476030] fb0: EFI VGA frame buffer device
[ 1.476039] intel_idle: MWAIT substates: 0x11142120
[ 1.476039] intel_idle: v0.4.1 model 0x45
[ 1.476240] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.476523] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.476934] Linux agpgart interface v0.103
[ 1.476977] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.476977] AMD IOMMUv2 functionality not available on this system
[ 1.477219] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 1.477220] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.482815] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.482910] mousedev: PS/2 mouse device common for all mice
[ 1.482941] rtc_cmos 00:01: RTC can wake from S4
[ 1.483082] rtc_cmos 00:01: registered as rtc0
[ 1.483094] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.483104] intel_pstate: Intel P-state driver initializing
[ 1.483317] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.484209] NET: Registered protocol family 10
[ 1.493410] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.494395] Segment Routing with IPv6
[ 1.494413] mip6: Mobile IPv6
[ 1.494415] NET: Registered protocol family 17
[ 1.494420] mpls_gso: MPLS GSO support
[ 1.494777] microcode: sig=0x40651, pf=0x40, revision=0x24
[ 1.494877] microcode: Microcode Update Driver: v2.2.
[ 1.494912] sched_clock: Marking stable (1494567529, 304778)->(1509152859, -14280552)
[ 1.495078] registered taskstats version 1
[ 1.495079] Loading compiled-in X.509 certificates
[ 1.531326] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 1.531340] zswap: loaded using pool lzo/zbud
[ 1.531429] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.531862] rtc_cmos 00:01: setting system clock to 2019-01-12 21:44:01 UTC (1547329441)
[ 1.769507] Freeing unused kernel image memory: 1572K
[ 1.789547] Write protecting the kernel read-only data: 16384k
[ 1.791192] Freeing unused kernel image memory: 2028K
[ 1.791464] Freeing unused kernel image memory: 896K
[ 1.801697] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.801699] x86/mm: Checking user space page tables
[ 1.809295] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.809297] Run /init as init process
[ 1.918491] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.932570] ACPI: bus type USB registered
[ 1.932598] usbcore: registered new interface driver usbfs
[ 1.932608] usbcore: registered new interface driver hub
[ 1.932640] usbcore: registered new device driver usb
[ 1.934071] SCSI subsystem initialized
[ 1.934378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.934525] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.934551] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.937211] ehci-pci: EHCI PCI platform driver
[ 1.937382] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.937389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.937401] ehci-pci 0000:00:1d.0: debug port 2
[ 1.937540] i2c_hid i2c-SYN1B7E:01: i2c-SYN1B7E:01 supply vdd not found, using dummy regulator
[ 1.937555] i2c_hid i2c-SYN1B7E:01: Linked as a consumer to regulator.0
[ 1.937557] i2c_hid i2c-SYN1B7E:01: i2c-SYN1B7E:01 supply vddl not found, using dummy regulator
[ 1.941316] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.941338] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb361c000
[ 1.942908] libata version 3.00 loaded.
[ 1.944581] ahci 0000:00:1f.2: version 3.0
[ 1.944800] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.945308] cryptd: max_cpu_qlen set to 1000
[ 1.953478] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.953534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.953536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.953538] usb usb1: Product: EHCI Host Controller
[ 1.953540] usb usb1: Manufacturer: Linux 4.19.0-kali1-amd64 ehci_hcd
[ 1.953542] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.953678] hub 1-0:1.0: USB hub found
[ 1.953686] hub 1-0:1.0: 2 ports detected
[ 1.953872] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.953889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.954197] random: fast init done
[ 1.954711] AVX2 version of gcm_enc/dec engaged.
[ 1.954712] AES CTR mode by8 optimization enabled
[ 1.954879] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.954883] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.954964] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 1.954969] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.955677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.955680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.955682] usb usb2: Product: xHCI Host Controller
[ 1.955684] usb usb2: Manufacturer: Linux 4.19.0-kali1-amd64 xhci-hcd
[ 1.955686] usb usb2: SerialNumber: 0000:00:14.0
[ 1.955842] scsi host0: ahci
[ 1.956254] hub 2-0:1.0: USB hub found
[ 1.956409] hub 2-0:1.0: 9 ports detected
[ 1.963372] libphy: r8169: probed
[ 1.963697] r8169 0000:01:00.1 eth0: RTL8411, f0:76:1c:39:7f:bd, XID 5c800800, IRQ 45
[ 1.963700] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.963904] scsi host1: ahci
[ 1.965759] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.965766] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.965772] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.965914] scsi host2: ahci
[ 1.965962] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.965965] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.965967] usb usb3: Product: xHCI Host Controller
[ 1.965969] usb usb3: Manufacturer: Linux 4.19.0-kali1-amd64 xhci-hcd
[ 1.965971] usb usb3: SerialNumber: 0000:00:14.0
[ 1.966259] hub 3-0:1.0: USB hub found
[ 1.966273] hub 3-0:1.0: 4 ports detected
[ 1.966282] scsi host3: ahci
[ 1.966361] ata1: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b100 irq 44
[ 1.966363] ata2: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b180 irq 44
[ 1.966364] ata3: DUMMY
[ 1.966365] ata4: DUMMY
[ 1.969148] input: SYN1B7E:01 06CB:2970 Mouse as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input1
[ 1.969234] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input2
[ 1.969305] hid-generic 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[ 1.981367] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 2.073561] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[ 2.073592] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
[ 2.073656] clocksource: Switched to clocksource tsc
[ 2.280911] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.282069] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 2.282074] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.283358] ata1.00: configured for UDMA/133
[ 2.283836] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[ 2.289561] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.293563] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 2.444542] usb 2-5: New USB device found, idVendor=0489, idProduct=e046, bcdDevice= 1.12
[ 2.444549] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.444553] usb 2-5: Product: BCM20702A0
[ 2.444557] usb 2-5: Manufacturer: Broadcom Corp
[ 2.444560] usb 2-5: SerialNumber: B01041F916EE
[ 2.446228] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[ 2.446235] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.446667] hub 1-1:1.0: USB hub found
[ 2.447461] hub 1-1:1.0: 8 ports detected
[ 2.573563] usb 2-7: new high-speed USB device number 3 using xhci_hcd
[ 2.596922] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.600244] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[ 2.607493] ata2.00: configured for UDMA/100
[ 2.616485] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
[ 2.657568] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.657576] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.657597] sd 0:0:0:0: [sda] Write Protect is off
[ 2.657603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.657626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.697255] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.697260] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.697698] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.760303] sda: sda1 sda2 sda3
[ 2.760811] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.779351] usb 2-7: New USB device found, idVendor=04f2, idProduct=b452, bcdDevice=29.69
[ 2.779355] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.779358] usb 2-7: Product: HD WebCam
[ 2.779360] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.779363] usb 2-7: SerialNumber: 0001
[ 3.254228] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.336527] device-mapper: uevent: version 1.0.3
[ 3.336649] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
[ 13.947877] random: crng init done
[ 20.867134] NET: Registered protocol family 38
[ 22.001405] PM: Image not found (code -22)
[ 22.271165] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.048423] systemd[1]: Inserted module 'autofs4'
[ 24.439058] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 24.457701] systemd[1]: Detected architecture x86-64.
[ 24.481808] systemd[1]: Set hostname to <Cal1b4n>.
[ 27.394558] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 27.397714] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 27.398204] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 27.398348] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 27.398652] systemd[1]: Listening on Journal Socket.
[ 27.400192] systemd[1]: Mounting POSIX Message Queue File System...
[ 27.401014] systemd[1]: Mounting Huge Pages File System...
[ 27.659597] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 27.928231] systemd-journald[354]: Received request to flush runtime journal from PID 1
[ 29.173861] EFI Variables Facility v0.08 2004-May-17
[ 29.185983] ACPI: AC Adapter [ACAD] (off-line)
[ 29.199226] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[ 29.199238] ACPI: Lid Switch [LID0]
[ 29.199307] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input5
[ 29.199318] ACPI: Power Button [PWRB]
[ 29.199371] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input6
[ 29.199381] ACPI: Sleep Button [SLPB]
[ 29.199481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 29.199498] ACPI: Power Button [PWRF]
[ 29.229577] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 29.261588] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 29.372713] pstore: Registered efi as persistent store backend
[ 29.377918] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 29.377921] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 29.377922] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 29.377923] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 29.425517] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input10
[ 29.425709] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[ 29.445882] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 29.445884] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 29.445885] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 29.445885] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 29.445886] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 29.629714] iTCO_vendor_support: vendor-support=0
[ 29.674782] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 29.674849] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 29.675008] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.920378] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.921107] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.065859] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 30.065928] acer_wmi: Function bitmap for Communication Button: 0x801
[ 30.073384] input: Acer WMI hotkeys as /devices/virtual/input/input12
[ 30.212160] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
[ 30.212186] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[ 30.212206] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[ 30.212243] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[ 30.212263] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[ 30.226607] bcma: bus0: Bus registered
[ 30.573528] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[ 30.573530] fb: switching to inteldrmfb from EFI VGA
[ 30.573562] Console: switching to colour dummy device 80x25
[ 30.573654] [drm] Replacing VGA console driver
[ 30.574752] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 30.574753] [drm] Driver supports precise vblank timestamp query.
