Hello everyone! New user here i am running Kali 1.0.9 iso on VMware player.
I have purchased a BELKIN N300 wireless network adapter to be able to use airmon-ng.
When i start the VM (kali) it automatically connects the the USB adapter.
ifconfig
Code:
wlan0 Link encap:Ethernet HWaddr b4:75:0e:22:cd:f4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
however when i run airmon-ng nothing shows up
Code:
root@KALI:~# airmon-ng
Interface Chipset Driver
lsusb
Code:
root@KALI:~# lsusb
Bus 001 Device 002: ID 050d:845a Belkin Components F7D2101 802.11n Surf & Share Wireless Adapter v1000 [Realtek RTL8192SU]
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iwconfig
Code:
root@KALI:~# iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Managed Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
My next thoughts were that i needed to find and install the driver for RTL8192SU
I went to http://www.realtek.com.tw/downloads/...Downloads=true to download the driver. I downloaded it and unzip the file. I have already installed the VMware tools and i used
Code:
sudo apt-get install build-essential linux-headers-generic
I then tried
Code:
root@KALI:~/Desktop/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405# make
make: *** No targets specified and no makefile found. Stop.
I then went deeper to the driver file and uncompressed the .tgz and then tried
Code:
root@KALI:~/Desktop/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405# make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.12-kali1-amd64/build M=/root/Desktop/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405 modules
make: *** /lib/modules/3.12-kali1-amd64/build: No such file or directory. Stop.
make: *** [modules] Error 2
root@KALI:~/Desktop/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405#
At this point im lost I know that the Alfa works well with little issues from all sorts of post but i am trying to work through this for my own knowledge instead of giving up on it. If anyone can help or tell me that i am a retard and why it would be much appreciated.