(Guide) Installing Nvidia + Bumblebee + CUDA for Optimus enabled Laptops

[staticn0de]

staticn0de, not sure if I can thank you enough for all the effort you put into this.

Out of curiosity, is there a way to perform these installations without breaking the Intel driver as bahha pointed out?
(And maybe update his method of how to fix it?)

Thanks!

I've never had the Intel driver break. Have you tried this install with Kali 1.1.0?

Have you had the driver break on you? if it does, please post output from dmesg

[Rarity]

I've never had the Intel driver break. Have you tried this install with Kali 1.1.0?

Have you had the driver break on you? if it does, please post output from dmesg

Yes, I just performed the install on 1.1.0a before posting this. Optirun works as it should but when I run glxgears I get this error:

Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual

dmesg output:

[ 9760.524958] nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
[ 9760.526928] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.526970] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.526993] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527013] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527033] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527053] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527085] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527105] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.527451] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9760.711896] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)

[staticn0de]

@Rarity

What are the contents of your /etc/bumblebee/xorg.conf.nvidia file?

Do you have any other monitors connected to your laptop?

Toggle bumblebee with the following and post dmesg

# tee /proc/acpi/bbswitch <<<OFF
# tee /proc/acpi/bbswitch <<<ON

Did you use option glxspheres?

What version of CUDA are you running?

[Ramrsoccer]

My aircrack was approximately 3,000 K/s, and then the pyrit was appoxamatly 1,000 PMk/s