Hi. I have istalled Kali Linux a week ago on Virtual Box 6.1. I am using TP-Link tl-wn7200nd. on start It was missing firmware and after installing the firmware, it shows that wifi is available but is not showing any networks... I used the commands dmesg and its result is as below
.
root@kali:~# dmesg
[ 0.000000] Linux version 5.4.0-kali3-amd64 ([email protected]) (gcc version 9.2.1 20200104 (Debian 9.2.1-22)) #1 SMP Debian 5.4.13-1kali1 (2020-01-20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-kali3-amd64 root=UUID=1ee8460e-4367-4b35-a9b8-0dd20ca9cb94 ro quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 4c41f001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 11456517499 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000004] tsc: Detected 2904.002 MHz processor
[ 0.001808] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001810] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001815] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.001825] MTRR default type: uncachable
[ 0.001826] MTRR variable ranges disabled:
[ 0.001827] Disabled
[ 0.001828] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.001831] CPU MTRRs all blank - virtualized system.
[ 0.001833] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.001900] found SMP MP-table at [mem 0x0009fff0-0x0009ffff]
[ 0.093864] BRK [0x4c601000, 0x4c601fff] PGTABLE
[ 0.093868] BRK [0x4c602000, 0x4c602fff] PGTABLE
[ 0.093869] BRK [0x4c603000, 0x4c603fff] PGTABLE
[ 0.093920] BRK [0x4c604000, 0x4c604fff] PGTABLE
[ 0.093922] BRK [0x4c605000, 0x4c605fff] PGTABLE
[ 0.094100] BRK [0x4c606000, 0x4c606fff] PGTABLE
[ 0.094138] RAMDISK: [mem 0x3324f000-0x3591efff]
[ 0.094148] ACPI: Early table checksum verification disabled
[ 0.094152] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.094156] ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.094162] ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.094167] ACPI: DSDT 0x000000007FFF0470 002325 (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.094171] ACPI: FACS 0x000000007FFF0200 000040
[ 0.094174] ACPI: FACS 0x000000007FFF0200 000040
[ 0.094177] ACPI: APIC 0x000000007FFF0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.094181] ACPI: SSDT 0x000000007FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.094190] ACPI: Local APIC address 0xfee00000
[ 0.094421] No NUMA configuration found
[ 0.094422] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[ 0.094425] NODE_DATA(0) allocated [mem 0x7ffeb000-0x7ffeffff]
[ 0.094447] Zone ranges:
[ 0.094448] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.094450] DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
[ 0.094451] Normal empty
[ 0.094452] Device empty
[ 0.094453] Movable zone start for each node
[ 0.094454] Early memory node ranges
[ 0.094455] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.094456] node 0: [mem 0x0000000000100000-0x000000007ffeffff]
[ 0.094458] Zeroed struct page in unavailable ranges: 98 pages
[ 0.094459] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[ 0.094460] On node 0 totalpages: 524174
[ 0.094462] DMA zone: 64 pages used for memmap
[ 0.094462] DMA zone: 21 pages reserved
[ 0.094463] DMA zone: 3998 pages, LIFO batch:0
[ 0.094523] DMA32 zone: 8128 pages used for memmap
[ 0.094524] DMA32 zone: 520176 pages, LIFO batch:63
[ 0.102775] ACPI: PM-Timer IO Port: 0x4008
[ 0.102778] ACPI: Local APIC address 0xfee00000
[ 0.102834] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.102837] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.102838] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.102840] ACPI: IRQ0 used by override.
[ 0.102841] ACPI: IRQ9 used by override.
[ 0.102843] Using ACPI (MADT) for SMP configuration information
[ 0.102849] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.102869] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.102871] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.102871] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.102872] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.102874] [mem 0x80000000-0xfebfffff] available for PCI devices
[ 0.102875] Booting paravirtualized kernel on KVM
[ 0.102878] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.302861] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.303028] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u2097152
[ 0.303046] pcpu-alloc: s178584 r8192 d30312 u2097152 alloc=1*2097152
[ 0.303049] pcpu-alloc: [0] 0
[ 0.303078] Built 1 zonelists, mobility grouping on. Total pages: 515961
[ 0.303079] Policy zone: DMA32
[ 0.303081] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-kali3-amd64 root=UUID=1ee8460e-4367-4b35-a9b8-0dd20ca9cb94 ro quiet splash
[ 0.303271] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.303351] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.303396] mem auto-init: stackff, heap allocff, heap freeff
[ 0.303399] Calgary: detecting Calgary via BIOS EBDA area
[ 0.303401] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.309563] Memory: 1996104K/2096696K available (10243K kernel code, 1196K rwdata, 3736K rodata, 1668K init, 2056K bss, 100592K reserved, 0K cma-reserved)
[ 0.309692] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.309707] Kernel/User page tables isolation: enabled
[ 0.309721] ftrace: allocating 33931 entries in 133 pages
[ 0.328349] rcu: Hierarchical RCU implementation.
[ 0.328350] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.328352] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.328352] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.331667] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16
[ 0.331896] random: crng done (trusting CPU's manufacturer)
[ 0.340653] Console: colour VGA+ 80x25
[ 0.340656] printk: console [tty0] enabled
[ 0.340674] ACPI: Core revision 20190816
[ 0.340760] APIC: Switch to symmetric I/O mode setup
[ 0.341009] x2apic enabled
[ 0.341238] Switched APIC routing to physical x2apic.
[ 0.342348] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.342371] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29dc079b5d9, max_idle_ns: 440795223751 ns
[ 0.342376] Calibrating delay loop (skipped) preset value.. 5808.00 BogoMIPS (lpj=11616008)
[ 0.342379] pid_max: default: 32768 minimum: 301
[ 0.342407] LSM: Security Framework initializing
[ 0.342413] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.342431] AppArmor: AppArmor initialized
[ 0.342433] TOMOYO Linux initialized
[ 0.342451] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.342458] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.342753] process: using mwait in idle threads
[ 0.342758] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.342759] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.342761] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.342762] Spectre V2 : Mitigation: Full generic retpoline
[ 0.342763] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.342764] Speculative Store Bypass: Vulnerable
[ 0.342767] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.347655] Freeing SMP alternatives memory: 24K
[ 0.457275] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.457402] Performance Events: unsupported p6 CPU model 142 no PMU driver, software events only.
[ 0.457431] rcu: Hierarchical SRCU implementation.
[ 0.457716] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.457735] smp: Bringing up secondary CPUs ...
[ 0.457736] smp: Brought up 1 node, 1 CPU
[ 0.457737] smpboot: Max logical packages: 1
[ 0.457737] smpboot: Total of 1 processors activated (5808.00 BogoMIPS)
[ 0.457859] devtmpfs: initialized
[ 0.457898] x86/mm: Memory block size: 128MB
[ 0.458172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.458175] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.458209] pinctrl core: initialized pinctrl subsystem
[ 0.458332] NET: Registered protocol family 16
[ 0.458373] audit: initializing netlink subsys (disabled)
[ 0.458373] cpuidle: using governor ladder
[ 0.458373] cpuidle: using governor menu
[ 0.458373] ACPI: bus type PCI registered
[ 0.458373] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.458373] PCI: Using configuration type 1 for base access
[ 0.458373] audit: type=2000 audit(1586411930.557:1): state=initialized audit_enabled=0 res=1
[ 0.458373] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.555128] ACPI: Added _OSI(Module Device)
[ 0.555129] ACPI: Added _OSI(Processor Device)
[ 0.555129] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.555130] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.555131] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.555131] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.555132] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.556594] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.557775] ACPI: Interpreter enabled
[ 0.557784] ACPI: (supports S0 S5)
[ 0.557784] ACPI: Using IOAPIC for interrupt routing
[ 0.557931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.558026] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.561908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.561912] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.562231] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.562236] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.562640] PCI host bridge to bus 0000:00
[ 0.562642] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.562643] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.562644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.562645] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff window]
[ 0.562646] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.562688] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.563320] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.564060] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.564430] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.564582] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.564583] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.564584] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.564585] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.564826] pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
[ 0.567604] pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
[ 0.570416] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.573186] pci 0000:00:02.0: reg 0x18: [mem 0xf8000000-0xf81fffff]
[ 0.584004] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.585455] pci 0000:00:03.0: reg 0x10: [mem 0xf8200000-0xf821ffff]
[ 0.588096] pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
[ 0.595095] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.596468] pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
[ 0.597753] pci 0000:00:04.0: reg 0x14: [mem 0xf8400000-0xf87fffff]
[ 0.598475] pci 0000:00:04.0: reg 0x18: [mem 0xf8800000-0xf8803fff pref]
[ 0.604040] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.604186] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.604250] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.604819] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.606244] pci 0000:00:06.0: reg 0x10: [mem 0xf8804000-0xf8804fff]
[ 0.614542] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.615072] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.615082] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.615394] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.616720] pci 0000:00:0b.0: reg 0x10: [mem 0xf8805000-0xf8805fff]
[ 0.624174] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.625549] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
[ 0.626472] pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
[ 0.627723] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
[ 0.628875] pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
[ 0.630005] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
[ 0.630472] pci 0000:00:0d.0: reg 0x24: [mem 0xf8806000-0xf8807fff]
[ 0.634627] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.634841] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[ 0.634930] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.635017] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[ 0.635187] iommu: Default domain type: Translated
[ 0.635233] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.635237] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.635239] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.635240] vgaarb: loaded
[ 0.635312] EDAC MC: Ver: 3.0.0
[ 0.635622] PCI: Using ACPI for IRQ routing
[ 0.635623] PCI: pci_cache_line_size set to 64 bytes
[ 0.635827] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.635831] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.635997] clocksource: Switched to clocksource kvm-clock
[ 0.647946] VFS: Disk quotas dquot_6.6.0
[ 0.647959] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.648043] AppArmor: AppArmor Filesystem Enabled
[ 0.648061] pnp: PnP ACPI init
[ 0.648117] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.648174] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.648858] pnp: PnP ACPI: found 2 devices
[ 0.652633] thermal_sys: Registered thermal governor 'fair_share'
[ 0.652634] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.652635] thermal_sys: Registered thermal governor 'step_wise'
[ 0.652636] thermal_sys: Registered thermal governor 'user_space'
[ 0.657202] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.657235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.657236] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.657237] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.657238] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff window]
[ 0.657282] NET: Registered protocol family 2
[ 0.657393] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.657397] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.657411] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.657439] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.657457] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.657462] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.657488] NET: Registered protocol family 1
[ 0.657495] NET: Registered protocol family 44
[ 0.657525] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.657537] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.657588] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.659594] PCI: CLS 0 bytes, default 64
[ 0.659626] Trying to unpack rootfs image as initramfs...
[ 1.324692] Freeing initrd memory: 39744K
[ 1.324759] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc079b5d9, max_idle_ns: 440795223751 ns
[ 1.324770] clocksource: Switched to clocksource tsc
[ 1.324800] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.325039] Initialise system trusted keyrings
[ 1.325047] Key type blacklist registered
[ 1.325083] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 1.326251] zbud: loaded
[ 1.326435] Platform Keyring initialized
[ 1.326435] Key type asymmetric registered
[ 1.326435] Asymmetric key parser 'x509' registered
[ 1.326435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.326435] io scheduler mq-deadline registered
[ 1.326435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.326435] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.326435] Linux agpgart interface v0.103
[ 1.327030] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.327031] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.327105] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.327555] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.327559] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.327637] mousedev: PS/2 mouse device common for all mice
[ 1.327829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.328255] rtc_cmos rtc_cmos: registered as rtc0
[ 1.328267] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.328272] intel_pstate: CPU model not supported
[ 1.328282] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.328328] drop_monitor: Initializing network drop monitor service
[ 1.328479] NET: Registered protocol family 10
[ 1.336781] Segment Routing with IPv6
[ 1.336800] mip6: Mobile IPv6
[ 1.336802] NET: Registered protocol family 17
[ 1.336826] mpls_gso: MPLS GSO support
[ 1.336897] IPI shorthand broadcast: enabled
[ 1.336903] sched_clock: Marking stable (1324567387, 10517992)->(1337330842, -2245463)
[ 1.336951] registered taskstats version 1
[ 1.336951] Loading compiled-in X.509 certificates
[ 1.361129] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.361144] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.361164] zswap: loaded using pool lzo/zbud
[ 1.361237] Key type ._fscrypt registered
[ 1.361238] Key type .fscrypt registered
[ 1.361252] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.361526] rtc_cmos rtc_cmos: setting system clock to 2020-04-09T05:58:36 UTC (1586411916)
[ 1.362375] Freeing unused kernel image memory: 1668K
[ 1.370950] Write protecting the kernel read-only data: 16384k
[ 1.371433] Freeing unused kernel image memory: 2036K
[ 1.371541] Freeing unused kernel image memory: 360K
[ 1.380983] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.380984] x86/mm: Checking user space page tables
[ 1.392968] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.392972] Run /init as init process
[ 1.568805] button: module verification failed: signature and/or required key missing - tainting kernel
[ 1.569036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.569296] ACPI: Power Button [PWRF]
[ 1.569426] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 1.569445] ACPI: Sleep Button [SLPF]
[ 1.582796] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.582888] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.584347] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.589851] SCSI subsystem initialized
[ 1.596631] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.596631] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.601820] ACPI: bus type USB registered
[ 1.601835] usbcore: registered new interface driver usbfs
[ 1.601841] usbcore: registered new interface driver hub
[ 1.601848] usbcore: registered new device driver usb
[ 1.603273] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 1.618569] libata version 3.00 loaded.
[ 1.619475] ahci 0000:00:0d.0: version 3.0
[ 1.619980] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 1.620092] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.620094] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.620611] ata_piix 0000:00:01.1: version 2.13
[ 1.626376] cryptd: max_cpu_qlen set to 1000
[ 1.629346] scsi host0: ahci
[ 1.629439] ata1: SATA max UDMA/133 abar m8192@0xf8806000 port 0xf8806100 irq 21
[ 1.629537] scsi host1: ata_piix
[ 1.631519] AVX2 version of gcm_enc/dec engaged.
[ 1.631519] AES CTR mode by8 optimization enabled
[ 1.635737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.635936] ehci-pci: EHCI PCI platform driver
[ 1.636419] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 1.636424] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.636634] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf8805000
[ 1.637286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.650517] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.650562] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.650563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650564] usb usb1: Product: EHCI Host Controller
[ 1.650565] usb usb1: Manufacturer: Linux 5.4.0-kali3-amd64 ehci_hcd
[ 1.650566] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.650647] hub 1-0:1.0: USB hub found
[ 1.650653] hub 1-0:1.0: 12 ports detected
[ 1.651076] ohci-pci: OHCI PCI platform driver
[ 1.651559] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 1.651563] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.651621] ohci-pci 0000:00:06.0: irq 22, io mem 0xf8804000
[ 1.653466] scsi host2: ata_piix
[ 1.653509] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.653510] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.686268] [drm] DMA map mode: Caching DMA mappings.
[ 1.686315] [drm] Capabilities:
[ 1.686316] [drm] Cursor.
[ 1.686316] [drm] Cursor bypass 2.
[ 1.686316] [drm] Alpha cursor.
[ 1.686316] [drm] 3D.
[ 1.686317] [drm] Extended Fifo.
[ 1.686317] [drm] Pitchlock.
[ 1.686317] [drm] Irq mask.
[ 1.686317] [drm] GMR.
[ 1.686318] [drm] Traces.
[ 1.686318] [drm] GMR2.
[ 1.686318] [drm] Screen Object 2.
[ 1.686319] [drm] Max GMR ids is 8192
[ 1.686320] [drm] Max number of GMR pages is 1048576
[ 1.686320] [drm] Max dedicated hypervisor surface memory is 393216 kiB
[ 1.686320] [drm] Maximum display memory size is 131072 kiB
[ 1.686321] [drm] VRAM at 0xf0000000 size is 131072 kiB
[ 1.686321] [drm] MMIO at 0xf8000000 size is 2048 kiB
[ 1.692112] [TTM] Zone kernel: Available graphics memory: 1019968 KiB
[ 1.692113] [TTM] Initializing pool allocator
[ 1.692117] [TTM] Initializing DMA pool allocator
[ 1.692140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.692140] [drm] No driver support for vblank timestamp query.
[ 1.692335] [drm] Screen Objects Display Unit initialized
[ 1.692380] [drm] width 720
[ 1.692390] [drm] height 400
[ 1.692399] [drm] bpp 32
[ 1.692709] [drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[ 1.692718] [drm] DX: no.
[ 1.692718] [drm] Atomic: yes.
[ 1.692719] [drm] SM4_1: no.
[ 1.692737] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 1.693591] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 1.696529] fbcon: svgadrmfb (fb0) is primary device
[ 1.699032] Console: switching to colour frame buffer device 100x37
[ 1.707149] [drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
[ 1.710985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.710986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710988] usb usb2: Product: OHCI PCI host controller
[ 1.710988] usb usb2: Manufacturer: Linux 5.4.0-kali3-amd64 ohci_hcd
[ 1.710989] usb usb2: SerialNumber: 0000:00:06.0
[ 1.711105] hub 2-0:1.0: USB hub found
[ 1.711216] hub 2-0:1.0: 12 ports detected
[ 1.834992] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 1.835519] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.950418] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.956970] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.956971] ata1.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 32)
[ 1.957175] ata1.00: configured for UDMA/133
[ 1.957241] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.957763] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.961882] sd 0:0:0:0: [sda] 167772160 512-byte logical blocks: (85.9 GB/80.0 GiB)
[ 1.961888] sd 0:0:0:0: [sda] Write Protect is off
[ 1.961889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.961897] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.016180] sda: sda1 sda2 < sda5 >
[ 2.016568] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.034785] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 2.034787] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.035102] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.117311] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:1f:30:76
[ 2.117314] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.171114] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 2.501152] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00
[ 2.501155] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.501157] usb 2-1: Product: USB Tablet
[ 2.501158] usb 2-1: Manufacturer: VirtualBox
[ 2.509344] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.523181] usbcore: registered new interface driver usbhid
[ 2.523184] usbhid: USB HID core driver
[ 2.525403] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input6
[ 2.525531] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 2.527158] PM: Image not found (code -22)
[ 2.964155] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.387562] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 5.547099] systemd[1]: Inserted module 'autofs4'
[ 5.735515] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.735706] systemd[1]: Detected virtualization oracle.
[ 5.735725] systemd[1]: Detected architecture x86-64.
[ 5.751890] systemd[1]: Set hostname to <kali>.
[ 7.895385] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 8.710166] systemd[1]: Created slice system-getty.slice.
[ 8.711303] systemd[1]: Created slice User and Session Slice.
[ 8.711536] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.712281] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.712532] systemd[1]: Reached target Slices.
[ 8.712626] systemd[1]: Reached target System Time Set.
[ 8.712675] systemd[1]: Reached target System Time Synchronized.
[ 8.713114] systemd[1]: Listening on Syslog Socket.
[ 8.713599] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.713805] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.715573] systemd[1]: Listening on Journal Audit Socket.
[ 8.717728] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.718487] systemd[1]: Listening on Journal Socket.
[ 8.719479] systemd[1]: Listening on udev Control Socket.
[ 8.719951] systemd[1]: Listening on udev Kernel Socket.
[ 8.724459] systemd[1]: Mounting Huge Pages File System...
[ 8.731544] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.741817] systemd[1]: Mounting RPC Pipe File System...
[ 8.749635] systemd[1]: Mounting Kernel Debug File System...
[ 8.749914] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 8.758528] systemd[1]: Starting Set the console keyboard layout...
[ 8.768156] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.873403] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.873547] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.878657] systemd[1]: Starting Journal Service...
[ 8.911754] systemd[1]: Starting Load Kernel Modules...
[ 8.922999] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.940624] systemd[1]: Starting udev Coldplug all Devices...
[ 8.959702] systemd[1]: Mounted Huge Pages File System.
[ 8.974900] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.975356] systemd[1]: Mounted Kernel Debug File System.
[ 8.980886] systemd[1]: Started Create list of static device nodes for the current kernel.
[ 9.016682] systemd[1]: Started Load Kernel Modules.
[ 9.017057] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 9.017208] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 9.018492] systemd[1]: Starting Apply Kernel Variables...
[ 9.051225] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.058446] systemd[1]: Started Remount Root and Kernel File Systems.
[ 9.126494] RPC: Registered named UNIX socket transport module.
[ 9.126495] RPC: Registered udp transport module.
[ 9.126495] RPC: Registered tcp transport module.
[ 9.126496] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.189333] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 9.190308] systemd[1]: Starting Load/Save Random Seed...
[ 9.191889] systemd[1]: Starting Create System Users...
[ 9.193369] systemd[1]: Mounted RPC Pipe File System.
[ 9.195102] systemd[1]: Started Set the console keyboard layout.
[ 9.252329] systemd[1]: Started Apply Kernel Variables.
[ 9.304803] systemd[1]: Started udev Coldplug all Devices.
[ 9.398134] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 9.606820] systemd[1]: Started Load/Save Random Seed.
[ 9.675699] systemd[1]: Started Helper to synchronize boot up for ifupdown.
[ 9.695940] systemd[1]: Started Create System Users.
[ 9.697611] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 10.119482] systemd[1]: Started Create Static Device Nodes in /dev.
[ 10.120944] systemd[1]: Reached target Local File Systems (Pre).
[ 10.121122] systemd[1]: Reached target Local File Systems.
[ 10.132651] systemd[1]: Starting Enable support for additional executable binary formats...
[ 10.143498] systemd[1]: Starting Set console font and keymap...
[ 10.167588] systemd[1]: Starting Raise network interfaces...
[ 10.179224] systemd[1]: Starting Preprocess NFS configuration...
[ 10.199141] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 10.199331] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 10.199643] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 10.229879] systemd[1]: Starting udev Kernel Device Manager...
[ 10.263049] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 325 (update-binfmts)
[ 10.336796] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 10.341095] systemd[1]: Started Set console font and keymap.
[ 10.344118] systemd[1]: nfs-config.service: Succeeded.
[ 10.347014] systemd[1]: Started Preprocess NFS configuration.
[ 10.347275] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[ 10.347298] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[ 10.347332] systemd[1]: Reached target NFS client services.
[ 10.347374] systemd[1]: Reached target Remote File Systems (Pre).
[ 10.347413] systemd[1]: Reached target Remote File Systems.
[ 10.368611] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 10.398007] systemd[1]: Received SIGRTMIN+20 from PID 229 (plymouthd).
[ 10.401162] systemd[1]: Started Journal Service.
[ 10.590514] systemd-journald[309]: Received client request to flush runtime journal.
[ 13.937191] vboxguest: loading out-of-tree module taints kernel.
[ 13.950322] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 13.950725] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
[ 13.952300] vboxguest: Successfully loaded version 6.1.2_Debian
[ 13.952348] vboxguest: misc device minor 61, IRQ 20, I/O port d040, MMIO at 00000000f8400000 (size 0x400000)
[ 13.952349] vboxguest: Successfully loaded version 6.1.2_Debian (interface 0x00010004)
[ 13.969437] ACPI: AC Adapter [AC] (off-line)
[ 14.069222] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.210411] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[ 14.264565] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.264593] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 16.914222] Adding 2095100k swap on /dev/sda5. Priority:-2 extents:1 across:2095100k FS
[ 17.037393] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 21.654395] vboxsf: g_fHostFeatures=0x8000000f g_fSfFeatures=0x1 g_uSfLastFunction=29
[ 21.654666] vboxsf: Successfully loaded version 6.1.2_Debian
[ 21.654693] vboxsf: Successfully loaded version 6.1.2_Debian on 5.4.0-kali3-amd64 SMP mod_unload modversions (LINUX_VERSION_CODE=0x5040d)
[ 24.447760] 05:58:59.586032 main VBoxService 6.1.2_Debian r135662 (verbosity: 0) linux.amd64 (Jan 15 2020 15:14:29) release log
05:58:59.586043 main Log opened 2020-04-09T05:58:59.585990000Z
[ 24.450442] 05:58:59.588809 main OS Product: Linux
[ 24.450971] 05:58:59.589338 main OS Release: 5.4.0-kali3-amd64
[ 24.451090] 05:58:59.589499 main OS Version: #1 SMP Debian 5.4.13-1kali1 (2020-01-20)
[ 24.451232] 05:58:59.589612 main Executable: /usr/sbin/VBoxService
05:58:59.589616 main Process ID: 551
05:58:59.589618 main Package type: LINUX_64BITS_GENERIC (OSE)
[ 24.461681] 05:58:59.600032 main 6.1.2_Debian r135662 started. Verbose level = 0
[ 24.500492] 05:58:59.638836 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[ 25.998430] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 25.999054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1712.694068] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1712.774152] usb 1-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[ 1712.774161] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1712.774166] usb 1-1: Product: 802.11 n WLAN
[ 1712.774171] usb 1-1: Manufacturer: Ralink
[ 1712.774175] usb 1-1: SerialNumber: 1.0
[ 1713.633274] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1713.696253] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1714.551985] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1714.559452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 1714.571704] usbcore: registered new interface driver rt2800usb
[ 1714.700780] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1714.770677] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 1714.770684] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 2269.144039] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -32
[ 2270.169069] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -32
[ 2271.160144] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -32
[ 2271.259428] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -32
[ 2271.324060] usb 1-1: USB disconnect, device number 2
[ 2271.324301] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -19
[ 2273.697313] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 2273.776152] usb 1-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[ 2273.776154] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2273.776155] usb 1-1: Product: 802.11 n WLAN
[ 2273.776157] usb 1-1: Manufacturer: Ralink
[ 2273.776158] usb 1-1: SerialNumber: 1.0
[ 2274.112786] usb 1-1: reset high-speed USB device number 3 using ehci-pci
[ 2274.179488] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 2275.029706] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2275.037754] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 2275.417866] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 2275.417894] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 2275.417897] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 2296.138488] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -32
[ 2296.238829] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -32
[ 2296.341051] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x7010 with error -32
[ 2296.439696] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -32
[ 2296.537492] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -32
[ 2296.639272] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x101c with error -32
[ 2296.740299] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -32
[ 2296.837448] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -32
[ 2296.939105] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x101c with error -32
[ 2297.040001] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -32
[ 2297.671868] usb 1-1: USB disconnect, device number 3
[ 2298.904227] usb 1-1: new high-speed USB device number 4 using ehci-pci
[ 2298.981966] usb 1-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[ 2298.981968] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2298.981970] usb 1-1: Product: 802.11 n WLAN
[ 2298.981971] usb 1-1: Manufacturer: Ralink
[ 2298.981972] usb 1-1: SerialNumber: 1.0
[ 2299.324306] usb 1-1: reset high-speed USB device number 4 using ehci-pci
[ 2299.386091] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 2301.161779] rt2x00usb_vendor_request: 19 callbacks suppressed
[ 2301.161784] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -32
[ 2301.260389] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -32
[ 2301.360642] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2301.462041] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -32
[ 2301.559579] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2301.660838] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -32
[ 2301.758925] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -32
[ 2301.861976] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -32
[ 2301.958985] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -32
[ 2302.061257] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2306.164615] rt2x00usb_vendor_request: 40 callbacks suppressed
[ 2306.164626] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -32
[ 2306.266365] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2306.368085] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -32
[ 2306.464687] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2306.564941] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -32
[ 2306.667918] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -32
[ 2306.766658] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -32
[ 2306.866430] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -32
[ 2306.967240] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -32
[ 2307.064351] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -32
[ 2308.970047] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2309.175414] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 2309.318584] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 2309.318606] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 2309.318609] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 2311.197370] rt2x00usb_vendor_request: 37 callbacks suppressed
[ 2311.197379] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.308583] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.418961] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.531191] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.642229] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.754661] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.866863] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2311.981450] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2312.089652] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2312.202012] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.269465] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2316.269478] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.383264] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.494542] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.604679] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.716045] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.829534] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2316.940560] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2317.054174] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2317.164028] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2317.277953] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2320.646055] ieee80211 phy2: rt2800_wait_csr_ready: Error - Unstable hardware
[ 2321.378359] rt2x00usb_vendor_request: 36 callbacks suppressed
[ 2321.378369] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2321.489098] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2321.603802] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2321.717457] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2321.831190] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2321.943140] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2322.055611] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2322.166292] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2322.278328] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2322.389639] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.433562] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2326.433572] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.542413] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.655338] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.767137] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.879301] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2326.990798] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2327.103044] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2327.214903] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2327.326009] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2327.441246] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2331.483340] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2331.483349] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2331.592028] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2331.704447] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2331.816056] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2331.929320] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2332.041264] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2332.154066] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2332.263533] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2332.275969] ieee80211 phy2: rt2800_wait_csr_ready: Error - Unstable hardware
[ 2332.377807] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -32
[ 2332.478587] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x7010 with error -32
[ 2336.518189] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2336.518199] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2336.632152] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2336.743145] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2336.856211] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2336.967204] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2337.077664] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2337.193838] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2337.306459] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2337.417905] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2337.531120] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2341.568762] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2341.568772] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2341.679868] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2341.791304] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2341.903675] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.017414] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.129117] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.240235] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.350631] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.463009] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2342.576580] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2343.933723] ieee80211 phy2: rt2800_wait_csr_ready: Error - Unstable hardware
[ 2346.570174] rt2x00usb_vendor_request: 35 callbacks suppressed
[ 2346.570179] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2346.681849] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2346.796180] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2346.905479] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.016659] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.131245] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.240553] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.352592] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.464814] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2347.576880] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -32
[ 2349.704484] usb 1-1: USB disconnect, device number 4
[ 2350.339158] ieee80211 phy2: rt2800_wait_csr_ready: Error - Unstable hardware
[ 2355.144141] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 2355.223073] usb 1-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[ 2355.223075] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2355.223077] usb 1-1: Product: 802.11 n WLAN
[ 2355.223078] usb 1-1: Manufacturer: Ralink
[ 2355.223079] usb 1-1: SerialNumber: 1.0
[ 2355.560234] usb 1-1: reset high-speed USB device number 5 using ehci-pci
[ 2355.622004] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 2356.457262] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2356.472066] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[ 2356.674957] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 2356.674980] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 2356.674982] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 2360.064331] rt2x00usb_vendor_request: 19 callbacks suppressed
[ 2360.064335] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6640 with error -32
[ 2360.163423] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6648 with error -32
[ 2360.261695] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6650 with error -32
[ 2360.362504] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6658 with error -32
[ 2360.461974] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6660 with error -32
[ 2360.500729] usb 1-1: USB disconnect, device number 5
[ 2360.535912] ieee80211 phy3: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting
[ 2360.535918] ieee80211 phy3: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
[ 2365.954659] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 2366.032540] usb 1-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[ 2366.032543] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2366.032544] usb 1-1: Product: 802.11 n WLAN
[ 2366.032545] usb 1-1: Manufacturer: Ralink
[ 2366.032546] usb 1-1: SerialNumber: 1.0
[ 2366.371302] usb 1-1: reset high-speed USB device number 6 using ehci-pci
[ 2366.432720] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 2367.264482] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2367.272856] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
[ 2367.476412] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 2367.476434] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 2367.476437] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
root@kali:~#

.
Please if someone can help me with this.. I will be very grateful to you...