Trouble with AWUS036neh-003

[kanyonkritterx]

I am having trouble with my AWUS036NEH-003 kali detects the card but it will not find any networks something about unstable hardware I have 3 of them and get the same results from all 3 the dmesg log is as follows:

[!] Note: Leaving interface in Monitor Mode!
[!] To disable Monitor Mode when finished: airmon-ng stop wlan1mon
root@kali:~# dmesg | grep rt2
[ 12.897707] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 12.913217] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 12.914735] usbcore: registered new interface driver rt2800usb
[ 18.607157] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 18.635558] rt2800usb 1-4:1.0: firmware: direct-loading firmware rt2870.bin
[ 18.635577] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 18.944929] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71
[ 20.170264] ieee80211 phy1: rt2800_wait_csr_ready: Error - Unstable hardware
[ 20.170281] ieee80211 phy1: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
[ 106.785641] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 106.803704] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 106.858702] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 106.858727] rt2800usb 1-4:1.0: firmware: direct-loading firmware rt2870.bin
[ 106.858730] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 108.334255] ieee80211 phy2: rt2800_load_firmware: Error - PBF system register not ready
[ 7063.797474] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 7063.809625] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 7064.172266] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 7064.172294] rt2800usb 1-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 7064.172298] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 7066.100512] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71
[ 7067.362675] ieee80211 phy3: rt2800_wait_csr_ready: Error - Unstable hardware
[ 7067.362691] ieee80211 phy3: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)

[rets34]

I'm having the exact same issues, I think I also say similar ones on the thread too.

[teroclro]

Do what i done get a diff adapter no matter what i tried when running airodump-ng wlan0mon i got no ap's you will spend hours trying all the diff fixes only for it not to work
I even installed the aircrack-ng suite on the latest ubuntu and it never worked
in the end i bought the alfa AWUS036ACM and it worked straight away

[undersc0re]

Do what i done get a diff adapter no matter what i tried when running airodump-ng wlan0mon i got no ap's you will spend hours trying all the diff fixes only for it not to work
I even installed the aircrack-ng suite on the latest ubuntu and it never worked
in the end i bought the alfa AWUS036ACM and it worked straight away

I have this card as well, it used to work for me quite a while ago....they changed something in kali sometime along the way and it no longer works for me either....