Captura de pantalla de 2019-03-19 12-01-11.jpgCaptura de pantalla de 2019-03-19 10-06-08.jpg

KALI VERSION 2019.a1
Kali Architecture 64bits

[1] wlan0 [-] Ralink Technology, Corp. RT2870/RT3070
[2] wlan1 [+] Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

no network adapter found closing ...

the error that appears with the linset, fluxion, wifimosys script
no network adapter was found cleaning and closing
despite being connected by wifi


Currently these are my interfaces with ifconfig

eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 20:47:47:05:7d:30 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 3101 bytes 277197 (270.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3101 bytes 277197 (270.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=867<UP,BROADCAST,NOTRAILERS,RUNNING,PROMISC, ALLMULTI> mtu 1500
inet 192.168.1.67 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::37e6:3aab:a998:9aa8 prefixlen 64 scopeid 0x20<link>
ether e8:de:27:10:67:c5 txqueuelen 1000 (Ethernet)
RX packets 1076950 bytes 1484056999 (1.3 GiB)
RX errors 0 dropped 36248 overruns 0 frame 0
TX packets 567641 bytes 57659170 (54.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan1: flags=803<UP,BROADCAST,NOTRAILERS,PROMISC,ALLMULTI > mtu 1500
ether 5a:9a:8d:2b:5c:82 txqueuelen 1000 (Ethernet)
RX packets 4920 bytes 364704 (356.1 KiB)
RX errors 0 dropped 4323 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0






thank you very much for any help you can give me