When i open kex via kex client or via vnc a desktop is open , but i cant do nothing, when i push the icons its not open.
When i open kex via kex client or via vnc a desktop is open , but i cant do nothing, when i push the icons its not open.
Strange. What device and which image are you using?
Oneplus 7, android 10 , kali nethunter 2020.rc12, nethunter apk 2020.1
Last edited by Vitkolker; 2020-01-24 at 21:11.
have you any ideas about this. Thanks.
1. Open NetHunter app.
2. Tap the 3 lines in the upper-left.
3. Select Kex Manager.
4. Tap Start Server.
5. Go back to your KeX client. It should be able to connect now.
A problem is not that i cant start the kex manager, i open kex manager, i see the desktop, in kex client, but cant do nothing in it, when i push the icons its not working.
Ok, did you try updating the Kali environment?
if not, first stop your GUI in KeX manager. Then, go to a nethunter terminal, and tap Kali.
from the command prompt, type
if you have never updated Kali this way, then it will take quite a while to perform this task. When it drops you back to a blinking cursor, then the process is finished. Reboot your phone, and open KeX Manager, start KeX and open KeX Client.apt-get update && apt-get full-upgrade -y
Does this make any difference for you?
No ,its still not work for mi, i see the desktop of kex manager , in localhost, or via vnc but cant do nothing , i see the mouse, i can moove mouse, but then i push the icons it not open .
thanks for participating, everything works, figured out, I logged in with the wrong password
Just to clarify Vitkolker's response. (I also figured it out, but noticed he beat me to it):
When you setup your KeX, you are asked to create a password, and optionally, a "view only" password. The VNC viewer was setup to use the "View Only" password, which is why he was unable to interact with the desktop.
Thanks for sharing @aaronouthier
Hi, I'm a newbie. Could please explain in details. I set Kex pass and said "no" to set "view only passwords".
so, for sure I log in with right pass and the problem exist: can view but could not tap any button
Hi, I'm a newbie and have same problem: only view desktop and can not tap the mouse.
I set Kex pass and did not set (said "no") view only password. so for sure I use right pass on Kex Client.
Please, help
I have the same problem can view desktop but no tapping. More then that, suddenly It worked for several seconds and disappeared again
I have same problem and for sure use right passwd, view only pass I set "no"
I can view and sometimes mouse works and after that going again in view only mode. Please help
Use first password which you insert in kex manager
All sources tried but kex not working on nethunter OnePlus 7
same problem here and couldn't solve it with the password trick too
Laden Beauty Center with the use of state-of-the-art technology and experienced specialists in professional laser hair removal services such as bikini laser hair removal , underarm laser hair removal , facial laser hair removal and benefiting from a nutrition expert in matters related to slimming and fitness and using efficient and safe devices without any side effects in a pleasant and healthy environment along with welfare facilities is at the service of esteemed and dear clients.
Use first password which you insert in kex manager, check root user, if you connect from pc uncheck local only.
I had a similar problem and this is how I resolved. I could enter remotely but I was not able to click over any icon. Time to time when I enter I had a few second to click or edit, during this short period of time seems work normally.
Without exit or close any app from my smartphone , I switched to termux app only to give it focus again. Quickly switched to Nethunter KeX and I could used for two more second! Every time I switches between apps I could use apps for two more second.
Therefore this is a good solution.
I thought that happend because smartphone not run batch process. Every time an app is not focused suspend its execution.
Finnaly, in my Huawei, I set up battery/use of battery (display a list of apps)/ternux/app start (default is automatic management) and choose manual management/batch run enable.
And this is a better solution than switch every two second beacause was a permanent solution.
Hi friends pls help me out. I install kali linux on x-tigi v18 pro and i was working well so i wanted to go back to Android and mistakenly exit termux afterwards i wanted to connect back but when i go to my nethunter kex page i received a failure message am using nethunter kex to connect as vnc desktop
I am facing similar problem too
Yoga is for everyone. Each body is different and can benefit from breathing and movement. Even with many injuries, there is a modification that can be made to accommodate your body. Always let your instructors know what is going on with you to suggest how a posture might work.
Learn more: https://yogateachertraininggoa.com/
After updating to new version my kex manager is not working, when i click on start server my screen goes blank and my device restarts.
~ $ vncserver: No matching VNC server running for this user!
vncserver: No matching VNC server running for this user!
Error starting the KeX server.
Please try "nethunter kex kill" or restart your termux session and try again.
Stucked here...kex not starting
Similar problem on my Samsung Note 10:
Hi, How can resolve the below error?
```
[=] Kali NetHunter for Termux installed successfully
[+] To start Kali NetHunter, type:
[+] nethunter # To start NetHunter CLI
[+] nethunter kex passwd # To set the KeX password
[+] nethunter kex & # To start NetHunter GUI
[+] nethunter kex stop # To stop NetHunter GUI
[+] nethunter -r # To run NetHunter as root
[+] nh # Shortcut for nethunter
~ $ nethunter kex passwd
Password:
Verify:
Would you like to enter a view-only password (y/n)? n
~ $ nethunter kex &
[1] 31335
~ $ vncserver: No matching VNC server running for this user!
vncserver: No matching VNC server running for this user!
Error starting the KeX server.
Please try "nethunter kex kill" or restart your termux session and try again.
[1]+ Done nethunter kex
~ $ nethunter kex kill Error: /proc must be mounted
To mount /proc at boot you need an /etc/fstab line like:
proc /proc proc defaults
In the meantime, run "mount proc /proc -t proc"
~ $ nethunter kex kill :1
Error: /proc must be mounted
To mount /proc at boot you need an /etc/fstab line like:
proc /proc proc defaults
In the meantime, run "mount proc /proc -t proc"
~ $ mount proc /proc -t proc
mount: bad /etc/fstab: No such file or directory
~ $
~ $ ps -ef |grep vnc
u0_a618 14453 8907 0 1970 pts/0 00:00:00 grep vnc
~ $ vncserver -kill :1
The program vncserver is not installed. Install it by executing:
pkg install tigervnc, after running pkg in x11-repo
```
How can I get it running?
Thank you in advance.
so i installed nethunter kali linux nano on my 8.1 android tablet
then try to set nethunter kex passwd
this comes up ..any idea how to fix?
sudo: unable to send audit message: Operation not permitted
/usr/bin/kex: line 25: vncpasswd: command not found
I believe KEX is only available on the full version of NetHunter. I could be wrong however.