Results 1 to 45 of 45

Thread: Gemini pda mon mode

  1. #1
    Join Date
    2019-Jan
    Posts
    124

    Gemini pda mon mode

    how do i enable monitor mode on external addapters?it defifinaly can see my atheros ones. about half he rlt***s they show up under lsub . and shows wlan1. but airmon strt stop doesnt work. if down up no luck. is there a dpkg or some other step

  2. #2
    Join Date
    2019-Jan
    Posts
    124
    Quote Originally Posted by nikmel420 View Post
    how do i enable monitor mode on external addapters?it defifinaly can see my atheros ones. about half he rlt***s they show up under lsub . and shows wlan1. but airmon strt stop doesnt work. if down up no luck. is there a dpkg or some other step
    the error says;;
    ethotool failed
    only mac80211 devices on kernel or higher supported(rt5370)

  3. #3
    Join Date
    2016-Dec
    Posts
    806
    Any error when running airmon-ng start/stop? If yes, what is the EXACT error. Saying something doesn't work isn't useful as there can be thousands of reasons why. When you make a statement like that, you have to give details.

  4. #4
    Join Date
    2019-Jan
    Posts
    124
    Sorry i thoght i went back and eddited this. When I run airmon I get
    Ethtool failed....
    Only Mac 80211devices on kernel 2.6.33 or higher are officially supported by airmon.
    Doing if down I get
    Error for wireless request "set mode" (8B06)
    SET failed on device slang , operationnot supported.
    I think it might be getting worked on in github

  5. #5
    Join Date
    2016-Dec
    Posts
    806
    Install ethtool then re-run airmon-ng: apt install ethotool.

    Only Mac 80211devices on kernel 2.6.33 or higher are officially supported by airmon.
    That is incorrect.

  6. #6
    Join Date
    2019-Jan
    Posts
    124
    Quote Originally Posted by Mister_X View Post
    Install ethtool then re-run airmon-ng: apt install ethotool.



    That is incorrect.
    nope it said i had curent ethtool. same errors exept now it it throws in
    error adding monitor mode interface: comand failed: operation not suported (-95)
    i tried on both sides becuase the c ports are different. same result

  7. #7
    Join Date
    2016-Dec
    Posts
    806
    could you show the whole result from airmon-ng when it fails. Partially showing the error is useless, the whole thing is needed.

  8. #8
    Join Date
    2019-Jan
    Posts
    124
    pixlr_20190226002217740.jpgpixlr_20190226002322061.jpgyea probably a million ways I could of did that better. after that small patch yesterday it shows wlan1 now. so re4sons almost got it. I found a nethunter for the gemini so had a thought maybe on both boots something will work but no and androidbis crazy buggy. so eent back to just a full kali gemini. so took kali off gpd pocket. and put parrot on it. so one distro in each pocket. sorry off topic. I'm thinking gonna be an update that gets mon going .

  9. #9
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Try this:

    sudo ip link set wlan1 down && sudo iw dev wlan1 set type monitor && sudo ip link set wlan1 up

    That's been working with all my ath and rtl adapters. Works the same in NetHunter.

    wlan1.jpg
    Somehow my uploads shrink. Try this link instead:

    https://re4son-kernel.com/wp-content/uploads/wlan1.png


    Please give that a try and let us know how you go.

  10. #10
    Join Date
    2019-Jan
    Posts
    124
    t@kali:~# sudo ip link set wlan1 down && sudo iw dev wlan1 set type monitor && sudo ip link set wlan1 up
    RTNETLINK answers: Resource temporarily unavailable
    root@kali:~# ip link show wlan1
    100: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ieee802.11/radiotap 08:da:35:df:6a:8c brd ff:ff:ff:ff:ff:ff
    root@kali:~# sudo ip link set wlan1 down && sudo iw dev wlan1 set type monitor && sudo ip link set wlan1 up
    RTNETLINK answers: Resource temporarily unavailable
    root@kali:~# airmon-ng start wlan1


    Found phy0 with no interfaces assigned, would you like to assign one to it? [y/n] n
    PHY phy0 will remain lost.


    Found phy1 with no interfaces assigned, would you like to assign one to it? [y/n] y


    ERROR adding monitor mode interface: command failed: Operation not supported (-95)


    PHY Interface Driver Chipset


    ethtool failed...
    Only mac80211 devices on kernel 2.6.33 or higher are officially supported by airmon-ng.
    root@kali:~# monitor && sudo ip link set wlan1 up
    bash: monitor: command not found
    root@kali:~# RTNETLINK answers: Resource temporarily unavailable
    bash: RTNETLINK: command not found
    root@kali:~# root@kali:~# ip link show wlan1
    bash: root@kali:~#: command not found
    root@kali:~# 100: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    bash: BROADCAST,MULTICAST: No such file or directory
    root@kali:~# link/ieee802.11/radiotap 08:da:35:df:6a:8c brd ff:ff:ff:ff:ff:ff
    bash: link/ieee802.11/radiotap: No such file or directory
    root@kali:~# root@kali:~# sudo ip link set wlan1 down && sudo iw dev wlan1 set type monitor && sudo ip link set wlanp
    bash: root@kali:~#: command not found
    root@kali:~# RTNETLINK answers: Resource temporarily unavailable
    bash: RTNETLINK: command not found

  11. #11
    Join Date
    2019-Jan
    Posts
    124
    ot@kali:~# sudo ip link set wlan1 down && sudo iw dev wlan1 set type monitor && sudo ip link set wlan1 up
    root@kali:~# ip link show wlan1101: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN mode DEFAULT group default qlen 1000
    link/ieee802.11/radiotap 00:11:7f:1a:fb:1e brd ff:ff:ff:ff:ff:ff
    root@kali:~# iwconfig
    Warning: Driver for device ccmni7 has been compiled with an ancient version
    of Wireless Extension, while this program support version 11 and later.
    Some things may be broken...


    ccmni7 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: Not-Associated Bit Rate:0 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni2 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni11 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    sit0 no wireless extensions.


    ccmni13 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222822 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    lo no wireless extensions.


    ccmni15 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222822 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni17 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni8 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni3 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    wlan1 no wireless extensions.


    ifb1 no wireless extensions.


    cc3mni0 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222822 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    rndis0 no wireless extensions.


    cc3mni2 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222818 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    cc3mni4 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    wlan0 IEEE 802.11bgn Mode:Managed Frequency:2.462 GHz
    Access Point: 00:13:37:A7:11:43 Bit Rate:72 Mb/s Tx-Power=off
    RTS thr=0 B Fragment thrff
    Encryption keyff
    Power Managementff
    Link Quality:0/100 Signal level:-25 dBm Noise level:0 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0


    cc3mni6 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: 00:00:01:01:02:00 Bit Rate=2.346 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementff

    ccmni9 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni4 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ip6tnl0 no wireless extensions.


    ifb0 no wireless extensions.


    ccmni10 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222822 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni12 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni5 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni14 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni0 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni16 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    cc3mni1 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni6 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    cc3mni3 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    ccmni1 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    cc3mni5 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

    cc3mni7 ESSIDff/any Nickname:""
    NWID:0 Mode:Unknown/bug Channel:0
    Access Point: B8:F2:7F:00:00:00 Bit Rate=-222765 kb/s Sensitivity=-222765016 dBm
    RTS thr=-222765016 B Fragment thr=-222765016 B
    Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
    Power Managementn

  12. #12
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    What adapters are you using? I'll try to patch the drivers for them.
    I can't promise anything though as the Gemini uses an ancient android kernel but I'll give it my best shot.

