Results 1 to 2 of 2

Thread: TP-Link tl-wn722n v3. The problem with the driver on the kernel 5.3.9. What adapters will work on th

  1. #1
    Join Date
    2019-Nov
    Posts
    1

    TP-Link tl-wn722n v3. The problem with the driver on the kernel 5.3.9. What adapters will work on th

    Is there a tl-wn722n v3 driver with monitor mode and packet injection? For the kernel 5.3.0 ?????
    What adapters will work in 2019.4 with the 5.3.9 kernel ??

    root@kali:~# ifconfig
    eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether 50:9a:4c:d0:92:b1 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 1000 (Local Loopback)
    RX packets 890 bytes 36520 (35.6 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 890 bytes 36520 (35.6 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.0.107 netmask 255.255.255.0 broadcast 192.168.0.255
    inet6 fe80::4603:2cff:fe8b:f5e2 prefixlen 64 scopeid 0x20<link>
    ether 44:03:2c:8b:f5:e2 txqueuelen 1000 (Ethernet)
    RX packets 85310 bytes 101673329 (96.9 MiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 30006 bytes 4524234 (4.3 MiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    wlan1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether 50:3e:aa:e7:08:da txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 12822 (12.5 KiB)
    RX errors 0 dropped 14 overruns 0 frame 0
    TX packets 0 bytes 6283 (6.1 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    root@kali:~# airmon-ng

    PHY Interface Driver Chipset

    phy0 wlan0 iwlwifi Intel Corporation Wireless 3165 (rev 79)
    null wlan1 r8188eu TP-Link TL-WN722N v2

    root@kali:~# ifconfig wlan1 down
    root@kali:~# airmon-ng check kill

    Killing these processes:

    PID Name
    81484 wpa_supplicant

    root@kali:~# iwconfig wlan1 mode monitor
    Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan1 ; Invalid argument.
    root@kali:~# ifconfig wlan1 up

  2. #2
    Join Date
    2019-Sep
    Location
    Hungary
    Posts
    2
    Here is a link with network adapters that support monitor mode: https://forums.kali.org/showthread.p...Wireless-Cards
    As i know the v2 not support monitor mode, only v1 (because of ath9k).
    Whenever you buy an adapter, you shuold check the chipset it use.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •