Code:
[ 0.000000] Linux version 5.5.0-kali2-686-pae ([email protected]) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP Debian 5.5.17-1kali1 (2020-04-21)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6bffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6c0000-0x000000007f6d4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f6d5000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU LifeBook P7230/FJNB1C9, BIOS Version 1.11 02/27/2008
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x7f6c0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x16ffffff]
[ 0.000000] BRK [0x16c68000, 0x16c68fff] PGTABLE
[ 0.000000] BRK [0x16c69000, 0x16c6afff] PGTABLE
[ 0.000000] BRK [0x16c6b000, 0x16c6bfff] PGTABLE
[ 0.000000] BRK [0x16c6c000, 0x16c6cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31de1000-0x34ee7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5DB0 000014 (v00 FUJ )
[ 0.000000] ACPI: RSDT 0x000000007F6CD44C 000048 (v01 FUJ PC 01110000 FUJ 00000100)
[ 0.000000] ACPI: FACP 0x000000007F6D4F8C 000074 (v01 FUJ PC 01110000 FUJ 00000100)
[ 0.000000] ACPI: DSDT 0x000000007F6CD49C 006CD0 (v01 FUJ FJNB1C9 01110000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000007F6D5FC0 000040
[ 0.000000] ACPI: MCFG 0x000000007F6D416C 00003C (v01 FUJ FJNB1C9 01110000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007F6D41A8 0004DC (v01 FUJ FJNB1C9 01110000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x000000007F6D4684 000166 (v01 FUJ FJNB1C9 01110000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x000000007F6D4B07 0001D0 (v01 FUJ FJNB1C9 01110000 INTL 20050624)
[ 0.000000] ACPI: APIC 0x000000007F6D4D5C 00005A (v01 FUJ FJNB1C9 01110000 LTP 00000000)
[ 0.000000] ACPI: HPET 0x000000007F6D4DB6 000038 (v01 FUJ FJNB1C9 01110000 FUJ 00000100)
[ 0.000000] ACPI: BOOT 0x000000007F6D4DEE 000028 (v01 FUJ FJNB1C9 01110000 FUJ 00000100)
[ 0.000000] ACPI: SLIC 0x000000007F6D4E16 000176 (v01 FUJ PC 01110000 FUJ 00000100)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] BRK [0x16c6d000, 0x16c6dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000036ffdfff]
[ 0.000000] HighMem [mem 0x0000000036ffe000-0x000000007f6bffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6bffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6bffff]
[ 0.000000] On node 0 totalpages: 521822
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2160 pages used for memmap
[ 0.000000] Normal zone: 221182 pages, LIFO batch:63
[ 0.000000] HighMem zone: 296642 pages, LIFO batch:63
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu s117004 r0 d30452 u147456
[ 0.000000] pcpu-alloc: s117004 r0 d30452 u147456 alloc=36*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 519622
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.5.0-kali2-686-pae root=UUID=9e870bc0-db94-4e3d-a2d7-991d75903b08 ro quiet splash
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Initializing HighMem for node 0 (00036ffe:0007f6c0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1937032K/2087288K available (7397K kernel code, 688K rwdata, 2352K rodata, 944K init, 476K bss, 150256K reserved, 0K cma-reserved, 1186568K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
cpu_entry : 0xff400000 - 0xff961000 (5508 kB)
pkmap : 0xff000000 - 0xff200000 (2048 kB)
vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
.init : 0xd6a44000 - 0xd6b30000 ( 944 kB)
.data : 0xd67397c8 - 0xd6a32140 (3042 kB)
.text : 0xd6000000 - 0xd67397c8 (7397 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x31/0x4b0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31787 entries in 63 pages
[ 0.000000] ftrace: allocated 63 pages with 6 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20191018
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: PIT calibration matches HPET. 1 loops
[ 0.024000] tsc: Detected 1196.999 MHz processor
[ 0.000011] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x114108c456e, max_idle_ns: 440795211676 ns
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.99 BogoMIPS (lpj=4787996)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000191] LSM: Security Framework initializing
[ 0.000241] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000326] AppArmor: AppArmor initialized
[ 0.000332] TOMOYO Linux initialized
[ 0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000407] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001345] Disabled fast string operations
[ 0.001395] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.001408] process: using mwait in idle threads
[ 0.001422] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.001426] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.001434] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.001441] Spectre V2 : Mitigation: Full generic retpoline
[ 0.001444] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.001453] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.024187] Freeing SMP alternatives memory: 28K
[ 0.139949] smpboot: CPU0: Intel(R) Core(TM) Solo CPU U1400 @ 1.20GHz (family: 0x6, model: 0xe, stepping: 0xc)
[ 0.140018] Performance Events: Core events, core PMU driver.
[ 0.140018] ... version: 1
[ 0.140018] ... bit width: 40
[ 0.140018] ... generic registers: 2
[ 0.140018] ... value mask: 000000ffffffffff
[ 0.140018] ... max period: 000000007fffffff
[ 0.140018] ... fixed-purpose events: 0
[ 0.140018] ... event mask: 0000000000000003
[ 0.140018] rcu: Hierarchical SRCU implementation.
[ 0.140018] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.140018] smp: Bringing up secondary CPUs ...
[ 0.140018] smp: Brought up 1 node, 1 CPU
[ 0.140018] smpboot: Max logical packages: 1
[ 0.140018] smpboot: Total of 1 processors activated (2393.99 BogoMIPS)
[ 0.140063] devtmpfs: initialized
[ 0.140944] PM: Registering ACPI NVS region [mem 0x7f6d5000-0x7f6fffff] (176128 bytes)
[ 0.141164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.141175] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.141334] pinctrl core: initialized pinctrl subsystem
[ 0.141659] thermal_sys: Registered thermal governor 'fair_share'
[ 0.141662] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.141665] thermal_sys: Registered thermal governor 'step_wise'
[ 0.141668] thermal_sys: Registered thermal governor 'user_space'
[ 0.141990] NET: Registered protocol family 16
[ 0.142438] audit: initializing netlink subsys (disabled)
[ 0.142945] cpuidle: using governor ladder
[ 0.142949] cpuidle: using governor menu
[ 0.143108] Simple Boot Flag at 0x7b set to 0x1
[ 0.143138] ACPI: bus type PCI registered
[ 0.143145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.143327] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.143334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.143336] PCI: Using MMCONFIG for extended config space
[ 0.143339] PCI: Using configuration type 1 for base access
[ 0.147922] audit: type=2000 audit(1588909981.164:1): state=initialized audit_enabled=0 res=1
[ 0.148290] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 3.011983] ACPI: Added _OSI(Module Device)
[ 3.011988] ACPI: Added _OSI(Processor Device)
[ 3.011991] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.011995] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.012000] ACPI: Added _OSI(Linux-Dell-Video)
[ 3.012005] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 3.012010] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 3.028618] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 3.030555] ACPI: Dynamic OEM Table Load:
[ 3.030577] ACPI: SSDT 0x00000000F54CA000 000893 (v01 FUJ FJNB1C9 01110000 INTL 20050624)
[ 3.037033] ACPI: EC: EC started
[ 3.037037] ACPI: EC: interrupt blocked
[ 3.037122] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 3.037130] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 3.037136] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 3.037137] ACPI: Interpreter enabled
[ 3.037214] ACPI: (supports S0 S3 S4 S5)
[ 3.037218] ACPI: Using IOAPIC for interrupt routing
[ 3.037305] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.038042] ACPI: Enabled 12 GPEs in block 00 to 1F
[ 3.050993] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 3.058452] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.058467] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 3.058484] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 3.058495] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 3.060368] PCI host bridge to bus 0000:00
[ 3.060376] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.060382] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.060388] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.060394] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 3.060400] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 3.060406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 3.060413] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.060445] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 3.060820] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 3.060850] pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
[ 3.060863] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 3.060877] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 3.060891] pci 0000:00:02.0: reg 0x1c: [mem 0xf0400000-0xf043ffff]
[ 3.061292] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 3.061319] pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
[ 3.061734] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 3.061789] pci 0000:00:1b.0: reg 0x10: [mem 0xf0640000-0xf0643fff 64bit]
[ 3.061974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 3.062376] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 3.062600] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.063006] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 3.063229] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 3.063634] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 3.063731] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 3.064142] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 3.064239] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 3.064631] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 3.064727] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 3.065121] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 3.065218] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 3.065620] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 3.065665] pci 0000:00:1d.7: reg 0x10: [mem 0xf0644000-0xf06443ff]
[ 3.065829] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 3.066188] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 3.066692] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 3.066853] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 3.066864] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 3.066873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f)
[ 3.067255] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 3.067294] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 3.067314] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 3.067334] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 3.067354] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 3.067374] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 3.067415] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 3.067420] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 3.067425] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 3.067430] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 3.067773] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f
[ 3.067815] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7]
[ 3.067834] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7]
[ 3.067854] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf]
[ 3.067873] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3]
[ 3.067893] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 3.067913] pci 0000:00:1f.2: reg 0x24: [mem 0xf0644400-0xf06447ff]
[ 3.067993] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.068363] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 3.068467] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 3.069042] pci 0000:02:00.0: [11ab:4363] type 00 class 0x020000
[ 3.069116] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf0103fff 64bit]
[ 3.069143] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x20ff]
[ 3.069233] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 3.069392] pci 0000:02:00.0: supports D1 D2
[ 3.069398] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.069780] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 3.069791] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 3.069801] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 3.070011] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[ 3.070078] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf000ffff 64bit]
[ 3.070619] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.070645] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 3.070659] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 3.070713] pci_bus 0000:08: extended config space not accessible
[ 3.070804] pci 0000:08:03.0: [1180:0476] type 02 class 0x060700
[ 3.070843] pci 0000:08:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 3.070912] pci 0000:08:03.0: supports D1 D2
[ 3.070918] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.071091] pci 0000:08:03.1: [1180:0552] type 00 class 0x0c0010
[ 3.071128] pci 0000:08:03.1: reg 0x10: [mem 0xf0200000-0xf02007ff]
[ 3.071284] pci 0000:08:03.1: supports D1 D2
[ 3.071289] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.071455] pci 0000:08:03.2: [1180:0822] type 00 class 0x080500
[ 3.071491] pci 0000:08:03.2: reg 0x10: [mem 0xf0200800-0xf02008ff]
[ 3.071647] pci 0000:08:03.2: supports D1 D2
[ 3.071653] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.071819] pci 0000:08:03.3: [1180:0592] type 00 class 0x088000
[ 3.071855] pci 0000:08:03.3: reg 0x10: [mem 0xf0200c00-0xf0200cff]
[ 3.072010] pci 0000:08:03.3: supports D1 D2
[ 3.072026] pci 0000:08:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.072188] pci 0000:08:03.4: [1180:0852] type 00 class 0x088000
[ 3.072224] pci 0000:08:03.4: reg 0x10: [mem 0xf0201000-0xf02010ff]
[ 3.072380] pci 0000:08:03.4: supports D1 D2
[ 3.072386] pci 0000:08:03.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.072613] pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode)
[ 3.072627] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 3.072642] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 3.072649] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 3.072655] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 3.072661] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 3.072667] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 3.072673] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 3.072722] pci_bus 0000:09: extended config space not accessible
[ 3.072792] pci_bus 0000:09: busn_res: [bus 09] end can not be updated to 0c
[ 3.072803] pci 0000:00:1e.0: bridge has subordinate 09 but max busn 0c
[ 3.072842] pci_bus 0000:00: on NUMA node 0
[ 3.074321] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 3.074548] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 3.074770] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 3.074991] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 3.075211] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 3.075432] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 3.075652] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 3.075880] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 3.077396] ACPI: EC: interrupt unblocked
[ 3.077415] ACPI: EC: event unblocked
[ 3.077431] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 3.077437] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 3.077651] iommu: Default domain type: Translated
[ 3.077775] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 3.077782] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 3.077800] pci 0000:00:02.0: vgaarb: bridge control possible
[ 3.077803] vgaarb: loaded
[ 3.078056] EDAC MC: Ver: 3.0.0
[ 3.078558] PCI: Using ACPI for IRQ routing
[ 3.082073] PCI: pci_cache_line_size set to 64 bytes
[ 3.082206] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 3.082211] e820: reserve RAM buffer [mem 0x7f6c0000-0x7fffffff]
[ 3.085679] hpet: 3 channels of 0 reserved for per-cpu timers
[ 3.085688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 3.085699] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 3.087775] clocksource: Switched to clocksource tsc-early
[ 3.141509] VFS: Disk quotas dquot_6.6.0
[ 3.141566] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.142044] AppArmor: AppArmor Filesystem Enabled
[ 3.142109] pnp: PnP ACPI init
[ 3.142393] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 3.142415] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.143123] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 3.143131] system 00:01: [io 0x0800-0x080f] has been reserved
[ 3.143138] system 00:01: [io 0x1000-0x107f] has been reserved
[ 3.143145] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 3.143152] system 00:01: [io 0x1100-0x111f] has been reserved
[ 3.143159] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 3.143166] system 00:01: [io 0xf800-0xf87f] has been reserved
[ 3.143173] system 00:01: [io 0xf880-0xf8ff] has been reserved
[ 3.143180] system 00:01: [io 0xfc00-0xfc7f] has been reserved
[ 3.143187] system 00:01: [io 0xfc80-0xfcff] has been reserved
[ 3.143194] system 00:01: [io 0xfd0c-0xfd7f] has been reserved
[ 3.143201] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 3.143210] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 3.143217] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 3.143224] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.143231] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.143239] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.143246] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.143253] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.143261] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.143268] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 3.143275] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 3.143282] system 00:01: [mem 0x000cec00-0x000cefff] has been reserved
[ 3.143289] system 00:01: [mem 0xffb00000-0xffbfffff] has been reserved
[ 3.143297] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 3.143315] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.143781] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.143970] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.144120] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 3.144514] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 3.144533] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 3.145716] pnp: PnP ACPI: found 6 devices
