Results 1 to 27 of 27

Thread: Kali nethunter kex dont working

  1. #1
    Join Date
    2020-Jan
    Posts
    17

    Kali nethunter kex dont working

    When i open kex via kex client or via vnc a desktop is open , but i cant do nothing, when i push the icons its not open.

  2. #2
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Strange. What device and which image are you using?

  3. #3
    Join Date
    2020-Jan
    Posts
    17
    Oneplus 7, android 10 , kali nethunter 2020.rc12, nethunter apk 2020.1
    Last edited by Vitkolker; 2020-01-24 at 21:11.

  4. #4
    Join Date
    2020-Jan
    Posts
    17
    have you any ideas about this. Thanks.

  5. #5
    Join Date
    2019-Nov
    Posts
    169
    1. Open NetHunter app.
    2. Tap the 3 lines in the upper-left.
    3. Select Kex Manager.
    4. Tap Start Server.
    5. Go back to your KeX client. It should be able to connect now.

  6. #6
    Join Date
    2020-Jan
    Posts
    17
    A problem is not that i cant start the kex manager, i open kex manager, i see the desktop, in kex client, but cant do nothing in it, when i push the icons its not working.

  7. #7
    Join Date
    2019-Nov
    Posts
    169
    Ok, did you try updating the Kali environment?

    if not, first stop your GUI in KeX manager. Then, go to a nethunter terminal, and tap Kali.
    from the command prompt, type
    apt-get update && apt-get full-upgrade -y
    if you have never updated Kali this way, then it will take quite a while to perform this task. When it drops you back to a blinking cursor, then the process is finished. Reboot your phone, and open KeX Manager, start KeX and open KeX Client.

    Does this make any difference for you?

  8. #8
    Join Date
    2020-Jan
    Posts
    17
    No ,its still not work for mi, i see the desktop of kex manager , in localhost, or via vnc but cant do nothing , i see the mouse, i can moove mouse, but then i push the icons it not open .

  9. #9
    Join Date
    2020-Jan
    Posts
    17
    thanks for participating, everything works, figured out, I logged in with the wrong password

  10. #10
    Join Date
    2019-Nov
    Posts
    169
    Just to clarify Vitkolker's response. (I also figured it out, but noticed he beat me to it):
    When you setup your KeX, you are asked to create a password, and optionally, a "view only" password. The VNC viewer was setup to use the "View Only" password, which is why he was unable to interact with the desktop.

  11. #11
    Join Date
    2015-Nov
    Location
    Australia
    Posts
    445
    Thanks for sharing @aaronouthier

  12. #12
    Join Date
    2020-Mar
    Posts
    4
    Hi, I'm a newbie. Could please explain in details. I set Kex pass and said "no" to set "view only passwords".
    so, for sure I log in with right pass and the problem exist: can view but could not tap any button

  13. #13
    Join Date
    2020-Mar
    Posts
    4
    Hi, I'm a newbie and have same problem: only view desktop and can not tap the mouse.
    I set Kex pass and did not set (said "no") view only password. so for sure I use right pass on Kex Client.
    Please, help

  14. #14
    Join Date
    2020-Mar
    Posts
    4
    I have the same problem can view desktop but no tapping. More then that, suddenly It worked for several seconds and disappeared again

  15. #15
    Join Date
    2020-Mar
    Posts
    4
    I have same problem and for sure use right passwd, view only pass I set "no"
    I can view and sometimes mouse works and after that going again in view only mode. Please help

  16. #16
    Join Date
    2020-Jan
    Posts
    17
    Use first password which you insert in kex manager

  17. #17
    Join Date
    2020-May
    Posts
    3
    All sources tried but kex not working on nethunter OnePlus 7

  18. same problem here and couldn't solve it with the password trick too
    Laden Beauty Center with the use of state-of-the-art technology and experienced specialists in professional laser hair removal services such as bikini laser hair removal , underarm laser hair removal , facial laser hair removal and benefiting from a nutrition expert in matters related to slimming and fitness and using efficient and safe devices without any side effects in a pleasant and healthy environment along with welfare facilities is at the service of esteemed and dear clients.

  19. #19
    Join Date
    2020-Jan
    Posts
    17
    Use first password which you insert in kex manager, check root user, if you connect from pc uncheck local only.

  20. #20
    Join Date
    2020-Aug
    Posts
    1
    I had a similar problem and this is how I resolved. I could enter remotely but I was not able to click over any icon. Time to time when I enter I had a few second to click or edit, during this short period of time seems work normally.
    Without exit or close any app from my smartphone , I switched to termux app only to give it focus again. Quickly switched to Nethunter KeX and I could used for two more second! Every time I switches between apps I could use apps for two more second.
    Therefore this is a good solution.


    I thought that happend because smartphone not run batch process. Every time an app is not focused suspend its execution.
    Finnaly, in my Huawei, I set up battery/use of battery (display a list of apps)/ternux/app start (default is automatic management) and choose manual management/batch run enable.
    And this is a better solution than switch every two second beacause was a permanent solution.

  21. #21
    Join Date
    2020-Oct
    Posts
    1

    Nethunter kex failing

    Hi friends pls help me out. I install kali linux on x-tigi v18 pro and i was working well so i wanted to go back to Android and mistakenly exit termux afterwards i wanted to connect back but when i go to my nethunter kex page i received a failure message am using nethunter kex to connect as vnc desktop

  22. #22
    Join Date
    2020-Nov
    Location
    India
    Posts
    1
    I am facing similar problem too
    Yoga is for everyone. Each body is different and can benefit from breathing and movement. Even with many injuries, there is a modification that can be made to accommodate your body. Always let your instructors know what is going on with you to suggest how a posture might work.

    Learn more: https://yogateachertraininggoa.com/

  23. #23
    Join Date
    2021-Mar
    Posts
    1
    After updating to new version my kex manager is not working, when i click on start server my screen goes blank and my device restarts.

  24. #24
    Join Date
    2021-Mar
    Posts
    1
    ~ $ vncserver: No matching VNC server running for this user!
    vncserver: No matching VNC server running for this user!

    Error starting the KeX server.
    Please try "nethunter kex kill" or restart your termux session and try again.

    Stucked here...kex not starting

  25. #25
    Join Date
    2018-Jan
    Posts
    8
    Similar problem on my Samsung Note 10:

    Hi, How can resolve the below error?

    ```
    [=] Kali NetHunter for Termux installed successfully

    [+] To start Kali NetHunter, type:
    [+] nethunter # To start NetHunter CLI
    [+] nethunter kex passwd # To set the KeX password
    [+] nethunter kex & # To start NetHunter GUI
    [+] nethunter kex stop # To stop NetHunter GUI
    [+] nethunter -r # To run NetHunter as root
    [+] nh # Shortcut for nethunter

    ~ $ nethunter kex passwd
    Password:
    Verify:
    Would you like to enter a view-only password (y/n)? n
    ~ $ nethunter kex &
    [1] 31335
    ~ $ vncserver: No matching VNC server running for this user!
    vncserver: No matching VNC server running for this user!
    Error starting the KeX server.
    Please try "nethunter kex kill" or restart your termux session and try again.

    [1]+ Done nethunter kex

    ~ $ nethunter kex kill Error: /proc must be mounted
    To mount /proc at boot you need an /etc/fstab line like:
    proc /proc proc defaults
    In the meantime, run "mount proc /proc -t proc"
    ~ $ nethunter kex kill :1
    Error: /proc must be mounted
    To mount /proc at boot you need an /etc/fstab line like:
    proc /proc proc defaults
    In the meantime, run "mount proc /proc -t proc"
    ~ $ mount proc /proc -t proc
    mount: bad /etc/fstab: No such file or directory
    ~ $


    ~ $ ps -ef |grep vnc
    u0_a618 14453 8907 0 1970 pts/0 00:00:00 grep vnc
    ~ $ vncserver -kill :1
    The program vncserver is not installed. Install it by executing:
    pkg install tigervnc, after running pkg in x11-repo

    ```

    How can I get it running?

    Thank you in advance.

  26. #26
    Join Date
    2023-Mar
    Posts
    1

    I new to this and need help

    so i installed nethunter kali linux nano on my 8.1 android tablet
    then try to set nethunter kex passwd

    this comes up ..any idea how to fix?

    sudo: unable to send audit message: Operation not permitted
    /usr/bin/kex: line 25: vncpasswd: command not found

  27. #27
    Join Date
    2019-Nov
    Posts
    169
    I believe KEX is only available on the full version of NetHunter. I could be wrong however.

Similar Threads

  1. Fresh Nethunter install not working Kali Apps
    By vengir in forum Installing NetHunter
    Replies: 1
    Last Post: 2017-01-09, 11:13
  2. Replies: 1
    Last Post: 2016-06-03, 14:29
  3. Nethunter 1.1.0 on nexus 4 dont detect my external wifi
    By jonathanxx1 in forum NetHunter General Questions
    Replies: 5
    Last Post: 2015-03-29, 16:45
  4. Dont you think new version of kali linux must be out?
    By MrMilan in forum General Archive
    Replies: 1
    Last Post: 2014-04-29, 17:31

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •