Raspberry Pi 4: No wifi after update && upgrade

[draftphunc]

After booting the first time kali-linux-2019.2a-rpi3-nexmon on the Raspberry Pi 4 (4GB) everything works fine - wifi is working.

But after executing

sudo apt-get update && sudo apt-get upgrade

and rebooting the Raspberry, the wifi is not working anymore. It seems that the wlan interface is missing, because the command

iwconfig

returns no wlan0 interface.

Adding a wlan0 interface to the /etc/network/interfaces file and restarting the network-manager via

service network-manager restart

doesn't solve the issue.

Is this issue known?
Do you know what I can do to bring the wifi back?

[zhovner]

Can you please show output of dmesg command?

[Sinarat]

Hi everyone !
I have the same issue (no wifi interface after upgrade on raspberry 4)
This is my dmesg output:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.66-Re4son-v7l+ (root@Kali-Pi4) (gcc version 8.2.0 (Debian 8.2.0-6)) #1 SMP Mon Aug 19 08:12:03 AEST 2019
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 64 MiB at 0x0000000037400000
[ 0.000000] On node 0 totalpages: 504832
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 308224 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e0 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s40844 r8192 d20596 u69632
[ 0.000000] pcpu-alloc: s40844 r8192 d20596 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 503104
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:02:64:2A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1918896K/2019328K available (8192K kernel code, 707K rwdata, 2396K rodata, 2048K init, 858K bss, 34896K reserved, 65536K cma-reserved, 1167360K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (10208 kB)
.init : 0x(ptrval) - 0x(ptrval) (2048 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 708 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 859 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28712 entries in 85 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000021] Switching to timer-based delay loop, resolution 18ns
[ 0.000241] Console: colour dummy device 80x30
[ 0.000706] console [tty1] enabled
[ 0.000755] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.000798] pid_max: default: 32768 minimum: 301
[ 0.001075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001107] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002186] Disabling memory control group subsystem
[ 0.002283] CPU: Testing write buffer coherency: ok
[ 0.002692] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003338] Setting up static identity map for 0x200000 - 0x20003c
[ 0.003509] rcu: Hierarchical SRCU implementation.
[ 0.004372] smp: Bringing up secondary CPUs ...
[ 0.005227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006198] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007124] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007256] smp: Brought up 1 node, 4 CPUs
[ 0.007320] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.007342] CPU: All CPU(s) started in HYP mode.
[ 0.007362] CPU: Virtualization extensions available.
[ 0.008121] devtmpfs: initialized
[ 0.018656] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.018895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018936] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.020737] pinctrl core: initialized pinctrl subsystem
[ 0.021548] NET: Registered protocol family 16
[ 0.024540] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.025978] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026009] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.026214] Serial: AMBA PL011 UART driver
[ 0.029128] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.063717] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.063763] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.064616] bcm2835-dma fe007b00.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.065822] vgaarb: loaded
[ 0.066203] SCSI subsystem initialized
[ 0.066405] usbcore: registered new interface driver usbfs
[ 0.066476] usbcore: registered new interface driver hub
[ 0.066586] usbcore: registered new device driver usb
[ 0.080328] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:03, variant start
[ 0.090079] raspberrypi-firmware soc:firmware: Firmware hash is 9f8431fb7839c7f00f52b81f5822ddab2b31d0db
[ 0.101681] clocksource: Switched to clocksource arch_sys_counter
[ 0.181200] VFS: Disk quotas dquot_6.6.0
[ 0.181309] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.181467] FS-Cache: Loaded
[ 0.181658] CacheFiles: Loaded
[ 0.190922] NET: Registered protocol family 2
[ 0.191729] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.191775] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.191847] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.191929] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.192061] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.192105] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.192318] NET: Registered protocol family 1
[ 0.192862] RPC: Registered named UNIX socket transport module.
[ 0.192887] RPC: Registered udp transport module.
[ 0.192907] RPC: Registered tcp transport module.
[ 0.192928] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.192955] PCI: CLS 0 bytes, default 64
[ 0.195474] Initialise system trusted keyrings
[ 0.195654] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.204874] FS-Cache: Netfs 'nfs' registered for caching
[ 0.205380] NFS: Registering the id_resolver key type
[ 0.205423] Key type id_resolver registered
[ 0.205445] Key type id_legacy registered
[ 0.205476] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.210291] Key type asymmetric registered
[ 0.210318] Asymmetric key parser 'x509' registered
[ 0.210447] bounce: pool size: 64 pages
[ 0.210498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.210681] io scheduler noop registered
[ 0.210705] io scheduler deadline registered
[ 0.210874] io scheduler cfq registered (default)
[ 0.210897] io scheduler mq-deadline registered
[ 0.210919] io scheduler kyber registered
[ 0.213884] brcm-pcie fd500000.pcie: could not get clock
[ 0.213959] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.214009] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.271750] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.272089] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.272121] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.272151] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.272219] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.272355] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.274980] PCI: bus0: Fast back to back transfers disabled
[ 0.275011] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.275189] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.275248] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.275415] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.277963] PCI: bus1: Fast back to back transfers disabled
[ 0.277993] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 0.278037] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.278070] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.278118] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.278146] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.278373] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.278555] pcieport 0000:00:00.0: Signaling PME with IRQ 53
[ 0.278721] pcieport 0000:00:00.0: AER enabled with IRQ 53
[ 0.278871] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.279244] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.318661] Console: switching to colour frame buffer device 240x67
[ 0.329100] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ 0.332026] iproc-rng200 fe104000.rng: hwrng registered
[ 0.332291] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.332878] vc-sm: Videocore shared memory driver
[ 0.333307] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 0.343520] brd: module loaded
[ 0.353482] loop: module loaded
[ 0.354292] Loading iSCSI transport class v2.0-870.
[ 0.356029] libphy: Fixed MDIO Bus: probed
[ 0.356482] bcmgenet fd580000.genet: failed to get enet clock
[ 0.356560] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 0.356633] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 0.356709] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 0.356791] bcmgenet: Skipping UMAC reset
[ 0.357071] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 0.371713] libphy: bcmgenet MII bus: probed
[ 0.412386] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 0.413363] usbcore: registered new interface driver r8152
[ 0.413482] usbcore: registered new interface driver lan78xx
[ 0.413591] usbcore: registered new interface driver smsc95xx
[ 0.413873] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.413958] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.415955] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[ 0.416215] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54
[ 0.416918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.417012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.417093] usb usb1: Product: xHCI Host Controller
[ 0.417154] usb usb1: Manufacturer: Linux 4.19.66-Re4son-v7l+ xhci-hcd
[ 0.417228] usb usb1: SerialNumber: 0000:01:00.0
[ 0.417793] hub 1-0:1.0: USB hub found
[ 0.417886] hub 1-0:1.0: 1 port detected
[ 0.418340] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.420923] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.423551] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.426428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.429082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.431808] usb usb2: Product: xHCI Host Controller
[ 0.434468] usb usb2: Manufacturer: Linux 4.19.66-Re4son-v7l+ xhci-hcd
[ 0.437119] usb usb2: SerialNumber: 0000:01:00.0
[ 0.440322] hub 2-0:1.0: USB hub found
[ 0.443048] hub 2-0:1.0: 4 ports detected
[ 0.446773] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.475004] dwc_otg fe980000.usb: base=(ptrval)
[ 0.677941] Core Release: 2.80a
[ 0.680572] Setting default values for core params
[ 0.683237] Finished setting default values for core params
[ 0.886152] Using Buffer DMA mode
[ 0.888744] Periodic Transfer Interrupt Enhancement - disabled
[ 0.891353] Multiprocessor Interrupt Enhancement - disabled
[ 0.893945] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.896509] Dedicated Tx FIFOs mode
[ 0.899275] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = f2a49000 dma = 0x00000000f7544000 len=9024
[ 0.901958] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.915060] dwc_otg: Microframe scheduler enabled
[ 0.915119] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.917723] WARN::hcd_init_fiq:458: FIQ ASM at c07ec1a8 length 36
[ 0.920312] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200
[ 0.922951] dwc_otg fe980000.usb: DWC OTG Controller
[ 0.925554] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
[ 0.928174] dwc_otg fe980000.usb: irq 37, io mem 0x00000000
[ 0.930829] Init: Port Power? op_state=1
[ 0.931727] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 0.933380] Init: Power Port (0)
[ 0.938659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.941222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.943801] usb usb3: Product: DWC OTG Controller
[ 0.946340] usb usb3: Manufacturer: Linux 4.19.66-Re4son-v7l+ dwc_otg_hcd
[ 0.948915] usb usb3: SerialNumber: fe980000.usb
[ 0.952004] hub 3-0:1.0: USB hub found
[ 0.954607] hub 3-0:1.0: 1 port detected
[ 0.957736] dwc_otg: FIQ enabled
[ 0.957746] dwc_otg: NAK holdoff enabled
[ 0.957755] dwc_otg: FIQ split-transaction FSM enabled
[ 0.957769] Module dwc_common_port init
[ 0.958007] usbcore: registered new interface driver uas
[ 0.960731] usbcore: registered new interface driver usb-storage
[ 0.963539] mousedev: PS/2 mouse device common for all mice
[ 0.967227] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.970038] bcm2835-cpufreq: min=600000 max=1500000
[ 0.973293] sdhci: Secure Digital Host Controller Interface driver
[ 0.975857] sdhci: Copyright(c) Pierre Ossman
[ 0.978820] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 0.981915] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.985795] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.987199] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.988595] usbcore: registered new interface driver usbhid
[ 0.989914] usbhid: USB HID core driver
[ 0.991639] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.994005] [vc_sm_connected_init]: start
[ 1.002553] [vc_sm_connected_init]: end - returning 0
[ 1.004350] Initializing XFRM netlink socket
[ 1.005652] NET: Registered protocol family 17
[ 1.006978] Key type dns_resolver registered
[ 1.008407] Registering SWP/SWPB emulation handler
[ 1.009938] registered taskstats version 1
[ 1.011238] Loading compiled-in X.509 certificates
[ 1.012936] Key type encrypted registered
[ 1.017889] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.019200] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 1.022511] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.024063] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 1.025629] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.026933] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.051927] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
[ 1.072949] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.077229] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.081473] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.084149] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.089124] of_cfs_init
[ 1.091853] of_cfs_init: OK
[ 1.094008] Waiting for root device /dev/mmcblk0p2...
[ 1.097445] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.100300] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.122929] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[ 1.125526] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.128064] usb 1-1: Product: USB2.0 Hub
[ 1.132073] hub 1-1:1.0: USB hub found
[ 1.134836] hub 1-1:1.0: 4 ports detected
[ 1.142821] random: fast init done
[ 1.195758] mmc0: new ultra high speed DDR50 SDXC card at address 5048
[ 1.199650] mmcblk0: mmc0:5048 SD64G 57.9 GiB
[ 1.203476] mmcblk0: p1 p2
[ 1.205446] mmc1: new high speed SDIO card at address 0001
[ 1.223828] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[ 1.225142] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.232798] devtmpfs: mounted
[ 1.243074] Freeing unused kernel memory: 2048K
[ 1.271773] Run /sbin/init as init process
[ 1.461735] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 1.602525] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 1.605192] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.607770] usb 1-1.3: Product: USB Receiver
[ 1.610318] usb 1-1.3: Manufacturer: Logitech
[ 1.712989] systemd[1]: System time before build time, advancing clock.
[ 1.805737] NET: Registered protocol family 10
[ 1.807621] Segment Routing with IPv6
[ 1.833371] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 1.836370] systemd[1]: Detected architecture arm.
[ 1.867042] systemd[1]: Set hostname to <kali>.
[ 1.869550] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 2.138735] systemd[1]: /lib/systemd/system/systemd-udevd.service:19: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring
[ 2.140237] systemd[1]: /lib/systemd/system/systemd-udevd.service:23: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring
[ 2.342073] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.348137] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.349728] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.366499] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 2.367997] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.369687] systemd[1]: Listening on Syslog Socket.
[ 2.375348] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.600949] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.685732] systemd-journald[136]: Received request to flush runtime journal from PID 1
[ 2.696014] systemd-journald[136]: File /var/log/journal/f2cdcf82f42a42ada8bb36c040af90c1/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.267852] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 3.271534] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 3.274768] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 3.281390] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 3.321917] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.324644] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 3.327591] [vc_sm_connected_init]: start
[ 3.329864] [vc_sm_connected_init]: installed successfully
[ 3.336971] media: Linux media interface: v0.10
[ 3.370183] videodev: Linux video capture interface: v2.00
[ 3.406072] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.412086] bcm2835_audio soc:audio: card created with 8 channels
[ 3.418862] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.418864] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.447776] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.503048] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.518517] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[ 3.525284] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 3.527056] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 3.536409] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.541025] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 3.542781] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 3.561954] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 3.563867] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 3.575906] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.587978] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.589703] cfg80211: failed to load regulatory.db
[ 3.607918] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.621799] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.623715] usbcore: registered new interface driver brcmfmac
[ 3.655985] input: Logitech Unifying Device. Wireless PID:1024 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:1024.0004/input/input0
[ 3.658270] hid-generic 0003:046D:1024.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:01:00.0-1.3:1
[ 3.663145] input: Logitech Unifying Device. Wireless PID:2011 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input4
[ 3.665835] input: Logitech Unifying Device. Wireless PID:2011 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input5
[ 3.668171] input: Logitech Unifying Device. Wireless PID:2011 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input6
[ 3.672469] hid-generic 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:01:00.0-1.3:2
[ 3.747013] input: Logitech M310 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:1024.0004/input/input10
[ 3.747749] logitech-hidpp-device 0003:046D:1024.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M310] on usb-0000:01:00.0-1.3:1
[ 4.023138] input: Logitech K520 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input11
[ 4.023562] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:01:00.0-1.3:2
[ 4.722341] uart-pl011 fe201000.serial: no DMA platform data
[ 4.741717] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 4.874083] Bluetooth: Core ver 2.22
[ 4.874762] NET: Registered protocol family 31
[ 4.875330] Bluetooth: HCI device and connection manager initialized
[ 4.877004] Bluetooth: HCI socket layer initialized
[ 4.877578] Bluetooth: L2CAP socket layer initialized
[ 4.878249] Bluetooth: SCO socket layer initialized
[ 4.912312] Bluetooth: HCI UART driver ver 2.3
[ 4.912917] Bluetooth: HCI UART protocol H4 registered
[ 4.913519] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.916944] Bluetooth: HCI UART protocol Broadcom registered
[ 5.303142] bcmgenet: Skipping UMAC reset
[ 5.380324] random: crng init done
[ 5.380866] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.402369] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 5.404042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.751906] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 6.471924] bcmgenet fd580000.genet eth0: Link is Down
[ 10.631983] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.633247] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.115988] logitech-hidpp-device 0003:046D:2011.0005: HID++ 1.0 device connected.
[ 30.945014] logitech-hidpp-device 0003:046D:1024.0004: HID++ 1.0 device connected.

Any idea ?

[dalma]

Same for me. Raspberry Pi 4, clean install of 2019.2a built in wireless adapter shows up fine. After doing an apt update/upgrade, built in wireless adapter goes missing

[Heartbeat1]

Hey, ive got the Same Problem. Also this Problem shows up at the 64Bit Image

Kali Linux RaspberryPi 2(v1.2), 3 and 4 64-Bit

919M

2019.3

91db0f2130310b9ac00c3524991ab8307a8d07bd4c804e6f48 0dcd7a07cf00d3

[jzerocsk]

For me upgrading failed catastrophically.

Writing a new sdcard exhibits same problem as above, the on-board wifi is not working.

Also, the release notes posted at https://www.kali.org/releases/kali-l...019-3-release/ state that

All of the RaspberryPi images have had their /boot partition increased, which is required due to the size of the new kernel packages.

But even on the newly imaged sdcard, the partition is only 122MB, which I suspect is part of the problem....I am wondering if an incorrect/incomplete RPi image went up...



Something tells me the

[Mister_X]

Updating should solve it now: apt update && apt dist-upgrade then reboot

[r41nm4k3r]

Is monitor mode and injection working after apt dist-upgrade?

[toitzi]

Fresh install of Kali Linux 2019.3 (nexmon) 64Bit, flashed with etcher. Everything works except the wlan card ist not available.
Anybody knows what to do? My router sadly has no "Ethernet" port so it is not possible for me to do an apt update

[morpus]

guys i need serious help, i loaded kali linux 64 bit verison for my raspberry pi 4 model, but i am not able to connect to my hotspot or wifi network any how, the only option it shows is ethernet or add vpn. i cant use ethernet as i only use my mobile phone for hotspot. guys please help here

[daneshcamp]

hi
you can use apt update && apt dist-upgrade then reboot

[Mister_X]

64bit is experimental, just FYI

[Detri]

Having the same issue still.

lsusb shows the device plugged in but I am unable to use wlan or bluetooth, external or built in.

After the hassle that I went through to get everything working before, the only apparent solution is to re-image with an older version and redo all the work I did before.

Pretty annoying that there hasn't been a fix to the issue that the update caused.

[ddpch]

Having the same issue still.

lsusb shows the device plugged in but I am unable to use wlan or bluetooth, external or built in.

After the hassle that I went through to get everything working before, the only apparent solution is to re-image with an older version and redo all the work I did before.

Pretty annoying that there hasn't been a fix to the issue that the update caused.

guys i need serious help, i loaded kali linux 64 bit verison for my raspberry pi 4 model, but i am not able to connect to my hotspot or wifi network any how, the only option it shows is ethernet or add vpn. i cant use ethernet as i only use my mobile phone for hotspot

[steev]

guys i need serious help, i loaded kali linux 64 bit verison for my raspberry pi 4 model, but i am not able to connect to my hotspot or wifi network any how, the only option it shows is ethernet or add vpn. i cant use ethernet as i only use my mobile phone for hotspot

Does dmesg show any output when you connect the phone? It's possible that there isn't a device driver for whatever your phone is showing up as to the rpi, but we won't know without that output.

[Danger189]

***disclaimer*** I'm new to Kali and new to Linux, but I am an IT professional. ***end disclaimer***

I had the same problem when I first loaded up my SD card, turns out that my problem was I downloaded the wrong image. I was (at first) trying to load the "Kali Linux Raspberry Pi Zero" image onto my Raspberry Pi 4 B. just as described the wifi worked perfectly until I ran apt-get update and apt-get upgrade, then it either won't boot at all or the wifi wouldn't work.

So, my suggestion is to double check what image you're using. For me, I needed to use "Kali Linux RaspberryPi 2, 3 and 4". Hope it helps