[ 3.145724] PnPBIOS: Disabled
[ 3.186836] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.187006] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 3.187016] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 3.187025] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 3.187047] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 08-09] add_size 1000
[ 3.187095] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 3.187112] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 3.187126] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 3.187138] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 3.187153] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0120000-0xf013ffff pref]
[ 3.187160] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 3.187168] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 3.187181] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 3.187190] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 3.187204] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 3.187212] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 3.187223] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 3.187233] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 3.187263] pci 0000:08:03.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
[ 3.187281] pci 0000:08:03.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref]
[ 3.187294] pci 0000:08:03.0: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
[ 3.187300] pci 0000:08:03.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 3.187307] pci 0000:08:03.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 3.187315] pci 0000:08:03.0: CardBus bridge to [bus 09]
[ 3.187320] pci 0000:08:03.0: bridge window [io 0x4000-0x40ff]
[ 3.187329] pci 0000:08:03.0: bridge window [io 0x4400-0x44ff]
[ 3.187339] pci 0000:08:03.0: bridge window [mem 0x88000000-0x8bffffff pref]
[ 3.187348] pci 0000:08:03.0: bridge window [mem 0x8c000000-0x8fffffff]
[ 3.187358] pci 0000:00:1e.0: PCI bridge to [bus 08-09]
[ 3.187365] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 3.187376] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 3.187396] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.187402] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 3.187408] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.187413] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 3.187419] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 3.187425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff window]
[ 3.187430] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 3.187436] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 3.187441] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 3.187447] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 3.187453] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 3.187458] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 3.187464] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 3.187469] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[ 3.187475] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
[ 3.187481] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
[ 3.187486] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.187492] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 3.187498] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 3.187503] pci_bus 0000:08: resource 9 [mem 0x80000000-0xfebfffff window]
[ 3.187509] pci_bus 0000:09: resource 0 [io 0x4000-0x40ff]
[ 3.187514] pci_bus 0000:09: resource 1 [io 0x4400-0x44ff]
[ 3.187520] pci_bus 0000:09: resource 2 [mem 0x88000000-0x8bffffff pref]
[ 3.187525] pci_bus 0000:09: resource 3 [mem 0x8c000000-0x8fffffff]
[ 3.187824] NET: Registered protocol family 2
[ 3.188387] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.188408] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 3.188467] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 3.188566] TCP: Hash tables configured (established 8192 bind 8192)
[ 3.188661] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 3.188684] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 3.188820] NET: Registered protocol family 1
[ 3.188838] NET: Registered protocol family 44
[ 3.188869] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 3.193036] PCI: CLS 64 bytes, default 64
[ 3.193173] Trying to unpack rootfs image as initramfs...
[ 6.269219] Freeing initrd memory: 50204K
[ 6.269314] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.269320] software IO TLB: mapped [mem 0x2dde1000-0x31de1000] (64MB)
[ 6.270994] Initialise system trusted keyrings
[ 6.271027] Key type blacklist registered
[ 6.271195] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 6.277855] zbud: loaded
[ 6.278452] Platform Keyring initialized
[ 6.278459] Key type asymmetric registered
[ 6.278462] Asymmetric key parser 'x509' registered
[ 6.278517] bounce: pool size: 64 pages
[ 6.278551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 6.278660] io scheduler mq-deadline registered
[ 6.280569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.280620] intel_idle: does not run on family 6 model 14
[ 6.280905] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.281398] clocksource: Switched to clocksource hpet
[ 6.282268] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.282272] ACPI: Thermal Zone [TZ00] (27 C)
[ 6.282951] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.282955] ACPI: Thermal Zone [TZ01] (27 C)
[ 6.283154] isapnp: Scanning for PnP cards...
[ 6.637572] isapnp: No Plug & Play device found
[ 6.637802] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.639505] Linux agpgart interface v0.103
[ 6.640401] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.642596] i8042: Detected active multiplexing controller, rev 1.1
[ 6.644008] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.644048] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 6.644170] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 6.644278] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 6.644383] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 6.644797] mousedev: PS/2 mouse device common for all mice
[ 6.644933] rtc_cmos 00:02: RTC can wake from S4
[ 6.645411] rtc_cmos 00:02: registered as rtc0
[ 6.645484] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.645512] intel_pstate: CPU model not supported
[ 6.645546] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.646438] drop_monitor: Initializing network drop monitor service
[ 6.647196] NET: Registered protocol family 10
[ 6.677427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 6.691128] Segment Routing with IPv6
[ 6.691215] mip6: Mobile IPv6
[ 6.691221] NET: Registered protocol family 17
[ 6.691336] mpls_gso: MPLS GSO support
[ 6.691810] microcode: sig=0x6ec, pf=0x20, revision=0x54
[ 6.691821] microcode: Microcode Update Driver: v2.2.
