Results 1 to 8 of 8

Thread: Installation Kali Linux

  1. #1
    Join Date
    2019-Oct
    Posts
    4

    Installation Kali Linux

    Hello guys,
    I have an ASUS X509UA laptop running on Windows 10 64bits. I wanted to install Kali Linux (2019.3) so I followed all the procedure:
    -Create bootable USB with Rufus
    -Create a partition on my disk (24Go)
    -Disable Fast and Secure Boot in BIOS
    -Do the graphical installation
    But when the time to chose a partition where installing Kali comes, I cannot see the partition I created. I can't even my SSD. I can only see my USB key.


    By the way, here's some informations about my setup

    Capturek.jpg
    (the other commands don't work)
    (This is on the Kali Subsystem provided by the Windows Store)

    Thanks for your help

  2. #2
    Join Date
    2016-Dec
    Posts
    806
    I don't know for sure, but it *may* be due to the secureboot.

    In case you want to give info about hardware, you can use the command lshw.

  3. #3
    Join Date
    2019-Oct
    Posts
    4
    I've already disabled the secure boot.
    Here's some info about hardware:
    Capture2.jpg

  4. #4
    Join Date
    2016-Dec
    Location
    Canada
    Posts
    322
    In the bios there my be an option to enable virtulization. Try this

  5. #5
    Join Date
    2019-Oct
    Posts
    4
    Yes indeed, but this was already enabled. Thanks though.

  6. #6
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Check in your UEFI settings. Storage configuration> Configure SATA as AHCI should be selected. You have to reinstall Windows also after switching to AHCI otherwise the Windows won't boot. Is it set to AHCI already?

  7. #7
    Join Date
    2019-Oct
    Posts
    4
    No, it isn't set to AHCI, so when I'll turn SATA as AHCI, my windows partition will be enrased ?

  8. #8
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Windows will not be erased but it will not boot. Switch to AHCI and see if SSD shows up in Installer menu.

Similar Threads

  1. Replies: 0
    Last Post: 2016-09-07, 21:16
  2. Installation of my R9 290 in Kali Linux
    By Swigart in forum Installing Archive
    Replies: 0
    Last Post: 2015-12-25, 11:14

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •