Results 1 to 3 of 3

Thread: [HELP] Fingerprint Sensor Install

  1. #1
    Join Date
    2013-Mar
    Posts
    4

    [HELP] Fingerprint Sensor Install

    Hi

    I have a Flybook VM with a built-in fingerprint sensor.
    I can't find any information online on how to put it to work.
    Can anyone help me?

    Here is the info on the device.
    Code:
    root@kali:~# lsusb -vd 08ff:2580
    
    Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               1.10
      bDeviceClass          255 Vendor Specific Class
      bDeviceSubClass       255 Vendor Specific Subclass
      bDeviceProtocol       255 Vendor Specific Protocol
      bMaxPacketSize0         8
      idVendor           0x08ff AuthenTec, Inc.
      idProduct          0x2580 AES2501 Fingerprint Sensor
      bcdDevice            6.23
      iManufacturer           0 
      iProduct                1 Fingerprint Sensor
      iSerial                 0 
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           32
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0xa0
          (Bus Powered)
          Remote Wakeup
        MaxPower              100mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass       255 Vendor Specific Class
          bInterfaceSubClass    255 Vendor Specific Subclass
          bInterfaceProtocol    255 Vendor Specific Protocol
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0020  1x 32 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0008  1x 8 bytes
            bInterval               0
    Device Status:     0x0000
      (Bus Powered)
    Thanks

  2. #2
    Join Date
    2013-Mar
    Posts
    2
    May be this article could help you:

    http://www.kubuntu-es.org/wiki/segur...entrar-sistema

    Good luck!

  3. #3
    Join Date
    2013-Mar
    Posts
    4
    Going to look into it. Will post result. Thank you

Similar Threads

  1. enable fingerprint login biometric security
    By careyjames in forum General Archive
    Replies: 1
    Last Post: 2022-07-16, 02:47
  2. Goodix Fingerprint Driver for Kali Linux
    By hansana_A in forum Development Archive
    Replies: 0
    Last Post: 2021-11-16, 07:52
  3. Touchscreen and Fingerprint drivers
    By acron in forum Installing Archive
    Replies: 0
    Last Post: 2015-12-13, 07:21

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •