Results 1 to 6 of 6

Thread: Troubleshooting installing nvidia driver for Geforce RTX 2080

  1. #1
    Join Date
    2022-Oct
    Posts
    3

    Troubleshooting installing nvidia driver for Geforce RTX 2080

    Hi everyone,

    I installed a dual-boot of Kali with Mint by following the docs, and then followed the "Install NVIDIA GPU Drivers" page. Nouveau keeps causing random crashes. Unfortunately after installing nvidia-driver and nvidia-cuda-toolkit only the nouveau module is being loaded. Secure Boot is disabled. I could only find troubleshooting for other distros on Google; does anyone know how I should begin figuring this out?

    I tried blacklisting nouveau by editing the GRUB menu and adding "rdblacklist=nouveau" as a parameter; also placed a config file in modprobe.d/. After rebooting, kali crashes soon after the boot menu (before GUI) and doesn't respond to commands. Had to fresh install.

    Code:
    $ lspci | grep -i vga
    01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080 Rev. A] (rev a1)
                                                                                                                                                                                                                                                
    lspci -s 01:00.0 -v
    01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080 Rev. A] (rev a1) (prog-if 00 [VGA controller])
            Subsystem: Dell TU104 [GeForce RTX 2080 Rev. A]
            Flags: bus master, fast devsel, latency 0, IRQ 145, IOMMU group 1
            Memory at eb000000 (32-bit, non-prefetchable) [size=16M]
            Memory at a0000000 (64-bit, prefetchable) [size=256M]
            Memory at b0000000 (64-bit, prefetchable) [size=32M]
            I/O ports at e000 [size=128]
            Expansion ROM at 000c0000 [disabled] [size=128K]
            Capabilities: <access denied>
            Kernel driver in use: nouveau
            Kernel modules: nouveau, nvidia_tesla_drm, nvidia_current_drm, nvidia_tesla, nvidia_current
    Output of nvidia-smi:

    Code:
    $ nvidia-smi
    NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.
    Output of clinfo:

    Code:
    $ clinfo
    Number of platforms                               1
      Platform Name                                   Portable Computing Language
      Platform Vendor                                 The pocl project
      Platform Version                                OpenCL 3.0 PoCL 3.0+debian  Linux, None+Asserts, RELOC, LLVM 13.0.1, SLEEF, DISTRO, POCL_DEBUG
      Platform Profile                                FULL_PROFILE
      Platform Extensions                             cl_khr_icd cl_pocl_content_size
      Platform Extensions with Version                cl_khr_icd                                                       0x400000 (1.0.0)
                                                      cl_pocl_content_size                                             0x400000 (1.0.0)
      Platform Numeric Version                        0xc00000 (3.0.0)
      Platform Extensions function suffix             POCL
      Platform Host timer resolution                  0ns
    
      Platform Name                                   Portable Computing Language
    Number of devices                                 1
      Device Name                                     pthread-Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
      Device Vendor                                   GenuineIntel
      Device Vendor ID                                0x8086
      Device Version                                  OpenCL 1.2 PoCL HSTR: pthread-x86_64-pc-linux-gnu-haswell
      Driver Version                                  3.0+debian
      Device OpenCL C Version                         OpenCL C 1.2 PoCL
      Device Type                                     CPU
      Device Profile                                  FULL_PROFILE
      Device Available                                Yes
      Compiler Available                              Yes
      Linker Available                                Yes
      Max compute units                               12
      Max clock frequency                             4600MHz
      Device Partition                                (core)
        Max number of sub-devices                     12
        Supported partition types                     equally, by counts
        Supported affinity domains                    (n/a)
      Max work item dimensions                        3
      Max work item sizes                             4096x4096x4096
      Max work group size                             4096
      Preferred work group size multiple (kernel)     8
      Preferred / native vector sizes                 
        char                                                16 / 16      
        short                                               16 / 16      
        int                                                  8 / 8       
        long                                                 4 / 4       
        half                                                 0 / 0        (n/a)
        float                                                8 / 8       
        double                                               4 / 4        (cl_khr_fp64)
      Half-precision Floating-point support           (n/a)
      Single-precision Floating-point support         (core)
        Denormals                                     Yes
        Infinity and NANs                             Yes
        Round to nearest                              Yes
        Round to zero                                 Yes
        Round to infinity                             Yes
        IEEE754-2008 fused multiply-add               Yes
        Support is emulated in software               No
        Correctly-rounded divide and sqrt operations  Yes
      Double-precision Floating-point support         (cl_khr_fp64)
        Denormals                                     Yes
        Infinity and NANs                             Yes
        Round to nearest                              Yes
        Round to zero                                 Yes
        Round to infinity                             Yes
        IEEE754-2008 fused multiply-add               Yes
        Support is emulated in software               No
      Address bits                                    64, Little-Endian
      Global memory size                              14445117440 (13.45GiB)
      Error Correction support                        No
      Max memory allocation                           4294967296 (4GiB)
      Unified memory for Host and Device              Yes
      Minimum alignment for any data type             128 bytes
      Alignment of base address                       1024 bits (128 bytes)
      Global Memory cache type                        Read/Write
      Global Memory cache size                        12582912 (12MiB)
      Global Memory cache line size                   64 bytes
      Image support                                   Yes
        Max number of samplers per kernel             16
        Max size for 1D images from buffer            268435456 pixels
        Max 1D or 2D image array size                 2048 images
        Max 2D image size                             16384x16384 pixels
        Max 3D image size                             2048x2048x2048 pixels
        Max number of read image args                 128
        Max number of write image args                128
      Local memory type                               Global
      Local memory size                               262144 (256KiB)
      Max number of constant args                     8
      Max constant buffer size                        262144 (256KiB)
      Max size of kernel argument                     1024
      Queue properties                                
        Out-of-order execution                        Yes
        Profiling                                     Yes
      Prefer user sync for interop                    Yes
      Profiling timer resolution                      1ns
      Execution capabilities                          
        Run OpenCL kernels                            Yes
        Run native kernels                            Yes
      printf() buffer size                            16777216 (16MiB)
      Built-in kernels                                (n/a)
      Device Extensions                               cl_khr_byte_addressable_store cl_khr_global_int32_base_atomics   cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics   cl_khr_local_int32_extended_atomics cl_khr_3d_image_writes cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_fp64
    
    NULL platform behavior
      clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...)  Portable Computing Language
      clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...)   Success [POCL]
      clCreateContext(NULL, ...) [default]            Success [POCL]
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT)  Success (1)
        Platform Name                                 Portable Computing Language
        Device Name                                   pthread-Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU)  Success (1)
        Platform Name                                 Portable Computing Language
        Device Name                                   pthread-Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU)  No devices found in platform
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR)  No devices found in platform
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM)  No devices found in platform
      clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL)  Success (1)
        Platform Name                                 Portable Computing Language
        Device Name                                   pthread-Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
    
    ICD loader properties
      ICD loader Name                                 OpenCL ICD Loader
      ICD loader Vendor                               OCL Icd free software
      ICD loader Version                              2.3.1
      ICD loader Profile                              OpenCL 3.0
    Code:
    dpkg -l | grep -i icd 
    ii  nvidia-egl-icd:amd64                   470.141.03-2                        amd64        NVIDIA EGL installable client driver (ICD)
    ii  nvidia-vulkan-icd:amd64                470.141.03-2                        amd64        NVIDIA Vulkan installable client driver (ICD)
    ii  ocl-icd-libopencl1:amd64               2.3.1-1                             amd64        Generic OpenCL ICD Loader
    ii  ocl-icd-opencl-dev:amd64               2.3.1-1                             amd64        OpenCL development files
    ii  pocl-opencl-icd:amd64                  3.0-6                               amd64        pocl ICD
    Device: Alienware Aurora R7

  2. #2
    Join Date
    2021-May
    Location
    UK
    Posts
    772
    Create the /etc/modprobe.d/blacklist-nouveau.conf file and add the following information to the file; (sounds like you did this)

    • blacklist nouveau
      options nouveau modeset=0


      Then Re-generate initramfs; (not sure you did this after?)

      $sudo update-initramfs -u

  3. #3
    Join Date
    2021-May
    Location
    UK
    Posts
    772
    Of courtse you could also try removing nouveau completely;

    sudo apt-get --purge remove xserver-xorg-video-nouveau

  4. #4
    Join Date
    2022-Oct
    Posts
    3
    Thanks, Fred. Even after updating initramfs it still boots up to an unresponsive screen. update-initramfs gives some missing firmware warnings:

    Code:
    sudo update-initramfs -u                       
    update-initramfs: Generating /boot/initrd.img-5.18.0-kali7-amd64
    W: Possible missing firmware /lib/firmware/i915/skl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/bxt_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/kbl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/glk_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/kbl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/kbl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/cml_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/icl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/ehl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/ehl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/tgl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/tgl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/dg1_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/tgl_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/adlp_guc_69.0.3.bin for module i915
    W: Possible missing firmware /lib/firmware/i915/adlp_dmc_ver2_14.bin for module i915
    The firmware-misc package does not have v69 firmware, so I tried this: https://wiki.debian.org/Firmware#Fir...ng_from_Debian

    Which brought me on reboot to a black screen with a blinking cursor in the corner. Ctrl-alt-1-6 respond and I can get shell access. Also, nvidia-smi is seeing my card now. Am I on the right track? Should I now try troubleshooting XServer?

  5. #5
    Join Date
    2021-May
    Location
    UK
    Posts
    772

  6. #6
    Join Date
    2022-Oct
    Posts
    3
    Thanks very much! I followed the second method, wild guessed that my driver should be 525.60.11, and it worked.

Similar Threads

  1. Kali Linux 2023 - Nvidia Geforce Go 7300 - nvidia driver 304
    By madvinegar in forum General Archive
    Replies: 1
    Last Post: 2023-01-21, 19:14
  2. GeForce RTX 3050 nvidia driver
    By knoel in forum TroubleShooting Archive
    Replies: 2
    Last Post: 2022-09-01, 14:59
  3. Nvidia GeForce 8400 GS driver installation fails.
    By roosterkun in forum TroubleShooting Archive
    Replies: 2
    Last Post: 2017-12-19, 09:24

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •