I've just got a new Alfa AWUS036NH (fake according to Alfa Network support) USB adapter and i'm having some injection + wash scan problems...
Device photos:
IMG_6701.jpg
IMG_6704.jpg
IMG_6700.jpg
IMG_6703.jpg
I'm running Kali v2.0 USB Persistence.
Just after the restart everything is ok
wlan2 is the alfa adapter
Code:
root@kali:~# airmon-ng check kill
Killing these processes:
PID Name
1473 wpa_supplicant
1565 dhclient
root@kali:~# iwconfig
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=30 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
wlan2 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=33 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
root@kali:~# airmon-ng start wlan2
PHY Interface Driver Chipset
phy0 wlan0 b43 non-mac80211 device? (report this!)
phy1 wlan2 rt2800usb Ralink Technology, Corp. RT2870/RT3070
(mac80211 monitor mode vif enabled for [phy1]wlan2 on [phy1]wlan2mon)
(mac80211 station mode vif disabled for [phy1]wlan2)
root@kali:~# aireplay-ng -9 wlan2mon
19:45:54 Trying broadcast probe requests...
19:45:54 Injection is working!
19:45:56 Found 1 AP
19:47:27 Trying directed probe requests...
19:47:27 XX:XX:XX:XX:XX:XX - channel: 11 - 'test'
19:47:27 Ping (min/avg/max): 2.103ms/11.600ms/25.750ms Power: -46.20
19:47:27 30/30: 100%
but when i disable monitor mode and enable again
Code:
root@kali:~# airmon-ng stop wlan2mon
PHY Interface Driver Chipset
phy0 wlan0 b43 non-mac80211 device? (report this!)
phy1 wlan2mon rt2800usb Ralink Technology, Corp. RT2870/RT3070
cat: /sys/class/ieee80211/phy1/device/net/wlan2/type: No such file or directory
(mac80211 station mode vif enabled on [phy1]wlan2)
(mac80211 monitor mode vif disabled for [phy1]wlan2mon)
root@kali:~# airmon-ng
PHY Interface Driver Chipset
phy0 wlan0 b43 non-mac80211 device? (report this!)
phy1 wlan3 rt2800usb Ralink Technology, Corp. RT2870/RT3070
root@kali:~# airmon-ng check kill
root@kali:~# airmon-ng start wlan3
PHY Interface Driver Chipset
phy0 wlan0 b43 non-mac80211 device? (report this!)
phy1 wlan3 rt2800usb Ralink Technology, Corp. RT2870/RT3070
(mac80211 monitor mode vif enabled for [phy1]wlan3 on [phy1]wlan3mon)
(mac80211 station mode vif disabled for [phy1]wlan3)
for some reason it becomes wlan3, and injection stops working
Code:
root@kali:~# aireplay-ng -9 wlan3mon
19:48:25 Trying broadcast probe requests...
19:48:27 No Answer...
19:48:27 Found 1 AP
19:48:27 Trying directed probe requests...
19:48:27 XX:XX:XX:XX:XX:XX - channel: 11 - 'test'
19:48:33 0/30: 0%
Trying to run wash scan:
Code:
root@kali:~# wash -i wlan3mon
Wash v1.5.2 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>
mod by t6_x <[email protected]> & DataHead & Soxrok2212
BSSID Channel RSSI WPS Version WPS Locked ESSID
---------------------------------------------------------------------------------------------------------------
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
[!] Found packet with bad FCS, skipping...
Some related demsg
Code:
[ 20.621485] usbcore: registered new interface driver rt2800usb
[ 20.923092] rt2800usb 4-1:1.0 wlan2: renamed from wlan1
[ 28.330826] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 28.371656] rt2800usb 4-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 28.384248] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 178.349792] device wlan2mon entered promiscuous mode
[ 307.986854] rt2800usb 4-1:1.0 wlan3: renamed from wlan2
[ 307.987177] systemd-udevd[2618]: renamed network interface wlan2 to wlan3
If i do all the steps above with wlan0, everything works fine (b43 firmware is perfect)...
Seems to be a buggy RT3070 firmware.
Does anyone knows how to get a fixed firmware for this device or fix these issues ?
Thanks !