Page 3 of 5 FirstFirst 12345 LastLast
Results 101 to 150 of 215

Thread: Troubleshooting Wireless Drivers

  1. #101
    Join Date
    2016-Mar
    Posts
    2
    Hello Everyone,

    I have been using Kali Linux for some time on live usb etc... I have an empty Sata slot and have purchased an SSD today and designated that as a Kali Linux OS.



    I have 2 Alfa Antennas/Usb's - I have the AWUS052NH which has a MTK RT3572 chipset and I also have the AWUS036ACH which has and uses RTL8812AU chipset.

    Also, I have a built in wifi card (Mediatek I think it is) which works perfectly fine in windows and has worked over live usb as well as through a Virtualbox.This device does not even show up neither does wlan0....

    I have tried installing both 32 and 64 bit. I have a 64 bit... Anyways, I have tried everything I can think of and tried reading on many different tops and I cannot seem to get the wireless to work for the life of me. However, ethernet works fine.

    What is also interesting is my AWUS036ACH doesn't show the power light blinking at all.. However, the AWUS052NH does blink but if I go to the top right corner and click on the wired icon.. I see that it keeps showing wireless and then it disappears and as it disappears it says disconnecting/not connected its hard to really get a good look and it will keep doing this until it actually ends up freezing Kali and I have to use the power button to shut it off and try again. I have also tried installing he drivers off the installation disk...

    Can someone please help me here so I can get this working properly once and for all? Thank you in advance for reading this and for any replies.


  2. #102
    Join Date
    2016-Mar
    Posts
    6
    Hi All,

    I am new to Kali and I am unable to install compact-wireless-2010-10-26-p. Please see the error in the screenshot attached below:

    make_load_deprecated_syntax.jpg

    Any help would be highly appreciated.

    Thanks,
    Satishcse

  3. #103
    hello i also i have a problem im using a real rtl8723be i fix the network-manager so i could see network but still cant coneect to it.IMAG1216.jpg

  4. #104
    Join Date
    2016-Apr
    Posts
    1
    Hi!

    I'm running Kali on VMware and it don't detect "wlan0" when I type "iwconfig". I only get "lo" and "eth0" and it says "no wireless extensions" in front of them.
    I tried pretty much anything that it has been said on this thread and nothing worked. But I'm such a noob that it won't suprise me if I've done a mistake.
    Each time that I use "airmon-ng" I get "no access to /sys/class/ieee80211/", I don't know if it can help.
    When I type "dmesg" I can't see anywhere "wlan0", there's just "eth0".
    And I even tried "lspci" and it seems that my ethernet controller is detected.

    I don't know if this is just a problem of drivers or not.
    Can someone help me to fix that?

    Note : I can't connect my computer with ethernet because I don't have a physical access to the box that I'm trying to reach (student room). My only access to WiFi that works is with my phone. So if I need to download some packages to update my drivers, I have to download them with my phone and then, with a SD card, transfer the files to my computer.

    Sorry for my bad english, and thanks in advance for any help!

    Update : it seems that is the fault of VMware that doesn't support wireless adaptater, I'll try to make a live USB as soon as possible to confirm this out. But if someone has an other solution I'll really appreciate!
    Last edited by Alex_Cedi; 2016-04-24 at 16:04. Reason: Update

  5. #105
    Join Date
    2016-May
    Posts
    1
    Hi

    I'm running Kali Rolling on a USB Live Boot and I can't get injection to work on my wireless card.

    Output of "lspci -nn | grep work":
    Code:
    3b:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev bb)
    Output of iwconfig:
    Code:
    eth0      no wireless extensions.
    
    wlan0     IEEE 802.11abgn  ESSID:"XXXXXXXXX"  
              Mode:Managed  Frequency:2.452 GHz  Access Point: XX:XX:XX:XX:XX:XX   
              Bit Rate=300 Mb/s   Tx-Power=22 dBm   
              Retry short limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:on
              Link Quality=61/70  Signal level=-49 dBm  
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:8   Missed beacon:0
    
    lo        no wireless extensions.
    Output of ifconfig:
    Code:
    eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            ether XX:XX:XX:XX:XX:  txqueuelen 1000  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 0  (Local Loopback)
            RX packets 26  bytes 1514 (1.4 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 26  bytes 1514 (1.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.0.106  netmask 255.255.255.0  broadcast 192.168.0.255
            inet6 XXXX::XXXX:XXX:XXXX:XXXX  prefixlen 64  scopeid 0x20<link>
            ether XX:XX:XX:XX:XX:XX  txqueuelen 1000  (Ethernet)
            RX packets 2901  bytes 1882749 (1.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 2687  bytes 373061 (364.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    Output of airmon-ng check kill:
    Code:
    Killing these processes:
    
      PID Name
     3117 NetworkManager
     3127 wpa_supplicant
     3132 dhclient
    Output of airmon-ng start wlan0:
    Code:
    PHY	Interface	Driver		Chipset
    
    phy0	wlan0		iwlwifi		Intel Corporation Wireless 7260 (rev bb)
    
    		(mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon)
    		(mac80211 station mode vif disabled for [phy0]wlan0)
    Output of aireplay-ng -9 wlan0mon
    Code:
    22:10:28  Trying broadcast probe requests...
    22:10:30  No Answer...
    22:10:30  Found 1 AP 
    
    22:10:30  Trying directed probe requests...
    22:10:30  XX:XX:XX:XX:XX:XX - channel: 11 - 'XXXXXXXX'
    22:10:36   0/30:   0%
    When trying to install the compat drivers, I get an error when using any "make" commands.
    For example:
    Code:
    root@kali:~/Downloads/backports-4.4.2-1# make
    /--------------
    | Your kernel headers are incomplete/not installed.
    | Please install kernel headers, including a .config
    | file or use the KLIB/KLIB_BUILD make variables to
    | set the kernel to build against, e.g.
    |   make KLIB=/lib/modules/3.1.7/
    | to compile/install for the installed kernel 3.1.7
    | (that isn't currently running.)
    \--
    Makefile:40: recipe for target 'modules' failed
    make[1]: *** [modules] Error 1
    Makefile:30: recipe for target 'default' failed
    make: *** [default] Error 2
    Help would be much appreciated

  6. #106
    I hub a MacBook Pro 2015 to which I run Kali 2016.1 from a persistence USB and an Alfa AWSU036NEH dongle. Monitor mode is working fine, but injection will not associate with access points or work when I test with aireplay-ng. Can someone enlighten me as to a fix.

  7. #107
    I think you can read this topic follow link http://docs.kali.org/installation/tr...-driver-issues. You can solve your problem.

  8. #108
    Join Date
    2016-Sep
    Posts
    3
    Quote Originally Posted by bcerrati View Post
    i have a Broadcom bcm4311 b/g wireless card and i cant get the firmware to work with kali

    plix help!

    ive tryed apt-get install frimware-b43-installer

    removed the module then readded it and when i readd it i get blank screen!

    HERE download your firmware in this site https://www.broadcom.com/support/802.11

  9. #109
    Join Date
    2016-Sep
    Posts
    1
    Hi. I got a Broadcom BCM43124 Card in my HP 255 G4. The standard article did not help me (unless I missed something). Does someone know where i can get an appropriate driver?

  10. #110
    Join Date
    2016-Oct
    Location
    USA, KY
    Posts
    1
    I have a very simple issue, im guessing its easy to fix but i just cant get where the problem is.
    Im running kali linux on VMWare and it seems the ettercap scanning for host
    always returns 3 odd IP addresses that i dont know where they came from.
    192.168.132.1
    192.168.132.2
    192.168.132.254
    Im pretty dumb, but im guessing its the VMWare, i could maybe fix it by using kali live,
    but then i wont learn anything. Plz if u know what i could do, then reply. Im just looking to learn here.
    1337 scritpkitty

  11. #111
    Join Date
    2016-Oct
    Posts
    1
    i have a tp-link tl-wn722n wireless usb adapter. whenever i plug it in my computer while kali linux is running in virtual box my computer crashes. can anyone help?

  12. #112
    Join Date
    2016-Oct
    Posts
    2
    Hello,

    I am trying to install TP-LINK Archer T2UH AC600 in a Kali Linux 2016.2 with Kernel 4.6 but I cant find a driver that works with it.
    All the drivers that I try comes with the same message;

    make -C tools
    make[1]: Entering directory '/root/mt7610u_wifi_sta_v3002_dpo_20130916/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory '/root/mt7610u_wifi_sta_v3002_dpo_20130916/tools'
    /root/mt7610u_wifi_sta_v3002_dpo_20130916/tools/bin2h
    chipset = mt7610u
    cp -f os/linux/Makefile.6 /root/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux/Makefile
    make -C /lib/modules/4.6.0-kali1-amd64/build SUBDIRS=/root/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux modules
    make[1]: Entering directory '/lib/modules/4.6.0-kali1-amd64/build'
    make[1]: *** No rule to make target 'modules'. Stop.
    make[1]: Leaving directory '/lib/modules/4.6.0-kali1-amd64/build'
    Makefile:403: recipe for target 'LINUX' failed
    make: *** [LINUX] Error 2

  13. #113
    Join Date
    2016-Nov
    Posts
    1
    i am using tp link tl-wn722n wireless card and it is not showing in terminal. terminal only shows eth0 and lo. does anyone has a fix to this problem

  14. #114
    Join Date
    2016-Nov
    Posts
    2
    kapoios: I think I had this issue. My Mac Air crashed every time I plugged in the USB. I think, but not 100% sure, was that the issue was due to me having installed the vendor's drivers on the host, in my case my Mac ( OSX ). Remove/Uninstall the drivers from the host and see if that helps. Good Luck.
    Last edited by GeeBawz; 2016-11-18 at 08:20. Reason: Had to be clear who I was addressing

  15. #115
    Join Date
    2014-Jul
    Posts
    2
    Hii

    Am mostly too close on giving up on this .. I wasted 1 whole day already reading about this stupid issue !

    I cant make my intel advanced –n 6205 wireless card to work with kali 4.8.0-kali2-amd64 althought its supposed to be fully supported by Intel and the kernel version ..
    Am not a linux geek , but still am not a noob at all

    I followed every manual on how to do it , with 0 luck , please be kind and help me !
    Below is some results of certain commands


    (Lsmod ¦ grep iwlwifi )

    Iwlwifi iwldvm
    Cfg80211 iwlwifi,mac80211,iwdvm


    Interface doent show on ifconfig , but shows in iwconfig
    I tried to remove and load the iwlwifi module several times with no luck

    Dmesg shows (Rf kill bit toggled to disable radio)

    (Rfkill list )returns
    soft blocked : no
    Hard blocked : yes


    Rfkill unblock all has no effect on the wifi blocking at all

    Please advise

  16. #116
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Raven4D,
    Show the full output of rfkill list all.

  17. #117
    Join Date
    2017-Jan
    Posts
    1

    No networks found (Network Manager)

    Hi all,

    I am running Kali in a Lenovo Ideapad 110 with a Wireless Card Mini PCI-E QCNFA435. Kali is fully updated.


    This is the issue I am facing:
    I can see the wireless interface with iwconfig and ifconfig and it is also seen by Wifite, Reaver, Airmon-ng etc... I can see the networks around me using software like the ones mentioned before.


    Network manager sees my wireless card but it doesn't find any networks so I am unable to reach the internet wirelessly.


    I have searched around the forums and also google and couldn't find a solution.

    Cheers,
    Owl.

  18. #118
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Owl,
    Can you show the output of rfkill list all?

  19. #119
    Join Date
    2017-Jan
    Posts
    5
    hi guys, i've a problem, with my wifi card...

    running airodumpo-ng on wlan0mon, i see all networks captable, but there is no one client (maybe iy see itself )...before upgrading was working fine... can you help me please?

    i show more :
    Code:
    cat /etc/*{release,version}
    DISTRIB_ID=Kali
    DISTRIB_RELEASE=kali-rolling
    DISTRIB_CODENAME=kali-rolling
    DISTRIB_DESCRIPTION="Kali GNU/Linux Rolling"
    PRETTY_NAME="Kali GNU/Linux Rolling"
    NAME="Kali GNU/Linux"
    ID=kali
    VERSION="2016.1"
    VERSION_ID="2016.1"
    ID_LIKE=debian
    ANSI_COLOR="1;31"
    HOME_URL="http://www.kali.org/"
    SUPPORT_URL="http://forums.kali.org/"
    BUG_REPORT_URL="http://bugs.kali.org/"
    Kali Linux Rolling
    cat: /etc/subversion: È una directory
    Code:
    lspci | grep Ather
    02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
    Code:
    root@Asgard:~# dmesg | grep ath5k
    [ 11.829852] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 11.830029] ath5k 0000:02:00.0: registered as 'phy0'
    [ 12.396437] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    [ 236.003411] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
    [15988.004967] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [23068.005332] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [24268.005022] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [26428.004913] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [26908.004633] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
    [31828.004523] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [32428.004737] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [35068.005301] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
    [36268.001901] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [36628.005114] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [36988.003952] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [38428.004650] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [41788.003324] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [42028.004905] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [42148.005186] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [42628.004856] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [49588.005008] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [50788.004766] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [51629.884057] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
    [53068.004539] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [54991.400078] ath5k: ath5k_hw_get_isr: ISR: 0x00000004 IMR: 0x00000000
    [59548.004532] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [60868.004943] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
    [63028.005078] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    [68788.004855] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
    [70588.005256] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
    i've alot of time to remove module ath5k and reinstall it with a lot of option, but nothing change.


    Code:
    root@Asgard:~# iwconfig
    wlan0 IEEE 802.11bg ESSID:"HighWay"
    Mode:Managed Frequency:2.462 GHz Access Point: C4:EA:1D:BC:5F:A7
    Bit Rate=54 Mb/s Tx-Power=20 dBm
    Retry short limit:7 RTS thrff Fragment thrff
    Encryption keyff
    Power Managementff
    Link Quality=51/70 Signal level=-59 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:113 Invalid misc:1597 Missed beacon:0

    lo no wireless extensions.

    eth0 no wireless extensions.
    Code:
    root@Asgard:~# ifconfig


    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.1.125 netmask 255.255.255.0 broadcast 192.168.1.255
    inet6 fe80::223:4eff:fe56:a781 prefixlen 64 scopeid 0x20<link>
    ether 00:23:4e:56:a7:81 txqueuelen 1000 (Ethernet)
    RX packets 167618 bytes 186191338 (177.5 MiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 95444 bytes 11563273 (11.0 MiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    Code:
    root@Asgard:~# airmon-ng check kill

    Killing these processes:

    PID Name
    2058 wpa_supplicant

    root@Asgard:~# airmon-ng start wlan0


    PHY Interface Driver Chipset

    phy0 wlan0 ath5k Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)

    (mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon)
    (mac80211 station mode vif disabled for [phy0]wlan0)

    root@Asgard:~# airodump-ng wlan0mon

    CH 5 ][ Elapsed: 2 mins ][ 2017-01-26 17:47

    BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID

    C4:EA:1D:BC:5F:A7 -63 317 1 0 11 54e WPA2 CCMP PSK HighWay
    32:91:8F:44:1C:9E -69 207 0 0 1 54e. WPA2 CCMP MGT WOW FI - FASTWEB
    30:91:8F:44:1C:9D -68 217 0 0 1 54e WPA2 CCMP PSK TNCAP441C9D
    F0:84:2F:C9:60:86 -71 231 0 0 9 54e WPA2 CCMP MGT WOW FI - FASTWEB
    F0:84:2F:C9:60:83 -71 235 0 0 9 54e WPA2 CCMP PSK FASTWEB-1-K1RcVvAkG4nR
    C4:EA:1D:69:06:31 -81 108 0 0 1 54e WPA2 CCMP PSK FASTWEB-1-690631
    C6:EA:1D:69:06:32 -84 88 0 0 1 54e. WPA2 CCMP MGT WOW FI - FASTWEB
    F8:35D:EB:07:31 -89 36 0 0 11 54e. WPA CCMP PSK GOinternet_EB0734
    00:F4:6F:08:20:E7 -89 69 0 0 1 54e. WPA2 CCMP PSK AndroidHotspot7953
    DC:0B:1A:3B:BD:5B -92 4 0 0 1 54e WPA2 CCMP PSK Telecom-71687253

    BSSID STATION PWR Rate Lost Frames Probe

    C4:EA:1D:BC:5F:A7 00:23:4E:56:A7:81 -1 1e- 0 0 4

    root@Asgard:~#
    after 2 minutes my iphone connected to the same network don't has been found. and i can't believe that all round there i no one client.. ..

    (the only client that's appeare, is my pc connected to my network, and the result si very strange after airmon-ng check kill)

    what i've to try?

    thanks a lot

  20. #120
    Join Date
    2016-Aug
    Posts
    3
    i've got the usb-ac 56 from asus with linux drivers, it has a "install.sh" script i've tried to run it like "chmod 777 install.sh" and "./install.sh" the error messages are

    PHP Code:
    make[1]: Entering directory '/lib/modules/4.3.0-kali1-amd64/build'
    make[1]: *** No rule to make target 'modules'.  Stop.
    make[1]: Leaving directory '/lib/modules/4.3.0-kali1-amd64/build'
    Makefile:1041recipe for target 'modules' failed
    make
    : *** [modulesError 2
    ##################################################
    Compile make driver error2
    Please check error Mesg
    ################################################## 
    and i don't know what to do can you help me?

  21. #121
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Quote Originally Posted by xxchipetxx View Post
    i've got the usb-ac 56 from asus with linux drivers, it has a "install.sh" script i've tried to run it like "chmod 777 install.sh" and "./install.sh" the error messages are

    PHP Code:
    make[1]: Entering directory '/lib/modules/4.3.0-kali1-amd64/build'
    make[1]: *** No rule to make target 'modules'.  Stop.
    make[1]: Leaving directory '/lib/modules/4.3.0-kali1-amd64/build'
    Makefile:1041recipe for target 'modules' failed
    make
    : *** [modulesError 2
    ##################################################
    Compile make driver error2
    Please check error Mesg
    ################################################## 
    and i don't know what to do can you help me?
    Can you show the output of uname-a?