[ 30.575144] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 30.679306] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 30.679494] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 30.679970] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 30.679975] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20180810/psargs-330)
[ 30.679984] ACPI Error: Method parse/execution failed \_SB.PCI0.RP05.PEGP.DD02._BCL, AE_NOT_FOUND (20180810/psparse-516)
[ 30.680032] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input13
[ 30.681446] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 30.681841] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[ 30.682016] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 30.713729] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180810/nsarguments-66)
[ 30.713917] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 30.713944] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180810/nsarguments-66)
[ 30.714093] pci 0000:03:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 30.714095] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
[ 30.714096] nouveau: detected PR support, will not use DSM
[ 30.714121] nouveau 0000:03:00.0: enabling device (0006 -> 0007)
[ 30.714269] nouveau 0000:03:00.0: NVIDIA GM108 (118010a2)
[ 30.725802] nouveau 0000:03:00.0: bios: version 82.08.15.00.2c
[ 30.731828] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 30.731832] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.731835] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 30.731836] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 30.731838] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 30.731840] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 30.739786] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 30.739845] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 30.745191] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 30.745641] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 30.745703] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 30.782615] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 30.810153] nouveau 0000:03:00.0: fb: 2048 MiB DDR3
[ 30.810169] nouveau 0000:03:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 30.824440] nouveau 0000:03:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[ 30.879429] fbcon: inteldrmfb (fb0) is primary device
[ 30.899975] media: Linux media interface: v0.10
[ 30.917667] videodev: Linux video capture interface: v2.00
[ 31.185640] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
[ 31.187131] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[ 31.187814] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[ 31.187825] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[ 31.188346] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 31.194931] Bluetooth: Core ver 2.22
[ 31.194944] NET: Registered protocol family 31
[ 31.194945] Bluetooth: HCI device and connection manager initialized
[ 31.194947] Bluetooth: HCI socket layer initialized
[ 31.194950] Bluetooth: L2CAP socket layer initialized
[ 31.194955] Bluetooth: SCO socket layer initialized
[ 31.198332] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 31.198333] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 31.198335] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 31.198393] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
[ 31.198441] usbcore: registered new interface driver uvcvideo
[ 31.198442] USB Video Class driver (1.1.1)
[ 31.582651] intel_rapl: Found RAPL domain package
[ 31.582652] intel_rapl: Found RAPL domain core
[ 31.582653] intel_rapl: Found RAPL domain uncore
[ 31.582655] intel_rapl: Found RAPL domain dram
[ 31.582657] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 31.618540] b43 bcma0:1: firmware: direct-loading firmware b43/ucode30_mimo.fw
[ 31.644439] b43 bcma0:1: firmware: direct-loading firmware b43/n16initvals30.fw
[ 31.644564] b43 bcma0:1: firmware: direct-loading firmware b43/n16bsinitvals30.fw
[ 31.682539] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 31.814845] usbcore: registered new interface driver btusb
[ 31.927748] Bluetooth: hci0: BCM: chip id 63
[ 31.928747] Bluetooth: hci0: BCM: features 0x07
[ 31.944760] Bluetooth: hci0: Broadcom Bluetooth Device
[ 31.945752] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1465
[ 32.009890] Console: switching to colour frame buffer device 170x48
[ 32.027393] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 32.103767] vga_switcheroo: enabled
[ 32.103823] [TTM] Zone kernel: Available graphics memory: 6109768 kiB
[ 32.103825] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 32.103825] [TTM] Initializing pool allocator
[ 32.103829] [TTM] Initializing DMA pool allocator
[ 32.103847] nouveau 0000:03:00.0: DRM: VRAM: 2048 MiB
[ 32.103848] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
[ 32.103852] nouveau 0000:03:00.0: DRM: Pointer to TMDS table invalid
[ 32.103880] nouveau 0000:03:00.0: DRM: DCB version 4.0
[ 32.104682] nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
[ 32.104692] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 1
[ 32.126040] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0489-e046.hcd
[ 32.871836] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1465
[ 32.887828] Bluetooth: hci0: Broadcom Bluetooth Device
[ 33.404500] Adding 12505084k swap on /dev/mapper/Cal1b4n--vg-swap_1. Priority:-2 extents:1 across:12505084k FS
[ 33.821647] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 33.857720] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 42.831874] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.866227] r8169 0000:01:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[ 42.866440] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 42.975935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.983095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.141613] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 43.318188] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.537612] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 43.701581] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.369015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.105638] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 47.273629] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.607354] nouveau 0000:03:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 49.703778] wlan0: authenticate with ac:84:c6:1e:c3:c4
[ 49.825779] wlan0: send auth to ac:84:c6:1e:c3:c4 (try 1/3)
[ 49.827542] wlan0: authenticated
[ 49.829511] wlan0: associate with ac:84:c6:1e:c3:c4 (try 1/3)
[ 49.838333] wlan0: RX AssocResp from ac:84:c6:1e:c3:c4 (capab=0x411 status=0 aid=1)
[ 49.838767] wlan0: associated
[ 49.972524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.864192] nouveau 0000:03:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 86.482640] fuse init (API version 7.27)
[ 91.557558] rfkill: input handler disabled