[ 6.691830] IPI shorthand broadcast: enabled
[ 6.692076] registered taskstats version 1
[ 6.692082] Loading compiled-in X.509 certificates
[ 7.354024] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 7.354107] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 7.354168] zswap: loaded using pool lzo/zbud
[ 7.354496] Key type ._fscrypt registered
[ 7.354499] Key type .fscrypt registered
[ 7.354559] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.355435] rtc_cmos 00:02: setting system clock to 2020-05-08T03:53:08 UTC (1588909988)
[ 7.355563] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 7.359894] Freeing unused kernel image (initmem) memory: 944K
[ 7.364227] Write protecting kernel text and read-only data: 9752k
[ 7.364230] NX-protecting the kernel data: 4888k
[ 7.365726] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 7.365892] x86/mm: Checking user space page tables
[ 7.366314] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 7.366317] Run /init as init process
[ 8.016299] button: module verification failed: signature and/or required key missing - tainting kernel
[ 8.021818] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 8.022562] ACPI: Lid Switch [LID]
[ 8.025178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 8.025261] ACPI: Power Button [PWRB]
[ 8.026455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 8.030195] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.032152] ACPI: Power Button [PWRF]
[ 8.045724] acpi device:01: registered as cooling_device1
[ 8.045921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 8.121608] battery: ACPI: Battery Slot [CMB1] (battery present)
[ 8.121819] battery: ACPI: Battery Slot [CMB2] (battery absent)
[ 8.145679] sky2: driver version 1.30
[ 8.146029] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 8.146855] sky2 0000:02:00.0 eth0: addr 00:17:42:43:ef:de
[ 8.174705] ACPI: bus type USB registered
[ 8.174781] usbcore: registered new interface driver usbfs
[ 8.174814] usbcore: registered new interface driver hub
[ 8.189069] usbcore: registered new device driver usb
[ 8.202034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.203703] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.205670] ehci-pci: EHCI PCI platform driver
[ 8.214644] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x0000000000001066 (\_SB.PCI0.LPCB.OPIO) (20191018/utaddress-204)
[ 8.214664] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPCB.PMIO) (20191018/utaddress-204)
[ 8.214683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.215172] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 8.215194] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 8.215222] ehci-pci 0000:00:1d.7: debug port 1
[ 8.219166] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 8.219415] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20191018/utaddress-204)
[ 8.219434] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.219532] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20191018/utaddress-204)
[ 8.219545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.219548] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.221363] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0644000
[ 8.228902] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 8.232755] sdhci: Secure Digital Host Controller Interface driver
[ 8.232758] sdhci: Copyright(c) Pierre Ossman
[ 8.236091] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.236282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 8.236288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.236293] usb usb1: Product: EHCI Host Controller
[ 8.236298] usb usb1: Manufacturer: Linux 5.5.0-kali2-686-pae ehci_hcd
[ 8.236303] usb usb1: SerialNumber: 0000:00:1d.7
[ 8.236688] hub 1-0:1.0: USB hub found
[ 8.236714] hub 1-0:1.0: 8 ports detected
[ 8.237432] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.237451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.237466] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 8.237512] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 8.237707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 8.237713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.237718] usb usb2: Product: UHCI Host Controller
[ 8.237723] usb usb2: Manufacturer: Linux 5.5.0-kali2-686-pae uhci_hcd
[ 8.237728] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.238075] hub 2-0:1.0: USB hub found
[ 8.238104] hub 2-0:1.0: 2 ports detected
[ 8.238972] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.238993] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 8.239011] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 8.239065] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 8.239220] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 8.239226] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.239231] usb usb3: Product: UHCI Host Controller
[ 8.239235] usb usb3: Manufacturer: Linux 5.5.0-kali2-686-pae uhci_hcd
[ 8.239240] usb usb3: SerialNumber: 0000:00:1d.1
[ 8.239583] hub 3-0:1.0: USB hub found
[ 8.239607] hub 3-0:1.0: 2 ports detected
[ 8.240485] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.240499] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 8.240513] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 8.240562] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 8.240735] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 8.240742] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.240746] usb usb4: Product: UHCI Host Controller
[ 8.240751] usb usb4: Manufacturer: Linux 5.5.0-kali2-686-pae uhci_hcd
[ 8.240756] usb usb4: SerialNumber: 0000:00:1d.2
[ 8.241088] hub 4-0:1.0: USB hub found
[ 8.241113] hub 4-0:1.0: 2 ports detected
[ 8.241919] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.241934] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 8.241948] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 8.241998] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 8.243196] SCSI subsystem initialized
[ 8.258330] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 8.258338] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.258344] usb usb5: Product: UHCI Host Controller
[ 8.258349] usb usb5: Manufacturer: Linux 5.5.0-kali2-686-pae uhci_hcd
[ 8.258353] usb usb5: SerialNumber: 0000:00:1d.3
[ 8.258766] hub 5-0:1.0: USB hub found
[ 8.258792] hub 5-0:1.0: 2 ports detected
[ 8.271428] sdhci-pci 0000:08:03.2: SDHCI controller found [1180:0822] (rev 17)
[ 8.271677] sdhci-pci 0000:08:03.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.271698] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 8.282037] sdhci-pci 0000:08:03.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.287842] sdhci-pci 0000:08:03.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.287869] mmc0: SDHCI controller on PCI [0000:08:03.2] using DMA
[ 8.288134] libata version 3.00 loaded.
[ 8.292346] ata_piix 0000:00:1f.1: version 2.13
[ 8.304995] scsi host0: ata_piix
[ 8.315229] scsi host1: ata_piix
[ 8.315452] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 8.315457] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 8.315950] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 8.319000] ata2: port disabled--ignoring
[ 8.352130] firewire_ohci 0000:08:03.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 8.478277] ata1.00: ATA-9: KingSpec KSD-CF18.6-032MS, 20131216, max UDMA/133
[ 8.478284] ata1.00: 62377984 sectors, multi 0: LBA48
[ 8.483357] scsi 0:0:0:0: Direct-Access ATA KingSpec KSD-CF1 1216 PQ: 0 ANSI: 5
[ 8.489412] scsi host2: ata_piix
[ 8.489771] pci 0000:00:00.0: Intel 945GM Chipset
[ 8.489821] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 8.490402] pci 0000:00:00.0: detected 8192K stolen memory
[ 8.490606] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 8.491618] Console: switching to colour dummy device 80x25
[ 8.501161] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.501165] [drm] Driver supports precise vblank timestamp query.
[ 8.501197] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:01 [mem 0x000cec00-0x000cefff]
[ 8.501207] caller pci_map_rom+0x74/0x17c mapping multiple BARs
[ 8.501983] scsi host3: ata_piix
[ 8.502207] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 8.502212] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 8.504692] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.528090] [drm] Initialized overlay support.
[ 8.533092] [drm] Initialized i915 1.6.0 20191101 for 0000:00:02.0 on minor 0
[ 8.646139] fbcon: i915drmfb (fb0) is primary device
[ 8.671980] ata3.01: NODEV after polling detection
[ 8.674463] ata3.00: ATAPI: UJDA765 DVD/CDRW, 1.90, max UDMA/33
[ 8.674471] ata3.00: applying bridge limits
[ 8.681141] scsi 2:0:0:0: CD-ROM MATSHITA UJDA765 DVD/CDRW 1.90 PQ: 0 ANSI: 5
[ 8.776064] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 8.831023] random: fast init done
[ 8.872236] firewire_core 0000:08:03.1: created device fw0: GUID 00000e1003c48ca9, S400
[ 9.000135] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x202000/0x0/0x0, board id: 0, fw id: 58277
[ 9.040772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 9.168131] usb 3-2: New USB device found, idVendor=08ff, idProduct=2580, bcdDevice= 6.23
[ 9.168137] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.168142] usb 3-2: Product: Fingerprint Sensor
[ 9.472063] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 9.525935] usb 1-5: New USB device found, idVendor=046d, idProduct=09b2, bcdDevice= 0.06
[ 9.525941] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9.525946] usb 1-5: Product: OEM Camera
[ 9.848293] Console: switching to colour frame buffer device 160x48
[ 9.880043] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 9.920144] sd 0:0:0:0: [sda] 62377984 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 9.920191] sd 0:0:0:0: [sda] Write Protect is off
[ 9.920198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.920274] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.922631] sda: sda1 sda2 < sda5 sda6 >
[ 9.923829] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.937401] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 9.937406] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.938048] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 10.580076] PM: Image not found (code -22)
[ 11.314257] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.595734] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 11.842250] systemd[1]: Inserted module 'autofs4'
[ 11.889895] systemd[1]: systemd 245.4-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 11.908195] systemd[1]: Detected architecture x86.
[ 11.916858] systemd[1]: Set hostname to <purpledrank>.
[ 12.714140] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 12.976808] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.979606] systemd[1]: Created slice system-getty.slice.
[ 12.979797] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.980794] systemd[1]: Created slice system-modprobe.slice.
[ 12.980879] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.981791] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 12.983271] systemd[1]: Created slice User and Session Slice.
[ 12.983593] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.984526] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.984935] systemd[1]: Reached target Slices.
[ 12.985872] systemd[1]: Listening on Syslog Socket.
[ 12.986341] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.986638] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.987462] systemd[1]: Listening on Journal Audit Socket.
[ 12.987951] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.988705] systemd[1]: Listening on Journal Socket.
[ 12.989218] systemd[1]: Listening on udev Control Socket.
[ 12.989632] systemd[1]: Listening on udev Kernel Socket.
[ 12.993531] systemd[1]: Mounting Huge Pages File System...
[ 12.999617] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.019786] systemd[1]: Mounting RPC Pipe File System...
[ 13.043973] systemd[1]: Mounting Kernel Debug File System...
[ 13.062987] systemd[1]: Mounting Kernel Trace File System...
[ 13.063300] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 13.087930] systemd[1]: Starting Set the console keyboard layout...
[ 13.113377] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 13.113608] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 13.117921] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 13.118060] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 13.158526] systemd[1]: Starting Journal Service...
[ 13.180891] systemd[1]: Starting Load Kernel Modules...
[ 13.194274] RPC: Registered named UNIX socket transport module.
[ 13.194278] RPC: Registered udp transport module.
[ 13.194280] RPC: Registered tcp transport module.
[ 13.194283] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.204860] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.224782] systemd[1]: Starting udev Coldplug all Devices...
[ 13.274716] systemd[1]: Mounted Huge Pages File System.
[ 13.275517] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.284443] systemd[1]: Mounted RPC Pipe File System.
[ 13.285174] systemd[1]: Mounted Kernel Debug File System.
[ 13.285780] systemd[1]: Mounted Kernel Trace File System.
[ 13.300144] systemd[1]: Finished Set the console keyboard layout.
[ 13.320234] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 13.347850] systemd[1]: Finished Load Kernel Modules.
[ 13.349045] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 13.349484] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 13.370749] systemd[1]: Starting Apply Kernel Variables...
[ 13.412068] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.432161] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 13.436827] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 13.436994] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 13.457911] systemd[1]: Starting Load/Save Random Seed...
[ 13.472735] systemd[1]: Starting Create System Users...
[ 13.544108] systemd[1]: Finished Apply Kernel Variables.
[ 13.668352] systemd[1]: Finished Create System Users.
[ 13.685898] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.855549] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 13.856359] systemd[1]: Reached target Local File Systems (Pre).
[ 13.874077] systemd[1]: Starting udev Kernel Device Manager...
[ 14.329362] systemd[1]: Finished udev Coldplug all Devices.
[ 14.342516] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 14.391818] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 14.588558] systemd[1]: Started udev Kernel Device Manager.
[ 14.599666] systemd[1]: Starting Show Plymouth Boot Screen...
[ 14.794552] systemd[1]: Started Show Plymouth Boot Screen.
[ 14.795249] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 14.795740] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 14.795875] systemd[1]: Reached target Local Encrypted Volumes.
[ 14.795992] systemd[1]: Reached target Paths.
[ 15.459626] ACPI: AC Adapter [AC] (off-line)
[ 15.471672] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
[ 15.472698] ACPI: \_SB_.FEXT: BTNI: [0xc0101]
[ 15.472805] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input13
[ 15.483685] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 15.923392] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
[ 15.996933] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
[ 16.040062] random: crng init done
[ 16.040067] random: 7 urandom warning(s) missed due to ratelimiting
[ 16.102830] yenta_cardbus 0000:08:03.0: CardBus bridge found [10cf:1254]
[ 16.104174] r592: driver successfully loaded
[ 16.116966] intel_rng: FWH not detected
[ 16.117303] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.119800] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 16.155419] leds_ss4200: no LED devices found
[ 16.207081] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 16.209579] systemd[1]: Finished Load/Save Random Seed.
[ 16.240886] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 16.240892] yenta_cardbus 0000:08:03.0: Socket status: 30000820
[ 16.240903] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 16.240908] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
[ 16.242292] excluding 0x4000-0x40ff 0x4400-0x44ff
[ 16.247307] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.250752] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.251709] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 16.254385] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 16.257130] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 16.272862] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
[ 16.323067] iTCO_vendor_support: vendor-support=0
[ 16.326038] r852: Non dma capable device detected, dma disabled
[ 16.326062] r852: driver loaded successfully
[ 16.338466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.338545] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 16.338739] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.339249] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff]
[ 16.339255] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0200000-0xf02fffff:
[ 16.339264] excluding 0xf0200000-0xf020ffff
[ 16.373039] systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:acpi_video0.
[ 16.577984] mc: Linux media interface: v0.10
[ 16.578705] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 16.671080] videodev: Linux video capture interface: v2.00
[ 16.671935] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.672234] ath5k 0000:03:00.0: registered as 'phy0'
[ 16.690187] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 16.690193] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 16.690197] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 16.690200] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 16.690204] snd_hda_codec_idt hdaudioC0D0: dig-out=0x21/0x0
[ 16.690206] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 16.690211] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x13
[ 16.690214] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 16.727916] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 16.823609] systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:intel_backlight.
[ 16.852248] uvcvideo: Found UVC 1.00 device OEM Camera (046d:09b2)
[ 16.890776] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized!
[ 16.890783] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 16.890787] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 16.890791] uvcvideo 1-5:1.0: Entity type for entity Extension 13 was not initialized!
[ 16.890795] uvcvideo 1-5:1.0: Entity type for entity Extension 12 was not initialized!
[ 16.890798] uvcvideo 1-5:1.0: Entity type for entity Extension 10 was not initialized!
[ 16.890974] input: OEM Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input16
[ 16.891138] usbcore: registered new interface driver uvcvideo
[ 16.891140] USB Video Class driver (1.1.1)
[ 17.114037] kvm: disabled by bios
[ 17.172671] intel_powerclamp: No package C-state available
[ 17.300110] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 17.300155] pci 0000:09:00.0: [168c:0023] type 00 class 0x028000
[ 17.300194] pci 0000:09:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 17.300502] pci 0000:09:00.0: BAR 0: assigned [mem 0x8c000000-0x8c00ffff]
[ 17.736622] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 17.736775] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 17.736913] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 17.737056] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 17.955282] systemd[1]: Found device KingSpec_KSD-CF18.6-032MS 6.
[ 17.963024] ath9k 0000:09:00.0: enabling device (0000 -> 0002)
[ 18.491413] systemd[1]: Found device KingSpec_KSD-CF18.6-032MS 5.
[ 18.493542] systemd[1]: Started Journal Service.
[ 18.548973] ath: EEPROM regdomain: 0x809c
[ 18.548976] ath: EEPROM indicates we should expect a country code
[ 18.548978] ath: doing EEPROM country->regdmn map search
[ 18.548980] ath: country maps to regdmn code: 0x52
[ 18.548982] ath: Country alpha2 being used: CN
[ 18.548983] ath: Regpair used: 0x52
[ 18.564457] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 18.567413] ieee80211 phy1: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf7990000, irq=16
[ 18.662242] Adding 2085884k swap on /dev/sda5. Priority:-2 extents:1 across:2085884k SSFS
[ 18.678198] ath: EEPROM regdomain: 0x3a
[ 18.678202] ath: EEPROM indicates we should expect a direct regpair map
[ 18.678204] ath: Country alpha2 being used: BM
[ 18.678206] ath: Regpair used: 0x3a
[ 18.678898] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.682025] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
[ 18.785865] systemd-journald[244]: Received client request to flush runtime journal.
[ 18.797836] systemd-journald[244]: File /var/log/journal/3d6a4e1c95f94d8da96c497f6133362b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 19.690943] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 23.000211] sky2 0000:02:00.0 eth0: enabling interface
[ 25.316103] fuse: init (API version 7.31)
[ 48.615102] systemd-journald[244]: File /var/log/journal/3d6a4e1c95f94d8da96c497f6133362b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 66.192077] usb 1-5: reset high-speed USB device number 3 using ehci-pci
[ 70.907683] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 70.948040] ath: phy1: Failed to wakeup in 500us
[ 71.033939] ath: phy1: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 71.147067] ath: phy1: Chip reset failed
[ 79.572080] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 79.572122] pci 0000:09:00.0: [168c:0023] type 00 class 0x028000
[ 79.572168] pci 0000:09:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 79.572588] pci 0000:09:00.0: BAR 0: assigned [mem 0x8c000000-0x8c00ffff]
[ 79.572719] ath9k 0000:09:00.0: enabling device (0000 -> 0002)
[ 80.030374] ath: EEPROM regdomain: 0x809c
[ 80.030377] ath: EEPROM indicates we should expect a country code
[ 80.030379] ath: doing EEPROM country->regdmn map search
[ 80.030381] ath: country maps to regdmn code: 0x52
[ 80.030383] ath: Country alpha2 being used: CN
[ 80.030384] ath: Regpair used: 0x52
[ 80.045362] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 80.064400] ieee80211 phy2: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf7990000, irq=16
[ 312.633920] wlan1: authenticate with 8a:8a:20:2b:fe:9c
[ 312.645981] wlan1: send auth to 8a:8a:20:2b:fe:9c (try 1/3)
[ 312.651654] wlan1: authenticated
[ 312.668065] wlan1: associate with 8a:8a:20:2b:fe:9c (try 1/3)
[ 312.672904] wlan1: RX AssocResp from 8a:8a:20:2b:fe:9c (capab=0x411 status=0 aid=5)
[ 312.673033] wlan1: associated
[ 312.852107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
if I disconnect wlan1 then try to connect wlan0 via the wpa_cli this is what I get:
PCMCIA Wireless Adapter unable to connect to network