  22. #122
    Join Date
    2017-Feb
    Posts
    1
    Hello everyone and thanks for reading me, (Sorry for my english I'm french)
    I post here, I hope it is ok, it seems to be the place where we can talk about network issues.

    I bought my AWUS036H, I connect it to my Mac, VMWARE Fusion asks to what system I want it to connect the AWUS I select Linux.
    In Linux, no green light on the cart but when I do "airman-ng" my cart is detected 1/2, and when it is detected I can do monitoring "airman-ng start wlan0" and the answer is good. But, even when it's detected :

    - first, I can't selected a wifi, only the icon wifi appears, nothing else.
    - And when I want to do a any test with my wifi, for example with airman-ng or here with Fluxion, the card disconnect every time when it is used. I take a picture to show you my problem.
    - Sometimes the cart is detected, but 2 minutes later, it is not detected anymore.

    I tried to found drivers but they seems to not work in my case. I try to reinstall
    my Virtual Machine but it don't help too.

    Example of the problem :
    problème wlan.jpg

    I don't know why it happened, because I read that the drivers are normally already installed in kali, so I don't understand,
    Thanks for reading me

  23. #123
    Join Date
    2017-Apr
    Posts
    1
    Hello. Im new beginner Linux, and I can't find a driver for my USB wifi Although I downloaded the driver from the TP-Link homepage but I can't install it on kali linux, my adapter is TL-WN822N version 4.0 and using a chipset TRL8192EU.
    Please help me

  24. #124
    Join Date
    2017-Apr
    Posts
    1

    TP-LINK TL-WN722N V2 not showing as Atheros (Realtek instead) and not working in VM

    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.

    Below is some output of a few commands:

    iwconfig

    Code:
    root@kali:~# iwconfig
    eth1      no wireless extensions.
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.


    ifconfig


    Code:
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
            inet6 fe80::a00:27ff:fe27:6d4  prefixlen 64  scopeid 0x20<link>
            ether 08:00:27:27:06:d4  txqueuelen 1000  (Ethernet)
            RX packets 13246  bytes 12272521 (11.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 5316  bytes 404986 (395.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            ether 08:00:27:36:07:8e  txqueuelen 1000  (Ethernet)
            RX packets 26  bytes 3796 (3.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 18  bytes 1860 (1.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 868  bytes 67932 (66.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 868  bytes 67932 (66.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:


    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 2357:010c  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    I tried:
    • Making sure it's uninstalled in the host machine
    • Installing the compat-drivers
    • Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
    • Reinstalling in the host machine the latest drivers
    • Connecting the USB to other slot
    • Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
    • Changing the filter to USB 3.0


    The machine I'm using is a Dell XPS15.

    Thank you for any help, it is greatly appreciated.

  25. #125
    Join Date
    2017-May
    Posts
    1
    Quote Originally Posted by victorgonal View Post
    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux.
    Thank you for any help, it is greatly appreciated.
    Hello, I have the exact same problem here. The only difference is my machine (not a Dell XPS). But I'm French as well...
    Thanks in advance for any help

  26. #126
    Join Date
    2017-May
    Posts
    1
    Quote Originally Posted by victorgonal View Post
    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.

    Below is some output of a few commands:

    iwconfig

    Code:
    root@kali:~# iwconfig
    eth1      no wireless extensions.
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.


    ifconfig


    Code:
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
            inet6 fe80::a00:27ff:fe27:6d4  prefixlen 64  scopeid 0x20<link>
            ether 08:00:27:27:06:d4  txqueuelen 1000  (Ethernet)
            RX packets 13246  bytes 12272521 (11.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 5316  bytes 404986 (395.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            ether 08:00:27:36:07:8e  txqueuelen 1000  (Ethernet)
            RX packets 26  bytes 3796 (3.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 18  bytes 1860 (1.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 868  bytes 67932 (66.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 868  bytes 67932 (66.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:


    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 2357:010c  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    I tried:
    • Making sure it's uninstalled in the host machine
    • Installing the compat-drivers
    • Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
    • Reinstalling in the host machine the latest drivers
    • Connecting the USB to other slot
    • Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
    • Changing the filter to USB 3.0


    The machine I'm using is a Dell XPS15.

    Thank you for any help, it is greatly appreciated.
    I found the reason. The TP-LINK TL-WN722N adapter you used must be version 2.0. You can check the version on the tag located on the back of the adapter or on the bottom of the package box. Change it to version 1.X then it will work.

  27. #127

    Question Broadcom 4360 drivers not being loaded

    Hello everyone,
    Spent massive amount of time trying to get my wireless to work on Macbook Pro (Retina). I am running Kali Linux (rolling) on Mac with Dual Boot.
    My wireless card is Broadcom 4360.

    lspci -vv output shortly was:
    Network controller: Broadcom Corporation BCM4360 802.11ac Wireless Network Adapter (rev 03)

    I googled around and the current default drivers on Kali are not loading (they would be wrong anyway). So I tried follow the following guide since this should enable Broadcom 4360 properly: https://wiki.debian.org/wl
    I follow steps 1-3 but I got an error on step 4.
    The thing is I should be running version 4.9 but for some reason when I try to do 'modprobe wl' I get a fatal error - for some reason the command looks for the file in the 4.6 version and cant find it.

    See attached the output from step 1-4 with the error.

    Can anyone help me understand why i can't make it load the right driver - how do i change it to look in the right place?

