We will try and address a few of these problems but we are only guessing as we have never seen such.
1. Are you using Kali-linux 1.07?
2. Vulpi the author has issued an updated version a few months ago you should download this.
3. We do not know what you mean when you say you installed Pwnstar9.0
You will though have to install two programs which Pwnstar9.0 will prompt you to install - incron and one other.
4. You should use your AWUSO36NH with airbase-ng.
5. Read thru all the entries in this thread
6. Setup item 4 and do not provide internet access first, - read our suggestions in the threads above. If your network-manager is trying to use your wifi device supporting airebase-ng to associate to a wifi station then association to your fakeAP is impossible.
You may be having a negative-one issue with airbase-ng BUT we are only guessing. Go here:
https://forums.kali.org/showthread.p...t=negative-one
You can download the script files at the link. Or you can try these commands which should work with your AWUSO36NH
airmon-ng stop mon0
airmon-ng stop mon1
airmon-ng stop mon2
ifconfig wlan0 down
iwconfig wlan0 mode monitor
ifconfig wlan0 up
iwconfig wlan0
ifconfig wlan0 down
macchanger -r wlan0
iw reg set BO
ifconfig wlan0 up
iwconfig wlan0 channel 13
iwconfig wlan0 txpower 30
iwconfig wlan0 rate 1M
airmon-ng start wlan0
ifconfig mon0 down
macchanger -r mon0
ifconfig mon0 up
Now try running Pwnstar and see if you are getting the channel hopping with airbase-ng.
If the channel problem remains try running airbase-ng from a terminal window and see what you get.
We cannot help you with ferret sorry.
MTB
