How to use with Raspbian System
Step 1, Install Raspbian official image
1.download the latest image from the official download.
2.install the system according to the official tutorial steps.
Step 2, modify the “config.txt”
After the programming of Step1 is completed, open the config.txt file of TF card root directory
and add the following code at the end of the file, save and eject TF card safely:
max_usb_current=1
hdmi_force_hotplug=1 config_hdmi_boost=7
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0
Step 3, Run
Insert the SD card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB
cable to one of the four USB ports of raspberry PI, and connect the other end of the USB cable to
the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch
both are OK, it means drive successfully ( pls use the full 2.5A for power supply).