  13. #13
    Join Date
    2019-Jan
    Posts
    124
    well after some trying differnt comands I knew plus the new ones you showed me I got the arthros working in airodunp. as for addappters I think I have them all. even the generics, alfa nha, ach, aw1900, aw1200, nh, tplink 722 a few of all versions, then some generic ones with working chipsets. I need to rename wlan 1 to wlan1mon to use in apps. I was about to google but since your the one who makes the firmware for almost all my toys a dozen pi's , gdp pocket, gemini, **** eventually gonna get that eye of amon. I'm gonna guess you know how to change the name. by the way your work is the best out there. I was using the 1900 with crazy antennies a year on the pocket kali before anyone. **** I still see requests from people. who can't get it working.20190227_102300.jpg

  14. #14
    Join Date
    2019-Jan
    Posts
    124
    oh I guess o should of said 99% ogf the time I use athros . and soince they almost work perfect. I cealy. just need a way for wifite, airmogedon, hcxdumptool, ect to tell its in mon mode. I can't seem to find a command that switches the name to fool then. I looked all day. I think I might be googling the wrong things

  15. #15
    Join Date
    2016-Dec
    Posts
    806
    @nikmel420, check out airmon-ng (the code). Depending on the driver, iw may be used and in this case, that's how it renames the interface.

    By the way, it's Atheros and Airodump-ng. There are a few Alfa that have NH in their name, and AW1200, is AWUS1200 I believe, same for the 1900.

  16. #16
    Join Date
    2019-Jan
    Posts
    124
    Thanks for the info. Ill check it out. As for the spelling. I suck and my keyboard sucks. If its relivent ill fix it otherwise i just let it stay phonetcly. U knew what i meant. For an error ill of course use exact spelling and capitlization. And realy its a luck thing. The gemini is crazy buggy. but it could be me.

  17. #17
    Join Date
    2016-Dec
    Posts
    806
    capitalization in that case isn't important. However, model names are because different model numbers often have a completely different chipset. Even sometimes a different hardware version (v1 vs v2) can have a totally different chipset (eg: TP-Link WN722N v1 vs v2)

  18. #18
    Join Date
    2019-Jan
    Posts
    124
    Yea i know ive got 9 tp722's only 3 ver1. They all were supposed to be ver1 . Alfa 36NHA is my go to. But im getting off topic my bad

  19. #19
    Join Date
    2018-Jan
    Posts
    8
    Hey I heard you ported nethunter to the Gemini. Wanted to ask you is there a reason it comes up with "ethtool failed only mac80211 devices on kernel 2.6.33 or higher are officially supported by airmon-ng"? I'm trying to use panda pau05 as the external Wi-Fi card and I can get wlan1 to come up using "ifconfig wlan1 up" but there's no wireless extensions when I type in iwconfig wlan1... Any help would be appreciated

  20. #20
    Join Date
    2019-Mar
    Posts
    7
    Hey. For convenience, I bought a PDA Twins. I installed Kali Linux on it. faced two problems.
    1) the first problem when updating apt update && apt install kali-linux-full I have a failure. because of Vim-tiny packet errors. problem solved.
    'dpkg-r vim-tiny` and the update is ongoing. but 268 packages are not updated.
    if you do
    `apt update`
    apt upgrade ' then after upgrade after reboot linux is not enabled.
    2) the problem is in the monitor mode. wlan0 and wlan1
    airmon-ng
    Ethtool failed ....
    Airman officially only supports Mac80211 devices with a kernel 2.6.33 or higher.
    connected alpha China Ralink. RT2870 / RT3070
    the same is not the result.
    tell me where and how to put the wood. the driver is not put.

  21. #21
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    @Anti-Hero - let me check. I think I might have one of those babies lying around somewhere.

  22. #22
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Quote Originally Posted by prom23 View Post
    Hey. For convenience, I bought a PDA Twins. I installed Kali Linux on it. faced two problems.
    1) the first problem when updating apt update && apt install kali-linux-full I have a failure. because of Vim-tiny packet errors. problem solved.
    'dpkg-r vim-tiny` and the update is ongoing.
    Great find, thanks for sharing

    Quote Originally Posted by prom23 View Post
    but 268 packages are not updated.
    if you do
    `apt update`
    apt upgrade ' then after upgrade after reboot linux is not enabled.
    The latest version of systemd that gets installed during the upgrade breaks the sddm login screen. It is being worked on but for now you can downgrade to the previous version and put the package on hold until that bug has been fixed upstream.
    Just ssh into your Gemini and type:

    Code:
    sudo apt install systemd=239-12~bpo9+1 libsystemd0=239-12~bpo9+1 libnss-systemd=239-12~bpo9+1 libpam-systemd=239-12~bpo9+1 libcryptsetup4
    sudo apt-mark hold systemd

    Quote Originally Posted by prom23 View Post
    the problem is in the monitor mode. wlan0 and wlan1
    airmon-ng
    Ethtool failed ....
    Airman officially only supports Mac80211 devices with a kernel 2.6.33 or higher.
    connected alpha China Ralink. RT2870 / RT3070
    the same is not the result.
    tell me where and how to put the wood. the driver is not put.
    I've got an RT3070 adapter lying around somehere. Let me do some tests and I'll get back to you on that.

  23. #23
    Join Date
    2019-Mar
    Posts
    7
    re4sonthanks waiting

  24. #24
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    I've tested AWUS036NEH and AWUS036NH and both work fine on the Gemini.
    Just install the ralink firmware:
    Code:
    sudo apt install firmware-ralink
    and enable monitor mode manually before running aircrack-ng:
    Code:
    sudo iw phy `iw dev wlan1 info | gawk '/wiphy/ {printf "phy" $2}'` interface add wlan1mon type monitor
    You'll now have a monitor interface called "wlan1mon".

    Code:
    kali@kali:~$ sudo aireplay-ng -9 wlan1mon
    15:23:29  Trying broadcast probe requests...
    15:23:29  Injection is working!
    15:23:31  Found 5 APs

    Hope that helps and please let us know how you go,
    Re4son

  25. #25
    Join Date
    2019-Mar
    Posts
    7
    Quote Originally Posted by prom23 View Post
    re4sonthanks waiting
    Thanks )))) everything works!! you're smart. wlan1mon works. and how to make that wlan0mon gemini pda the built-in modem worked ?

  26. #26
    Join Date
    2019-Mar
    Posts
    7
    Quote Originally Posted by re4son View Post
    I've tested AWUS036NEH and AWUS036NH and both work fine on the Gemini.
    Just install the ralink firmware:
    Code:
    sudo apt install firmware-ralink
    and enable monitor mode manually before running aircrack-ng:
    Code:
    sudo iw phy `iw dev wlan1 info | gawk '/wiphy/ {printf "phy" $2}'` interface add wlan1mon type monitor
    You'll now have a monitor interface called "wlan1mon".

    Code:
    kali@kali:~$ sudo aireplay-ng -9 wlan1mon
    15:23:29  Trying broadcast probe requests...
    15:23:29  Injection is working!
    15:23:31  Found 5 APs

    Hope that helps and please let us know how you go,
    Re4son

    hi thanks everything works. Prompt how to configure the internal modem of gemini pda . With an external modem everything turned out.

  27. #27
    Join Date
    2018-Jan
    Posts
    8
    Hey Re4son did you ever manage to figure out that issue I asked about earlier? I still can't find a way to use airmon-ng with panda pau05

  28. #28
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Hi Anti-Hero,

    Yes, same as above
    I've tested a Panda PAU09, which appears to have the same chipset as the PAU05 and the above procedure worked like a charm.

    Could you give that a try please and let us know how you go?

    Many thanks,
    Re4son

  29. #29
    Join Date
    2018-Jan
    Posts
    8
    Thanks for the reply re4son.

    Unfortunately when I type out that code I get
    command failed: Too many open files in system (-23)

  30. #30
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Just remembered that you were using Nethunter, right?

  31. #31
    Join Date
    2018-Jan
    Posts
    8
    @re4son that's right I am trying to use nethunter on the Gemini 4g.

  32. #32
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    I just tried the PAU09 in NetHunter without problems. Let me check the differences between that one and your PAU05
    Last edited by re4son; 2019-04-06 at 04:54.

  33. #33
    Join Date
    2018-Jan
    Posts
    8
    I appreciate it! I'll be waiting.

  34. #34
    Join Date
    2019-Mar
    Posts
    7
    1) Dear re4son forgot about me. Prompt it is possible to use the internal modem but not external on gemini pda. 2) does not load wifite.

  35. #35
    Join Date
    2019-Mar
    Posts
    7
    screen.jpg

    here's a screen then not loaded

  36. #36
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Hi prom23,

    the internal wifi adapter doesn't support monitor mode so you have to use an external one. Once you create a monitor interface via:
    Code:
    sudo iw phy `iw dev wlan1 info | gawk '/wiphy/ {printf "phy" $2}'` interface add wlan1mon type monitor
    you can start wifite on that interface, i.e.:

    Code:
    wifite -i wlan1mon
    Please let us know how you go.

    Many thanks,
    Re4son

  37. #37
    Join Date
    2019-Mar
    Posts
    7
    Quote Originally Posted by re4son View Post
    Hi prom23,

    the internal wifi adapter doesn't support monitor mode so you have to use an external one. Once you create a monitor interface via:
    Code:
    sudo iw phy `iw dev wlan1 info | gawk '/wiphy/ {printf "phy" $2}'` interface add wlan1mon type monitor
    you can start wifite on that interface, i.e.:

    Code:
    wifite -i wlan1mon
    Please let us know how you go.

    Many thanks,
    Re4son

    thanks all works

  38. #38
    Join Date
    2018-Jan
    Posts
    8
    @reason if you tell me the code you used to start your pau09 I'll try it with my pau05 and let you know if it works..like I said when I plug mine in and use ifconfig wlan1 up it comes up but iwconfig shows it as no wireless extensions

  39. #39
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    @Anti-Hero - this work for me:
    Code:
    sudo apt install firmware-ralink
    connect the adapter
    Code:
    sudo iw phy `iw dev wlan1 info | gawk '/wiphy/ {printf "phy" $2}'` interface add wlan1mon type monitor
    sudo aireplay-ng -9 wlan1mon

  40. #40
    Join Date
    2018-Jan
    Posts
    8
    That did work actually. Last time I tried this I tried the first line of code without the aireplay-ng and tried ifconfig but it did not show the interface.. But once I tried the aireplay-ng part it worked. Thanks re4son that's awesome!

  41. #41
    Join Date
    2019-Mar
    Posts
    9
    This is all using wlan1, has anyone been able to get the built-in wifi to work in monitor mode (wlan0)?

  42. #42
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Hi clintonm9,

    That would be the icing on the cake but unfortunately the build-in wifi doesn't support monitor mode. It's a Mediatek x27 SoC and I don't think the hardware even supports it.

  43. #43
    Join Date
    2019-Jan
    Posts
    124
    saw alot about the panda 005. now i aint one to gosip so u didnt hear this from me. the p005 on amazon has a difer ent chip. not ralink.thats all i have to say about that

  44. #44
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Sneaky.
    Thanks for sharing

  45. #45
    Join Date
    2019-Jan
    Posts
    124
    right on i burned it yesterday. after some brain farts during setup i turned off. had my share of pi for the day.i should of checked the new features

Similar Threads

  1. Gemini monitoring mode question & using hcxdumptool
    By clintonm9 in forum ARM Archive
    Replies: 2
    Last Post: 2019-06-16, 01:44
  2. gemini nethunter
    By nikmel420 in forum Building NetHunter
    Replies: 2
    Last Post: 2019-05-20, 13:57
  3. Gemini pda image
    By nikmel420 in forum ARM Archive
    Replies: 2
    Last Post: 2019-01-25, 09:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •