Originally Posted by
P373
It should be pre-installed. I have the same card:
Code:
root@rooty:~# airmon-ng
PHY Interface Driver Chipset
phy0 wlan0 iwlwifi Intel Corporation Wireless 7265 (rev 61)
phy1 wlan1mon rt2800usb Ralink Technology, Corp. RT3572
root@rooty:~# aireplay-ng -9 wlan1mon
20:48:50 Trying broadcast probe requests...
20:48:50 Injection is working!
20:48:52 Found 4 APs
20:48:52 Trying directed probe requests...
20:48:52 B8:E6:25:6E:36:09 - channel: 9 - '2WIRE956'
20:48:57 Ping (min/avg/max): 1.693ms/2.998ms/4.328ms Power: -72.00
20:48:57 6/30: 20%
20:48:57 94:62:69:03:27:D0 - channel: 9 - 'ATTDjCHXi2'
20:48:59 Ping (min/avg/max): 1.296ms/5.850ms/25.545ms Power: -65.57
20:48:59 23/30: 76%
20:48:59 74:9D:DC:4E:83:39 - channel: 1 - '2WIRE460'
20:48:59 Ping (min/avg/max): 1.258ms/9.315ms/66.546ms Power: -36.07
20:48:59 30/30: 100%
20:48:59 FA:8F:CA:76:07:B3 - channel: 9 - ''
20:49:03 Ping (min/avg/max): 0.752ms/2.901ms/4.479ms Power: -21.60
20:49:03 10/30: 33%
Try using airmon-ng to start the interface.
Code:
root@kali:~# airmon-ng
PHY Interface Driver Chipset
phy0 wlan0 iwlwifi Intel Corporation Centrino Ultimate-N 6300 (rev 35)
phy1 wlan1 rt2800usb Ralink Technology, Corp. RT3572
root@kali:~# airmon-ng start wlan1
PHY Interface Driver Chipset
phy0 wlan0 iwlwifi Intel Corporation Centrino Ultimate-N 6300 (rev 35)
phy1 wlan1 rt2800usb Ralink Technology, Corp. RT3572
(mac80211 monitor mode vif enabled for [phy1]wlan1 on [phy1]wlan1mon)
(mac80211 station mode vif disabled for [phy1]wlan1)
root@kali:~# aireplay-ng -9 wlan1mon
13:24:16 Trying broadcast probe requests...
13:24:18 No Answer...
13:24:18 Found 0 APs
root@kali:~# aireplay-ng -9 wlan1mon
13:24:55 Trying broadcast probe requests...
13:24:56 No Answer...
13:24:56 Found 1 AP
13:24:56 Trying directed probe requests...
13:24:56 10:5F:06:1B:CE:05 - channel: 11 - 'CenturyLink3731'
13:25:02 0/30: 0%