    Code:
    root@kali:~# apt-get update
    Hit:1 http://kali.koyanet.lv/kali kali-rolling InRelease
    Reading package lists... Done
    root@kali:~# apt-get install linux-image-$(uname -r|sed 's,[^-]*-[^-]*-,,') linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    linux-headers-amd64 is already the newest version (4.9+80+kali1).
    linux-image-amd64 is already the newest version (4.9+80+kali1).
    broadcom-sta-dkms is already the newest version (6.30.223.271-5).
    0 upgraded, 0 newly installed, 0 to remove and 1679 not upgraded.
    root@kali:~# modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
    root@kali:~# modprobe wl
    modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64

  28. #128
    Hello from Mexico excuse me, I hope you can endenteder since I do not know English and I do not write it either, so I use a translation to communicate with you. And installed kali linux on a laptop dell inspiron 5000 series and I could not, I do not know how to install the wifi driver, I have an integrated wifi card (dual band wireless-ac 3165). Will there be drivers for this type of wifi card? And if there is ... how do you install? Since I am new to linux and especially in kali linux, God bless you and thank you very much, I hope your prompt help.

  29. #129
    Join Date
    2016-Oct
    Location
    /dev/sda
    Posts
    1,012
    Quote Originally Posted by [email protected] View Post
    Hello from Mexico excuse me, I hope you can endenteder since I do not know English and I do not write it either, so I use a translation to communicate with you. And installed kali linux on a laptop dell inspiron 5000 series and I could not, I do not know how to install the wifi driver, I have an integrated wifi card (dual band wireless-ac 3165). Will there be drivers for this type of wifi card? And if there is ... how do you install? Since I am new to linux and especially in kali linux, God bless you and thank you very much, I hope your prompt help.
    Drivers for your wifi adapter come pre-installed in kali.

  30. #130
    Join Date
    2017-Jun
    Posts
    1
    Hello

    MediaTek 3570 error

    pls help me

    root@root:~/5370# make
    make -C tools
    make[1]: Entering directory '/root/5370/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory '/root/5370/tools'
    /root/5370/tools/bin2h
    cp -f os/linux/Makefile.6 /root/5370/os/linux/Makefile
    make -C /lib/modules/4.0.0-kali1-amd64/build SUBDIRS=/root/5370/os/linux modules
    make[1]: *** /lib/modules/4.0.0-kali1-amd64/build: No such file or directory. Stop.
    Makefile:388: recipe for target 'LINUX' failed
    make: *** [LINUX] Error 2

  31. #131
    Join Date
    2017-Jun
    Posts
    1
    Quote Originally Posted by victorgonal View Post
    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.

    Below is some output of a few commands:

    iwconfig

    Code:
    root@kali:~# iwconfig
    eth1      no wireless extensions.
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.


    ifconfig


    Code:
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
            inet6 fe80::a00:27ff:fe27:6d4  prefixlen 64  scopeid 0x20<link>
            ether 08:00:27:27:06:d4  txqueuelen 1000  (Ethernet)
            RX packets 13246  bytes 12272521 (11.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 5316  bytes 404986 (395.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            ether 08:00:27:36:07:8e  txqueuelen 1000  (Ethernet)
            RX packets 26  bytes 3796 (3.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 18  bytes 1860 (1.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 868  bytes 67932 (66.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 868  bytes 67932 (66.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:


    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 2357:010c  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    I tried:
    • Making sure it's uninstalled in the host machine
    • Installing the compat-drivers
    • Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
    • Reinstalling in the host machine the latest drivers
    • Connecting the USB to other slot
    • Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
    • Changing the filter to USB 3.0


    The machine I'm using is a Dell XPS15.

    Thank you for any help, it is greatly appreciated.
    TP-LINK TL-WN722N V1 - Atheros
    TP-LINK TL-WN722N V2 - Relatek

    Unfortunately tp-link used to use different chipsets between 2 versions of same card...

    I had same issue and I solved it by porting official TP-link driver to work with kernel 4.9.

    You can obtain fixed driver from:
    https://github.com/mfruba/kernel/tre...2N_v2.0-Ralink

  32. #132
    Join Date
    2016-Mar
    Posts
    7
    Hello all,
    I just got a TP Link TL-WN722N Wireless card earlier today, and have been trying to get it to work for the past 5 days. I've done a ton of research, and am absolutely tearing my hair out trying to solve this supposedly simple problem. From what I have read, the chipset driver is already included in the kernel and shouldn't need to be downloaded. However, when I run "ifconfig" or "iwconfig" I only get my 3 standard devices: lo, wlan0 and eth0. It should be showing up as wlan1, but nothing. I am testing it in a functioning USB port, and have tested the adapter on my Windows computer with success. I know it isn't detected because the green light inside the adapter that blinks when a machine detects it has been silent while it is in my Kali machine.

    I was able to download the drivers for the adapter from TP-link's website, but I don't know how to build it. There is no tar.gz, no .exe, and no files with endings other than a wpa_0_8.conf. Everything else has no file type. There is a Makefile, but I don't know how to use it. ./configure, sudo make and sudo make install just return errors. I think the drivers are probably installed, but I'm not sure.

    lsusb shows a device that I have identified as the wireless card, but there is no comment/information text that follows the bus and device id. Running "dmesg | tail" shows me that the usb device is connected, and tells me that it is a Realtek card. Again, there is no output in iwconfig.

    I would greatly appreciate some help with this issue. If you need any more information, please let me know and I would be happy to supply it so that I can solve this.
    Thanks,
    u/GarrukApex
    Last edited by GarrukApex; 2017-06-22 at 15:31.

  33. #133
    Join Date
    2017-Jun
    Posts
    3

    Ralink Technology, Corp. MT7601U Wireless Adapter not working

    Hi, I'm a newbie to linux. I have installed Kali Linux on virtualbox on a windows 10 host machine. So, I bought this Ralink Technology, Corp. MT7601U chipset wireless usb adapter and it doesnt seem to be working well. Details: -
    uname -r
    Code:
    4.9.0-kali4-amd64
    lsusb
    Code:
    Bus 001 Device 002: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    lsmod
    Code:
    Module Size Used by
    mt7601u 102400 0
    mac80211 671744 1 mt7601u
    cfg80211 589824 2 mac80211,mt7601u
    fuse 98304 3
    nfnetlink_queue 24576 0
    nfnetlink_log 20480 0
    nfnetlink 16384 2 nfnetlink_log,nfnetlink_queue
    bluetooth 552960 0
    rfkill 24576 4 bluetooth,cfg80211
    vboxsf 45056 1
    vboxvideo 53248 3
    vboxguest 286720 8 vboxsf,vboxvideo
    snd_intel8x0 40960 2
    iTCO_wdt 16384 0
    snd_ac97_codec 126976 1 snd_intel8x0
    iTCO_vendor_support 16384 1 iTCO_wdt
    ac97_bus 16384 1 snd_ac97_codec
    ppdev 20480 0
    intel_rapl_perf 16384 0
    snd_pcm 110592 2 snd_ac97_codec,snd_intel8x0
    evdev 24576 15
    pcspkr 16384 0
    serio_raw 16384 0
    snd_timer 32768 1 snd_pcm
    snd 86016 8 snd_ac97_codec,snd_timer,snd_intel8x0,snd_pcm
    lpc_ich 24576 0
    parport_pc 28672 0
    mfd_core 16384 1 lpc_ich
    soundcore 16384 1 snd
    sg 32768 0
    ttm 98304 1 vboxvideo
    parport 49152 2 parport_pc,ppdev
    drm_kms_helper 155648 1 vboxvideo
    battery 20480 0
    ac 16384 0
    rng_core 16384 0
    drm 360448 6 vboxvideo,ttm,drm_kms_helper
    video 40960 0
    button 16384 0
    acpi_cpufreq 20480 0
    binfmt_misc 20480 1
    ip_tables 24576 0
    x_tables 36864 1 ip_tables
    autofs4 40960 2
    ext4 585728 1
    crc16 16384 2 bluetooth,ext4
    jbd2 106496 1 ext4
    crc32c_generic 16384 0
    fscrypto 28672 1 ext4
    ecb 16384 0
    mbcache 16384 2 ext4
    sr_mod 24576 0
    cdrom 61440 1 sr_mod
    sd_mod 45056 3
    ata_generic 16384 0
    ohci_pci 16384 0
    crct10dif_pclmul 16384 0
    crc32_pclmul 16384 0
    crc32c_intel 24576 2
    ghash_clmulni_intel 16384 0
    virtio_net 28672 0
    aesni_intel 167936 0
    aes_x86_64 20480 1 aesni_intel
    lrw 16384 1 aesni_intel
    gf128mul 16384 1 lrw
    glue_helper 16384 1 aesni_intel
    ablk_helper 16384 1 aesni_intel
    cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
    ohci_hcd 53248 1 ohci_pci
    ehci_pci 16384 0
    ehci_hcd 81920 1 ehci_pci
    psmouse 135168 0
    ata_piix 36864 0
    ahci 36864 2
    usbcore 249856 5 mt7601u,ehci_hcd,ohci_pci,ohci_hcd,ehci_pci
    libahci 32768 1 ahci
    usb_common 16384 1 usbcore
    virtio_pci 24576 0
    virtio_ring 24576 2 virtio_net,virtio_pci
    virtio 16384 2 virtio_net,virtio_pci
    i2c_piix4 24576 0
    libata 249856 4 ahci,ata_piix,libahci,ata_generic
    scsi_mod 225280 4 sd_mod,libata,sr_mod,sg
    dmesg|grep 7601
    Code:
    [  563.416832] usb 1-1: New USB device found, idVendor=148f, idProduct=7601
    [  564.333104] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision: 76010500
    [  564.419351] mt7601u 1-1:1.0: firmware: direct-loading firmware mt7601u.bin
    [  564.419370] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
    [  567.979134] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  571.304372] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  574.694433] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  577.993564] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  581.320345] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  584.641453] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  588.007887] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  591.294394] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  594.654008] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  598.010915] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  601.305165] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    [  604.663621] mt7601u 1-1:1.0: Vendor request req:07 off:0730 failed:-110
    I have already used this chip with my host to test whether the hardware was faulty or not. It worked great on my host machine for endless time.
    The problem I face is that when i plug it in, it works fine for like 5 minutes and then the it stops working at all. Replugging doesn't help, I can use it again for 5 minutes again after I reboot.
    I would be glad if someone could help me out please!!!

  34. #134
    Join Date
    2017-Jun
    Posts
    3
    It has a realtek rtl8188eus chipset. Try instructions on this website https://l33ttutorials.wordpress.com/...-kali-linux-2/. It worked for me.
    P.S. it doesnt support monitor mode.

  35. #135
    Join Date
    2017-Jun
    Posts
    3
    make[1]: *** /lib/modules/4.0.0-kali1-amd64/build: No such file or directory. Stop.
    Try making this directory if you are using kali live
    Code:
    mkdir /lib/modules/$(uname -r)/build -f
    Most probably it should exist if you are using installed version of kali linux.
    Run this if you are using installed kali
    Code:
    sudo apt-get update
    sudo apt-get dist-upgrade
    reboot
    sudo apt-get install linux-headers-$(uname -r)
    reboot

  36. #136
    Join Date
    2017-Jun
    Posts
    1
    Quote Originally Posted by GarrukApex View Post
    Hello all,
    I just got a TP Link TL-WN722N Wireless card earlier today, and have been trying to get it to work for the past 5 days. I've done a ton of research, and am absolutely tearing my hair out trying to solve this supposedly simple problem. From what I have read, the chipset driver is already included in the kernel and shouldn't need to be downloaded. However, when I run "ifconfig" or "iwconfig" I only get my 3 standard devices: lo, wlan0 and eth0. It should be showing up as wlan1, but nothing. I am testing it in a functioning USB port, and have tested the adapter on my Windows computer with success. I know it isn't detected because the green light inside the adapter that blinks when a machine detects it has been silent while it is in my Kali machine.

    I was able to download the drivers for the adapter from TP-link's website, but I don't know how to build it. There is no tar.gz, no .exe, and no files with endings other than a wpa_0_8.conf. Everything else has no file type. There is a Makefile, but I don't know how to use it. ./configure, sudo make and sudo make install just return errors. I think the drivers are probably installed, but I'm not sure.

    lsusb shows a device that I have identified as the wireless card, but there is no comment/information text that follows the bus and device id. Running "dmesg | tail" shows me that the usb device is connected, and tells me that it is a Realtek card. Again, there is no output in iwconfig.

    I would greatly appreciate some help with this issue. If you need any more information, please let me know and I would be happy to supply it so that I can solve this.
    Thanks,
    u/GarrukApex
    Just spent 3 days trying to get this dongle to work. There were a ton of different ideas most of which didn't work.

    I ended up installing Manges driver which almost worked - was able to connect to wireless and use network but both airmon-ng start wlan0 and ifconfig down, iwconfig wlan0 mode monitor failed to work.

    Tried jeremyb31 and the cu driver as well which also failed.

    Odd thing was while my dongle was connected and working airmon-ng was listing it as Phy Null and Driver ??????.

    I took the dongle outside and smashed it with a hammer and ordered the 722N which I know works. I shouldn't have done that to the dongle because it works perfectly in Windows. Not sure why we have 1980s themed problems like this in 2017 operating systems but it is what it is.

  37. #137
    Join Date
    2017-Jul
    Posts
    1
    mfruba, the only way I could get your 20150417 driver to work(4.4 won't build) under kali 4.9 is to first install lwfinger driver then your 20150417 driver. Also, TL-WN722N v2 Realtek green light does not work when running; airodump-ng was collecting but no light on usb device. Can you please provide details instructions?

  38. #138
    Join Date
    2017-Sep
    Posts
    1
    Hi, I have a AWUS051nh v2, with a Ralink RT3572 chipset
    When I fresh install Kali linux 2017.1 it works like a charm, but when I dist-upgraded to 4.12.0-kali1-amd64 it stated showing a weak wireless signal (it has less than half the bars and I am 1 meter away from the router), also it used to show like 30 Access point, and now its down to 5 or 6.
    I'm using 2800usb drivers, as I was when I first installed it.

    I did reinstall the firmware and tried to reinstall the driver, but I'm kinda new to linux (and pen-testing as well).

    Code:
    uname -a
    Linux Satelite 4.12.0-kali1-amd64 #1 SMP Debian 4.12.6-1kali6 (2017-08-30) x86_64 GNU/Linux
    Code:
    airmon-ng --verbose
    
    Distributor ID:	Kali
    Description:	Kali GNU/Linux Rolling
    Release:	kali-rolling
    Codename:	kali-rolling
    
    Linux Satelite 4.12.0-kali1-amd64 #1 SMP Debian 4.12.6-1kali6 (2017-08-30) x86_64 GNU/Linux
    
    K indicates driver is from 4.12.0-kali1-amd64
    V indicates driver comes directly from the vendor, almost certainly a bad thing
    S indicates driver comes from the staging tree, these drivers are meant for reference not actual use, BEWARE
    ? indicates we do not know where the driver comes from... report this
    
    
    X[PHY]Interface		Driver[Stack]-FirmwareRev		Chipset										Extended Info
    
    K[phy0]wlan0		iwlwifi[mac80211]-29.541020.0	Intel Corporation Wireless 7265 (rev 61)
    K[phy2]wlan1mon		rt2800usb[mac80211]-0.36		Ralink Technology, Corp. RT3572
    Code:
    00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35)
    00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35)
    00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35)
    00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35)
    00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 35)
    00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35)
    00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35)
    00:1c.3 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #4 (rev 35)
    00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35)
    00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 35)
    01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
    Code:
    wlan1     IEEE 802.11  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
              Retry short  long limit:2   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off

  39. #139
    Join Date
    2018-Jan
    Posts
    1
    I flashed Kali on a Oneplus One Android phone running lineageos, and I'm trying to get Kali to recognize the TL-WN722N version 2. Before trying to use this adapter on the phone, I was using it on a laptop running Galliumos linux. I installed the driver for the adapter using these commands

    Code:
    sudo apt install git dkms git make build-essential
    cd /usr/src
    sudo git clone https://github.com/lwfinger/rtl8188eu.git
    sudo dkms add ./rtl8188eu
    sudo dkms build 8188eu/1.0
    sudo dkms install 8188eu/1.0
    sudo modprobe 8188eu
    so I tried using the same commands in kali to install the driver on the Oneplus One.
    Kali executed the first four commands, but when I typed
    Code:
    dkms build 8188eu/1.0
    I got an error:

    Code:
    root@kali:/usr/src# dkms build 8188eu/1.0
    Error! echo
    Your kernel headers for kernel 3.4.112-lineageos-g70467aa5 cannot be found at
    /lib/modules/3.4.112-lineageos-g70467aa5/build or /lib/modules/3.4.112-lineageos-g70467aa5/source.
    root@kali:/usr/src#
    Is there a solution for this?

  40. #140
    Join Date
    2018-Feb
    Posts
    1
    Hello Community,

    Last night I spent at least 5 hours trying to get wi-fi working on my laptop after a fresh Kali install. The online research let me to the compat wireless driver, after installing it the Wi-Fi interface shows up but it won't discover any networks and even after reading countless of guides and watching several youtube videos I am still not closer to the solution. One thing to note is that after the driver installation, when I go to network manager and try to see if there are any wi-fi networks available, the LED light on my wi-fi button on the keyboard is flickering white (normally its continuous orange when its off), so it gives me the impression that it's somehow trying to discover new networks but they don't show.

    My laptop: HP Envy 15 j140-na
    You can find the specs here: https://support.hp.com/gb-en/document/c04350018

    I started fresh again, took some screenshots to show the situation.

    Before compat driver installation:

    https://drive.google.com/open?id=0B1...RaYnVaZElrN3B3 (Network Manager Wi-Fi screen)
    https://drive.google.com/open?id=0B1...l5QW94REZjR0hV (airmon-ng command screen)
    https://drive.google.com/open?id=0B1...JlX1pEMGVoTFVF (lsusb/lspci command screen)

    After compat driver installation:
    https://drive.google.com/open?id=0B1...NCYXF1QWpHQ2ww (Network Manager Wi-Fi screen)
    https://drive.google.com/open?id=0B1...p3aFYxb2JiUWNn (ipconfig/iwconfig command screen)
    https://drive.google.com/open?id=0B1...M3SGljM2NSNzdr (dmesg | tail command screen)
    https://drive.google.com/open?id=0B1...xVN1hQQjBUWkZV (rfkill list command screen)
    https://drive.google.com/open?id=0B1...JHRlJpWmNIRFRR (airmon-ng, lsusb/lspci screen)

    I'm a Kali noob, installed the OS for the course I started doing so apologies if the solution is very simple and it's been covered in another thread.

    Appreciate the help and will be happy to provide any additional info if it helps.

    PS: The touchpad seems overly sensitive too and tapping on it doesn't count as clicking. Is this normal with Kali?

    Thanks!

  41. #141
    Hi, i run wifi adapter on monitor mode without killing process, now it is not working. when i connect it, it restart the laptop immediately. what should i do ?

  42. #142
    Join Date
    2016-Mar
    Posts
    2
    Wlan0 showing up but no networks. Wifi just shows a blank box and wifi settings does not show anything. Txpower is 0 and I have tried every command to fix it. Nothing changes it. Wlan0 is up and even shows networks when you put it it monitor mode using airmon-ng

  43. #143
    Hi all, I have a extremely frustrating problem i currently run kali on a VM on a MacBook Pro and i am trying to use my wireless card "Panda Wireless PAU09" it is a recommended card and is said to be "Plug and Play" without having to install drivers and/or configuring it, but this has not been the case for me.

    I can run 'iwconfig" "lsusb" and "dmesg" and all of them display the same thing "Bus 001 Device 002: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter" but after i looked deeper into "dmesg" it shows that it is loading the firmware "rt2800usb and rt2870.bin" being loaded and they are able to activate successfully but i still cannot see any wifi networks, the device is found but not networks are. When i run "dmesg" and run it twice an error pops up and says "IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready"

    I have installed all drivers that i can get my hands on, i have contacted panda and they gave me a "linux" driver which ended up being corrupt and non-working i also added a few blacklisted sources to aid the drivers and this was recommended by a few people and after doing so my wifi shows up for a few seconds then goes away. The sources are for the ralink driver family "http://cdn-fastly.deb.debian.org/debian jessie InRelease and http://cdn-fastly.deb.debian.org/debian Strech InRelease"

    If you have any solution i wad really appreciate a reply because i am going crazy trying to get my card working with kali.

  44. #144
    Join Date
    2018-Oct
    Posts
    1
    Hi,
    I have Kali on a bootable usb and when I try to run it I get this error: ''IPv6: ADDRCONF (NETDEV_UP): wlan0: link is not ready.''
    Please note:
    Kali is running from a bootable usb
    It is running on a laptop
    I googled endlessly for an answer
    I am a complete noob
    Any help would be appreciated,excuse my english and forgive me if I broke any of the forum rules,I am new here
    44129367_556875541439710_2936225542615072768_n.jpg

  45. #145
    Join Date
    2019-Mar
    Posts
    1
    Hey everyone

    I bought a new wireless card D-link dwa-192.it has rtl8814au

    i have tried to use it but i couldn't. kali doesn't recognize it at all
    i was trying to install drivers but i can't.

    any suggestion ???

  46. #146
    Hi
    I have 2 wifi adapters : alpha awus036nha (atheros 9271) un awus036ach (RTL 8812AU) on kali 3.0 dual boot on laptop and a wifi booster sunsanhs 2500sh . i try to use evil twin for a longe range . it worked in the past for a closed range with my nha . but my booster can boost only awus ach on kali (and boost them both on win 10) somy question is : is there a way to make my awus036nha reach longer range on kali ? Or do i need to upgrade my driver or bying a Yagi antenna?

  47. #147
    Join Date
    2016-Dec
    Posts
    806
    You need another antenna. Even if that existed, a driver upgrade will NEVER increase the range of wireless adapter. This is a piece of hardware.

  48. #148
    Join Date
    2019-Apr
    Posts
    1
    Dears, I have installed Kali 2019 as single boot on 15-Inch MacBook Pro (Mid-2017). but I'm facing many issues with my WiFi connection, i\m able to connect to my mobile phone hotspot but i cannot connect to my wifi home signal or any other signals available. could you please let me know how to solve this issue. my network card details are below:

    lspci -vnn | grep Network
    03:00.0 Network controller [0280]: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC [14e4:43ba] (rev 02)

  49. #149
    Join Date
    2019-May
    Posts
    1
    hello, I have a problem with a Kali with ath10k driver. the system shows the wifi panel but it doesn't show any wifi network. During installation I got that installation required 2 files (ath10k/pre-cal-pci-0000:01:00.0.bin and ath10k/cal-pci-0000:01:00.0.bin), I skipped that because I didn't have these files. Now The only thing that I found was this:

    systemctl status NetworkManager
    NetworkManager [489]: <error> [1557675162.6447] sup-iface[0x55c7b0cda390,wlan0]; error adding interface; wpa_supplicant couldn't grab this interface.

    uname -a
    Linux username 4.19.0-kali3-amd64 #1 SMP Debian 4.19.20-1kali1 (2019-02-14) x86_64 GNU/Linux

    I do not have Ethernet connection so the only way to fix is passing files with a USB pendrive.

  50. #150
    Join Date
    2019-Nov
    Posts
    4

    Wireless adapter doesnt show

    Hi i installed kali linux on virtualbox and i have a wireless adapter realtek rtl8812au but kali doesnt use my wireless adapter and it doesnt show itself i tried everything and i cant make it work i really need help on this.

    Thank you in advance

Similar Threads

  1. Troubleshooting - Confirm nvidia drivers
    By jamesmartin in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2015-09-11, 14:57
  2. troubleshooting for installing nvidia drivers on asus g551jm kali 2.0
    By HoseinHarami in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2015-08-23, 15:18
  3. Troubleshooting - Wireless Cards
    By g0tmi1k in forum Kali Linux TroubleShooting
    Replies: 0
    Last Post: 2014-03-26, 11:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •